aha/drivers/hwmon/pc87427.c

645 lines
18 KiB
C
Raw Normal View History

/*
* pc87427.c - hardware monitoring driver for the
* National Semiconductor PC87427 Super-I/O chip
* Copyright (C) 2006 Jean Delvare <khali@linux-fr.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Supports the following chips:
*
* Chip #vin #fan #pwm #temp devid
* PC87427 - 8 - - 0xF2
*
* This driver assumes that no more than one chip is present.
* Only fan inputs are supported so far, although the chip can do much more.
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/platform_device.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/sysfs.h>
#include <linux/ioport.h>
#include <asm/io.h>
static unsigned short force_id;
module_param(force_id, ushort, 0);
MODULE_PARM_DESC(force_id, "Override the detected device ID");
static struct platform_device *pdev;
#define DRVNAME "pc87427"
/* The lock mutex protects both the I/O accesses (needed because the
device is using banked registers) and the register cache (needed to keep
the data in the registers and the cache in sync at any time). */
struct pc87427_data {
struct device *hwmon_dev;
struct mutex lock;
int address[2];
const char *name;
unsigned long last_updated; /* in jiffies */
u8 fan_enabled; /* bit vector */
u16 fan[8]; /* register values */
u16 fan_min[8]; /* register values */
u8 fan_status[8]; /* register values */
};
/*
* Super-I/O registers and operations
*/
#define SIOREG_LDSEL 0x07 /* Logical device select */
#define SIOREG_DEVID 0x20 /* Device ID */
#define SIOREG_ACT 0x30 /* Device activation */
#define SIOREG_MAP 0x50 /* I/O or memory mapping */
#define SIOREG_IOBASE 0x60 /* I/O base address */
static const u8 logdev[2] = { 0x09, 0x14 };
static const char *logdev_str[2] = { DRVNAME " FMC", DRVNAME " HMC" };
#define LD_FAN 0
#define LD_IN 1
#define LD_TEMP 1
static inline void superio_outb(int sioaddr, int reg, int val)
{
outb(reg, sioaddr);
outb(val, sioaddr + 1);
}
static inline int superio_inb(int sioaddr, int reg)
{
outb(reg, sioaddr);
return inb(sioaddr + 1);
}
static inline void superio_exit(int sioaddr)
{
outb(0x02, sioaddr);
outb(0x02, sioaddr + 1);
}
/*
* Logical devices
*/
#define REGION_LENGTH 32
#define PC87427_REG_BANK 0x0f
#define BANK_FM(nr) (nr)
#define BANK_FT(nr) (0x08 + (nr))
#define BANK_FC(nr) (0x10 + (nr) * 2)
/*
* I/O access functions
*/
/* ldi is the logical device index */
static inline int pc87427_read8(struct pc87427_data *data, u8 ldi, u8 reg)
{
return inb(data->address[ldi] + reg);
}
/* Must be called with data->lock held, except during init */
static inline int pc87427_read8_bank(struct pc87427_data *data, u8 ldi,
u8 bank, u8 reg)
{
outb(bank, data->address[ldi] + PC87427_REG_BANK);
return inb(data->address[ldi] + reg);
}
/* Must be called with data->lock held, except during init */
static inline void pc87427_write8_bank(struct pc87427_data *data, u8 ldi,
u8 bank, u8 reg, u8 value)
{
outb(bank, data->address[ldi] + PC87427_REG_BANK);
outb(value, data->address[ldi] + reg);
}
/*
* Fan registers and conversions
*/
/* fan data registers are 16-bit wide */
#define PC87427_REG_FAN 0x12
#define PC87427_REG_FAN_MIN 0x14
#define PC87427_REG_FAN_STATUS 0x10
#define FAN_STATUS_STALL (1 << 3)
#define FAN_STATUS_LOSPD (1 << 1)
#define FAN_STATUS_MONEN (1 << 0)
/* Dedicated function to read all registers related to a given fan input.
This saves us quite a few locks and bank selections.
Must be called with data->lock held.
nr is from 0 to 7 */
static void pc87427_readall_fan(struct pc87427_data *data, u8 nr)
{
int iobase = data->address[LD_FAN];
outb(BANK_FM(nr), iobase + PC87427_REG_BANK);
data->fan[nr] = inw(iobase + PC87427_REG_FAN);
data->fan_min[nr] = inw(iobase + PC87427_REG_FAN_MIN);
data->fan_status[nr] = inb(iobase + PC87427_REG_FAN_STATUS);
/* Clear fan alarm bits */
outb(data->fan_status[nr], iobase + PC87427_REG_FAN_STATUS);
}
/* The 2 LSB of fan speed registers are used for something different.
The actual 2 LSB of the measurements are not available. */
static inline unsigned long fan_from_reg(u16 reg)
{
reg &= 0xfffc;
if (reg == 0x0000 || reg == 0xfffc)
return 0;
return 5400000UL / reg;
}
/* The 2 LSB of the fan speed limit registers are not significant. */
static inline u16 fan_to_reg(unsigned long val)
{
if (val < 83UL)
return 0xffff;
if (val >= 1350000UL)
return 0x0004;
return ((1350000UL + val / 2) / val) << 2;
}
/*
* Data interface
*/
static struct pc87427_data *pc87427_update_device(struct device *dev)
{
struct pc87427_data *data = dev_get_drvdata(dev);
int i;
mutex_lock(&data->lock);
if (!time_after(jiffies, data->last_updated + HZ)
&& data->last_updated)
goto done;
/* Fans */
for (i = 0; i < 8; i++) {
if (!(data->fan_enabled & (1 << i)))
continue;
pc87427_readall_fan(data, i);
}
data->last_updated = jiffies;
done:
mutex_unlock(&data->lock);
return data;
}
static ssize_t show_fan_input(struct device *dev, struct device_attribute
*devattr, char *buf)
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct pc87427_data *data = pc87427_update_device(dev);
int nr = attr->index;
return sprintf(buf, "%lu\n", fan_from_reg(data->fan[nr]));
}
static ssize_t show_fan_min(struct device *dev, struct device_attribute
*devattr, char *buf)
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct pc87427_data *data = pc87427_update_device(dev);
int nr = attr->index;
return sprintf(buf, "%lu\n", fan_from_reg(data->fan_min[nr]));
}
static ssize_t show_fan_alarm(struct device *dev, struct device_attribute
*devattr, char *buf)
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct pc87427_data *data = pc87427_update_device(dev);
int nr = attr->index;
return sprintf(buf, "%d\n", !!(data->fan_status[nr]
& FAN_STATUS_LOSPD));
}
static ssize_t show_fan_fault(struct device *dev, struct device_attribute
*devattr, char *buf)
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
struct pc87427_data *data = pc87427_update_device(dev);
int nr = attr->index;
return sprintf(buf, "%d\n", !!(data->fan_status[nr]
& FAN_STATUS_STALL));
}
static ssize_t set_fan_min(struct device *dev, struct device_attribute
*devattr, const char *buf, size_t count)
{
struct pc87427_data *data = dev_get_drvdata(dev);
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
int nr = attr->index;
unsigned long val = simple_strtoul(buf, NULL, 10);
int iobase = data->address[LD_FAN];
mutex_lock(&data->lock);
outb(BANK_FM(nr), iobase + PC87427_REG_BANK);
/* The low speed limit registers are read-only while monitoring
is enabled, so we have to disable monitoring, then change the
limit, and finally enable monitoring again. */
outb(0, iobase + PC87427_REG_FAN_STATUS);
data->fan_min[nr] = fan_to_reg(val);
outw(data->fan_min[nr], iobase + PC87427_REG_FAN_MIN);
outb(FAN_STATUS_MONEN, iobase + PC87427_REG_FAN_STATUS);
mutex_unlock(&data->lock);
return count;
}
static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan_input, NULL, 0);
static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan_input, NULL, 1);
static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, show_fan_input, NULL, 2);
static SENSOR_DEVICE_ATTR(fan4_input, S_IRUGO, show_fan_input, NULL, 3);
static SENSOR_DEVICE_ATTR(fan5_input, S_IRUGO, show_fan_input, NULL, 4);
static SENSOR_DEVICE_ATTR(fan6_input, S_IRUGO, show_fan_input, NULL, 5);
static SENSOR_DEVICE_ATTR(fan7_input, S_IRUGO, show_fan_input, NULL, 6);
static SENSOR_DEVICE_ATTR(fan8_input, S_IRUGO, show_fan_input, NULL, 7);
static SENSOR_DEVICE_ATTR(fan1_min, S_IWUSR | S_IRUGO,
show_fan_min, set_fan_min, 0);
static SENSOR_DEVICE_ATTR(fan2_min, S_IWUSR | S_IRUGO,
show_fan_min, set_fan_min, 1);
static SENSOR_DEVICE_ATTR(fan3_min, S_IWUSR | S_IRUGO,
show_fan_min, set_fan_min, 2);
static SENSOR_DEVICE_ATTR(fan4_min, S_IWUSR | S_IRUGO,
show_fan_min, set_fan_min, 3);
static SENSOR_DEVICE_ATTR(fan5_min, S_IWUSR | S_IRUGO,
show_fan_min, set_fan_min, 4);
static SENSOR_DEVICE_ATTR(fan6_min, S_IWUSR | S_IRUGO,
show_fan_min, set_fan_min, 5);
static SENSOR_DEVICE_ATTR(fan7_min, S_IWUSR | S_IRUGO,
show_fan_min, set_fan_min, 6);
static SENSOR_DEVICE_ATTR(fan8_min, S_IWUSR | S_IRUGO,
show_fan_min, set_fan_min, 7);
static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_fan_alarm, NULL, 0);
static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_fan_alarm, NULL, 1);
static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_fan_alarm, NULL, 2);
static SENSOR_DEVICE_ATTR(fan4_alarm, S_IRUGO, show_fan_alarm, NULL, 3);
static SENSOR_DEVICE_ATTR(fan5_alarm, S_IRUGO, show_fan_alarm, NULL, 4);
static SENSOR_DEVICE_ATTR(fan6_alarm, S_IRUGO, show_fan_alarm, NULL, 5);
static SENSOR_DEVICE_ATTR(fan7_alarm, S_IRUGO, show_fan_alarm, NULL, 6);
static SENSOR_DEVICE_ATTR(fan8_alarm, S_IRUGO, show_fan_alarm, NULL, 7);
static SENSOR_DEVICE_ATTR(fan1_fault, S_IRUGO, show_fan_fault, NULL, 0);
static SENSOR_DEVICE_ATTR(fan2_fault, S_IRUGO, show_fan_fault, NULL, 1);
static SENSOR_DEVICE_ATTR(fan3_fault, S_IRUGO, show_fan_fault, NULL, 2);
static SENSOR_DEVICE_ATTR(fan4_fault, S_IRUGO, show_fan_fault, NULL, 3);
static SENSOR_DEVICE_ATTR(fan5_fault, S_IRUGO, show_fan_fault, NULL, 4);
static SENSOR_DEVICE_ATTR(fan6_fault, S_IRUGO, show_fan_fault, NULL, 5);
static SENSOR_DEVICE_ATTR(fan7_fault, S_IRUGO, show_fan_fault, NULL, 6);
static SENSOR_DEVICE_ATTR(fan8_fault, S_IRUGO, show_fan_fault, NULL, 7);
static struct attribute *pc87427_attributes_fan[8][5] = {
{
&sensor_dev_attr_fan1_input.dev_attr.attr,
&sensor_dev_attr_fan1_min.dev_attr.attr,
&sensor_dev_attr_fan1_alarm.dev_attr.attr,
&sensor_dev_attr_fan1_fault.dev_attr.attr,
NULL
}, {
&sensor_dev_attr_fan2_input.dev_attr.attr,
&sensor_dev_attr_fan2_min.dev_attr.attr,
&sensor_dev_attr_fan2_alarm.dev_attr.attr,
&sensor_dev_attr_fan2_fault.dev_attr.attr,
NULL
}, {
&sensor_dev_attr_fan3_input.dev_attr.attr,
&sensor_dev_attr_fan3_min.dev_attr.attr,
&sensor_dev_attr_fan3_alarm.dev_attr.attr,
&sensor_dev_attr_fan3_fault.dev_attr.attr,
NULL
}, {
&sensor_dev_attr_fan4_input.dev_attr.attr,
&sensor_dev_attr_fan4_min.dev_attr.attr,
&sensor_dev_attr_fan4_alarm.dev_attr.attr,
&sensor_dev_attr_fan4_fault.dev_attr.attr,
NULL
}, {
&sensor_dev_attr_fan5_input.dev_attr.attr,
&sensor_dev_attr_fan5_min.dev_attr.attr,
&sensor_dev_attr_fan5_alarm.dev_attr.attr,
&sensor_dev_attr_fan5_fault.dev_attr.attr,
NULL
}, {
&sensor_dev_attr_fan6_input.dev_attr.attr,
&sensor_dev_attr_fan6_min.dev_attr.attr,
&sensor_dev_attr_fan6_alarm.dev_attr.attr,
&sensor_dev_attr_fan6_fault.dev_attr.attr,
NULL
}, {
&sensor_dev_attr_fan7_input.dev_attr.attr,
&sensor_dev_attr_fan7_min.dev_attr.attr,
&sensor_dev_attr_fan7_alarm.dev_attr.attr,
&sensor_dev_attr_fan7_fault.dev_attr.attr,
NULL
}, {
&sensor_dev_attr_fan8_input.dev_attr.attr,
&sensor_dev_attr_fan8_min.dev_attr.attr,
&sensor_dev_attr_fan8_alarm.dev_attr.attr,
&sensor_dev_attr_fan8_fault.dev_attr.attr,
NULL
}
};
static const struct attribute_group pc87427_group_fan[8] = {
{ .attrs = pc87427_attributes_fan[0] },
{ .attrs = pc87427_attributes_fan[1] },
{ .attrs = pc87427_attributes_fan[2] },
{ .attrs = pc87427_attributes_fan[3] },
{ .attrs = pc87427_attributes_fan[4] },
{ .attrs = pc87427_attributes_fan[5] },
{ .attrs = pc87427_attributes_fan[6] },
{ .attrs = pc87427_attributes_fan[7] },
};
static ssize_t show_name(struct device *dev, struct device_attribute
*devattr, char *buf)
{
struct pc87427_data *data = dev_get_drvdata(dev);
return sprintf(buf, "%s\n", data->name);
}
static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
/*
* Device detection, attach and detach
*/
static void __devinit pc87427_init_device(struct device *dev)
{
struct pc87427_data *data = dev_get_drvdata(dev);
int i;
u8 reg;
/* The FMC module should be ready */
reg = pc87427_read8(data, LD_FAN, PC87427_REG_BANK);
if (!(reg & 0x80))
dev_warn(dev, "FMC module not ready!\n");
/* Check which fans are enabled */
for (i = 0; i < 8; i++) {
reg = pc87427_read8_bank(data, LD_FAN, BANK_FM(i),
PC87427_REG_FAN_STATUS);
if (reg & FAN_STATUS_MONEN)
data->fan_enabled |= (1 << i);
}
if (!data->fan_enabled) {
dev_dbg(dev, "Enabling all fan inputs\n");
for (i = 0; i < 8; i++)
pc87427_write8_bank(data, LD_FAN, BANK_FM(i),
PC87427_REG_FAN_STATUS,
FAN_STATUS_MONEN);
data->fan_enabled = 0xff;
}
}
static int __devinit pc87427_probe(struct platform_device *pdev)
{
struct pc87427_data *data;
struct resource *res;
int i, err;
if (!(data = kzalloc(sizeof(struct pc87427_data), GFP_KERNEL))) {
err = -ENOMEM;
printk(KERN_ERR DRVNAME ": Out of memory\n");
goto exit;
}
/* This will need to be revisited when we add support for
temperature and voltage monitoring. */
res = platform_get_resource(pdev, IORESOURCE_IO, 0);
if (!request_region(res->start, res->end - res->start + 1, DRVNAME)) {
err = -EBUSY;
dev_err(&pdev->dev, "Failed to request region 0x%lx-0x%lx\n",
(unsigned long)res->start, (unsigned long)res->end);
goto exit_kfree;
}
data->address[0] = res->start;
mutex_init(&data->lock);
data->name = "pc87427";
platform_set_drvdata(pdev, data);
pc87427_init_device(&pdev->dev);
/* Register sysfs hooks */
if ((err = device_create_file(&pdev->dev, &dev_attr_name)))
goto exit_release_region;
for (i = 0; i < 8; i++) {
if (!(data->fan_enabled & (1 << i)))
continue;
if ((err = sysfs_create_group(&pdev->dev.kobj,
&pc87427_group_fan[i])))
goto exit_remove_files;
}
data->hwmon_dev = hwmon_device_register(&pdev->dev);
if (IS_ERR(data->hwmon_dev)) {
err = PTR_ERR(data->hwmon_dev);
dev_err(&pdev->dev, "Class registration failed (%d)\n", err);
goto exit_remove_files;
}
return 0;
exit_remove_files:
for (i = 0; i < 8; i++) {
if (!(data->fan_enabled & (1 << i)))
continue;
sysfs_remove_group(&pdev->dev.kobj, &pc87427_group_fan[i]);
}
exit_release_region:
release_region(res->start, res->end - res->start + 1);
exit_kfree:
platform_set_drvdata(pdev, NULL);
kfree(data);
exit:
return err;
}
static int __devexit pc87427_remove(struct platform_device *pdev)
{
struct pc87427_data *data = platform_get_drvdata(pdev);
struct resource *res;
int i;
hwmon_device_unregister(data->hwmon_dev);
device_remove_file(&pdev->dev, &dev_attr_name);
for (i = 0; i < 8; i++) {
if (!(data->fan_enabled & (1 << i)))
continue;
sysfs_remove_group(&pdev->dev.kobj, &pc87427_group_fan[i]);
}
platform_set_drvdata(pdev, NULL);
kfree(data);
res = platform_get_resource(pdev, IORESOURCE_IO, 0);
release_region(res->start, res->end - res->start + 1);
return 0;
}
static struct platform_driver pc87427_driver = {
.driver = {
.owner = THIS_MODULE,
.name = DRVNAME,
},
.probe = pc87427_probe,
.remove = __devexit_p(pc87427_remove),
};
static int __init pc87427_device_add(unsigned short address)
{
struct resource res = {
.start = address,
.end = address + REGION_LENGTH - 1,
.name = logdev_str[0],
.flags = IORESOURCE_IO,
};
int err;
pdev = platform_device_alloc(DRVNAME, address);
if (!pdev) {
err = -ENOMEM;
printk(KERN_ERR DRVNAME ": Device allocation failed\n");
goto exit;
}
err = platform_device_add_resources(pdev, &res, 1);
if (err) {
printk(KERN_ERR DRVNAME ": Device resource addition failed "
"(%d)\n", err);
goto exit_device_put;
}
err = platform_device_add(pdev);
if (err) {
printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n",
err);
goto exit_device_put;
}
return 0;
exit_device_put:
platform_device_put(pdev);
exit:
return err;
}
static int __init pc87427_find(int sioaddr, unsigned short *address)
{
u16 val;
int i, err = 0;
/* Identify device */
val = force_id ? force_id : superio_inb(sioaddr, SIOREG_DEVID);
if (val != 0xf2) { /* PC87427 */
err = -ENODEV;
goto exit;
}
for (i = 0; i < 2; i++) {
address[i] = 0;
/* Select logical device */
superio_outb(sioaddr, SIOREG_LDSEL, logdev[i]);
val = superio_inb(sioaddr, SIOREG_ACT);
if (!(val & 0x01)) {
printk(KERN_INFO DRVNAME ": Logical device 0x%02x "
"not activated\n", logdev[i]);
continue;
}
val = superio_inb(sioaddr, SIOREG_MAP);
if (val & 0x01) {
printk(KERN_WARNING DRVNAME ": Logical device 0x%02x "
"is memory-mapped, can't use\n", logdev[i]);
continue;
}
val = (superio_inb(sioaddr, SIOREG_IOBASE) << 8)
| superio_inb(sioaddr, SIOREG_IOBASE + 1);
if (!val) {
printk(KERN_INFO DRVNAME ": I/O base address not set "
"for logical device 0x%02x\n", logdev[i]);
continue;
}
address[i] = val;
}
exit:
superio_exit(sioaddr);
return err;
}
static int __init pc87427_init(void)
{
int err;
unsigned short address[2];
if (pc87427_find(0x2e, address)
&& pc87427_find(0x4e, address))
return -ENODEV;
/* For now the driver only handles fans so we only care about the
first address. */
if (!address[0])
return -ENODEV;
err = platform_driver_register(&pc87427_driver);
if (err)
goto exit;
/* Sets global pdev as a side effect */
err = pc87427_device_add(address[0]);
if (err)
goto exit_driver;
return 0;
exit_driver:
platform_driver_unregister(&pc87427_driver);
exit:
return err;
}
static void __exit pc87427_exit(void)
{
platform_device_unregister(pdev);
platform_driver_unregister(&pc87427_driver);
}
MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>");
MODULE_DESCRIPTION("PC87427 hardware monitoring driver");
MODULE_LICENSE("GPL");
module_init(pc87427_init);
module_exit(pc87427_exit);