aha/kernel/sched_rt.c

852 lines
20 KiB
C
Raw Normal View History

/*
* Real-Time Scheduling Class (mapped to the SCHED_FIFO and SCHED_RR
* policies)
*/
#ifdef CONFIG_SMP
static cpumask_t rt_overload_mask;
static atomic_t rto_count;
static inline int rt_overloaded(void)
{
return atomic_read(&rto_count);
}
static inline cpumask_t *rt_overload(void)
{
return &rt_overload_mask;
}
static inline void rt_set_overload(struct rq *rq)
{
rq->rt.overloaded = 1;
cpu_set(rq->cpu, rt_overload_mask);
/*
* Make sure the mask is visible before we set
* the overload count. That is checked to determine
* if we should look at the mask. It would be a shame
* if we looked at the mask, but the mask was not
* updated yet.
*/
wmb();
atomic_inc(&rto_count);
}
static inline void rt_clear_overload(struct rq *rq)
{
/* the order here really doesn't matter */
atomic_dec(&rto_count);
cpu_clear(rq->cpu, rt_overload_mask);
rq->rt.overloaded = 0;
}
sched: add RT-balance cpu-weight Some RT tasks (particularly kthreads) are bound to one specific CPU. It is fairly common for two or more bound tasks to get queued up at the same time. Consider, for instance, softirq_timer and softirq_sched. A timer goes off in an ISR which schedules softirq_thread to run at RT50. Then the timer handler determines that it's time to smp-rebalance the system so it schedules softirq_sched to run. So we are in a situation where we have two RT50 tasks queued, and the system will go into rt-overload condition to request other CPUs for help. This causes two problems in the current code: 1) If a high-priority bound task and a low-priority unbounded task queue up behind the running task, we will fail to ever relocate the unbounded task because we terminate the search on the first unmovable task. 2) We spend precious futile cycles in the fast-path trying to pull overloaded tasks over. It is therefore optimial to strive to avoid the overhead all together if we can cheaply detect the condition before overload even occurs. This patch tries to achieve this optimization by utilizing the hamming weight of the task->cpus_allowed mask. A weight of 1 indicates that the task cannot be migrated. We will then utilize this information to skip non-migratable tasks and to eliminate uncessary rebalance attempts. We introduce a per-rq variable to count the number of migratable tasks that are currently running. We only go into overload if we have more than one rt task, AND at least one of them is migratable. In addition, we introduce a per-task variable to cache the cpus_allowed weight, since the hamming calculation is probably relatively expensive. We only update the cached value when the mask is updated which should be relatively infrequent, especially compared to scheduling frequency in the fast path. Signed-off-by: Gregory Haskins <ghaskins@novell.com> Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-25 20:08:07 +00:00
static void update_rt_migration(struct rq *rq)
{
if (rq->rt.rt_nr_migratory && (rq->rt.rt_nr_running > 1))
rt_set_overload(rq);
else
rt_clear_overload(rq);
}
#endif /* CONFIG_SMP */
/*
* Update the current task's runtime statistics. Skip current tasks that
* are not in our scheduling class.
*/
static void update_curr_rt(struct rq *rq)
{
struct task_struct *curr = rq->curr;
u64 delta_exec;
if (!task_has_rt_policy(curr))
return;
delta_exec = rq->clock - curr->se.exec_start;
if (unlikely((s64)delta_exec < 0))
delta_exec = 0;
schedstat_set(curr->se.exec_max, max(curr->se.exec_max, delta_exec));
curr->se.sum_exec_runtime += delta_exec;
curr->se.exec_start = rq->clock;
sched: cpu accounting controller (V2) Commit cfb5285660aad4931b2ebbfa902ea48a37dfffa1 removed a useful feature for us, which provided a cpu accounting resource controller. This feature would be useful if someone wants to group tasks only for accounting purpose and doesnt really want to exercise any control over their cpu consumption. The patch below reintroduces the feature. It is based on Paul Menage's original patch (Commit 62d0df64065e7c135d0002f069444fbdfc64768f), with these differences: - Removed load average information. I felt it needs more thought (esp to deal with SMP and virtualized platforms) and can be added for 2.6.25 after more discussions. - Convert group cpu usage to be nanosecond accurate (as rest of the cfs stats are) and invoke cpuacct_charge() from the respective scheduler classes - Make accounting scalable on SMP systems by splitting the usage counter to be per-cpu - Move the code from kernel/cpu_acct.c to kernel/sched.c (since the code is not big enough to warrant a new file and also this rightly needs to live inside the scheduler. Also things like accessing rq->lock while reading cpu usage becomes easier if the code lived in kernel/sched.c) The patch also modifies the cpu controller not to provide the same accounting information. Tested-by: Balbir Singh <balbir@linux.vnet.ibm.com> Tested the patches on top of 2.6.24-rc3. The patches work fine. Ran some simple tests like cpuspin (spin on the cpu), ran several tasks in the same group and timed them. Compared their time stamps with cpuacct.usage. Signed-off-by: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com> Signed-off-by: Balbir Singh <balbir@linux.vnet.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-12-02 19:04:49 +00:00
cpuacct_charge(curr, delta_exec);
}
static inline void inc_rt_tasks(struct task_struct *p, struct rq *rq)
{
WARN_ON(!rt_task(p));
rq->rt.rt_nr_running++;
#ifdef CONFIG_SMP
if (p->prio < rq->rt.highest_prio)
rq->rt.highest_prio = p->prio;
sched: add RT-balance cpu-weight Some RT tasks (particularly kthreads) are bound to one specific CPU. It is fairly common for two or more bound tasks to get queued up at the same time. Consider, for instance, softirq_timer and softirq_sched. A timer goes off in an ISR which schedules softirq_thread to run at RT50. Then the timer handler determines that it's time to smp-rebalance the system so it schedules softirq_sched to run. So we are in a situation where we have two RT50 tasks queued, and the system will go into rt-overload condition to request other CPUs for help. This causes two problems in the current code: 1) If a high-priority bound task and a low-priority unbounded task queue up behind the running task, we will fail to ever relocate the unbounded task because we terminate the search on the first unmovable task. 2) We spend precious futile cycles in the fast-path trying to pull overloaded tasks over. It is therefore optimial to strive to avoid the overhead all together if we can cheaply detect the condition before overload even occurs. This patch tries to achieve this optimization by utilizing the hamming weight of the task->cpus_allowed mask. A weight of 1 indicates that the task cannot be migrated. We will then utilize this information to skip non-migratable tasks and to eliminate uncessary rebalance attempts. We introduce a per-rq variable to count the number of migratable tasks that are currently running. We only go into overload if we have more than one rt task, AND at least one of them is migratable. In addition, we introduce a per-task variable to cache the cpus_allowed weight, since the hamming calculation is probably relatively expensive. We only update the cached value when the mask is updated which should be relatively infrequent, especially compared to scheduling frequency in the fast path. Signed-off-by: Gregory Haskins <ghaskins@novell.com> Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-25 20:08:07 +00:00
if (p->nr_cpus_allowed > 1)
rq->rt.rt_nr_migratory++;
update_rt_migration(rq);
#endif /* CONFIG_SMP */
}
static inline void dec_rt_tasks(struct task_struct *p, struct rq *rq)
{
WARN_ON(!rt_task(p));
WARN_ON(!rq->rt.rt_nr_running);
rq->rt.rt_nr_running--;
#ifdef CONFIG_SMP
if (rq->rt.rt_nr_running) {
struct rt_prio_array *array;
WARN_ON(p->prio < rq->rt.highest_prio);
if (p->prio == rq->rt.highest_prio) {
/* recalculate */
array = &rq->rt.active;
rq->rt.highest_prio =
sched_find_first_bit(array->bitmap);
} /* otherwise leave rq->highest prio alone */
} else
rq->rt.highest_prio = MAX_RT_PRIO;
sched: add RT-balance cpu-weight Some RT tasks (particularly kthreads) are bound to one specific CPU. It is fairly common for two or more bound tasks to get queued up at the same time. Consider, for instance, softirq_timer and softirq_sched. A timer goes off in an ISR which schedules softirq_thread to run at RT50. Then the timer handler determines that it's time to smp-rebalance the system so it schedules softirq_sched to run. So we are in a situation where we have two RT50 tasks queued, and the system will go into rt-overload condition to request other CPUs for help. This causes two problems in the current code: 1) If a high-priority bound task and a low-priority unbounded task queue up behind the running task, we will fail to ever relocate the unbounded task because we terminate the search on the first unmovable task. 2) We spend precious futile cycles in the fast-path trying to pull overloaded tasks over. It is therefore optimial to strive to avoid the overhead all together if we can cheaply detect the condition before overload even occurs. This patch tries to achieve this optimization by utilizing the hamming weight of the task->cpus_allowed mask. A weight of 1 indicates that the task cannot be migrated. We will then utilize this information to skip non-migratable tasks and to eliminate uncessary rebalance attempts. We introduce a per-rq variable to count the number of migratable tasks that are currently running. We only go into overload if we have more than one rt task, AND at least one of them is migratable. In addition, we introduce a per-task variable to cache the cpus_allowed weight, since the hamming calculation is probably relatively expensive. We only update the cached value when the mask is updated which should be relatively infrequent, especially compared to scheduling frequency in the fast path. Signed-off-by: Gregory Haskins <ghaskins@novell.com> Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-25 20:08:07 +00:00
if (p->nr_cpus_allowed > 1)
rq->rt.rt_nr_migratory--;
update_rt_migration(rq);
#endif /* CONFIG_SMP */
}
static void enqueue_task_rt(struct rq *rq, struct task_struct *p, int wakeup)
{
struct rt_prio_array *array = &rq->rt.active;
list_add_tail(&p->run_list, array->queue + p->prio);
__set_bit(p->prio, array->bitmap);
inc_cpu_load(rq, p->se.load.weight);
inc_rt_tasks(p, rq);
}
/*
* Adding/removing a task to/from a priority array:
*/
static void dequeue_task_rt(struct rq *rq, struct task_struct *p, int sleep)
{
struct rt_prio_array *array = &rq->rt.active;
update_curr_rt(rq);
list_del(&p->run_list);
if (list_empty(array->queue + p->prio))
__clear_bit(p->prio, array->bitmap);
dec_cpu_load(rq, p->se.load.weight);
dec_rt_tasks(p, rq);
}
/*
* Put task to the end of the run list without the overhead of dequeue
* followed by enqueue.
*/
static void requeue_task_rt(struct rq *rq, struct task_struct *p)
{
struct rt_prio_array *array = &rq->rt.active;
list_move_tail(&p->run_list, array->queue + p->prio);
}
static void
yield_task_rt(struct rq *rq)
{
requeue_task_rt(rq, rq->curr);
}
#ifdef CONFIG_SMP
static int find_lowest_rq(struct task_struct *task);
static int select_task_rq_rt(struct task_struct *p, int sync)
{
struct rq *rq = task_rq(p);
/*
* If the current task is an RT task, then
* try to see if we can wake this RT task up on another
* runqueue. Otherwise simply start this RT task
* on its current runqueue.
*
* We want to avoid overloading runqueues. Even if
* the RT task is of higher priority than the current RT task.
* RT tasks behave differently than other tasks. If
* one gets preempted, we try to push it off to another queue.
* So trying to keep a preempting RT task on the same
* cache hot CPU will force the running RT task to
* a cold CPU. So we waste all the cache for the lower
* RT task in hopes of saving some of a RT task
* that is just being woken and probably will have
* cold cache anyway.
*/
if (unlikely(rt_task(rq->curr)) &&
(p->nr_cpus_allowed > 1)) {
int cpu = find_lowest_rq(p);
return (cpu == -1) ? task_cpu(p) : cpu;
}
/*
* Otherwise, just let it ride on the affined RQ and the
* post-schedule router will push the preempted task away
*/
return task_cpu(p);
}
#endif /* CONFIG_SMP */
/*
* Preempt the current task with a newly woken task if needed:
*/
static void check_preempt_curr_rt(struct rq *rq, struct task_struct *p)
{
if (p->prio < rq->curr->prio)
resched_task(rq->curr);
}
static struct task_struct *pick_next_task_rt(struct rq *rq)
{
struct rt_prio_array *array = &rq->rt.active;
struct task_struct *next;
struct list_head *queue;
int idx;
idx = sched_find_first_bit(array->bitmap);
if (idx >= MAX_RT_PRIO)
return NULL;
queue = array->queue + idx;
next = list_entry(queue->next, struct task_struct, run_list);
next->se.exec_start = rq->clock;
return next;
}
static void put_prev_task_rt(struct rq *rq, struct task_struct *p)
{
update_curr_rt(rq);
p->se.exec_start = 0;
}
#ifdef CONFIG_SMP
/* Only try algorithms three times */
#define RT_MAX_TRIES 3
static int double_lock_balance(struct rq *this_rq, struct rq *busiest);
static void deactivate_task(struct rq *rq, struct task_struct *p, int sleep);
static int pick_rt_task(struct rq *rq, struct task_struct *p, int cpu)
{
if (!task_running(rq, p) &&
sched: add RT-balance cpu-weight Some RT tasks (particularly kthreads) are bound to one specific CPU. It is fairly common for two or more bound tasks to get queued up at the same time. Consider, for instance, softirq_timer and softirq_sched. A timer goes off in an ISR which schedules softirq_thread to run at RT50. Then the timer handler determines that it's time to smp-rebalance the system so it schedules softirq_sched to run. So we are in a situation where we have two RT50 tasks queued, and the system will go into rt-overload condition to request other CPUs for help. This causes two problems in the current code: 1) If a high-priority bound task and a low-priority unbounded task queue up behind the running task, we will fail to ever relocate the unbounded task because we terminate the search on the first unmovable task. 2) We spend precious futile cycles in the fast-path trying to pull overloaded tasks over. It is therefore optimial to strive to avoid the overhead all together if we can cheaply detect the condition before overload even occurs. This patch tries to achieve this optimization by utilizing the hamming weight of the task->cpus_allowed mask. A weight of 1 indicates that the task cannot be migrated. We will then utilize this information to skip non-migratable tasks and to eliminate uncessary rebalance attempts. We introduce a per-rq variable to count the number of migratable tasks that are currently running. We only go into overload if we have more than one rt task, AND at least one of them is migratable. In addition, we introduce a per-task variable to cache the cpus_allowed weight, since the hamming calculation is probably relatively expensive. We only update the cached value when the mask is updated which should be relatively infrequent, especially compared to scheduling frequency in the fast path. Signed-off-by: Gregory Haskins <ghaskins@novell.com> Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-25 20:08:07 +00:00
(cpu < 0 || cpu_isset(cpu, p->cpus_allowed)) &&
(p->nr_cpus_allowed > 1))
return 1;
return 0;
}
/* Return the second highest RT task, NULL otherwise */
static struct task_struct *pick_next_highest_task_rt(struct rq *rq, int cpu)
{
struct rt_prio_array *array = &rq->rt.active;
struct task_struct *next;
struct list_head *queue;
int idx;
assert_spin_locked(&rq->lock);
if (likely(rq->rt.rt_nr_running < 2))
return NULL;
idx = sched_find_first_bit(array->bitmap);
if (unlikely(idx >= MAX_RT_PRIO)) {
WARN_ON(1); /* rt_nr_running is bad */
return NULL;
}
queue = array->queue + idx;
BUG_ON(list_empty(queue));
next = list_entry(queue->next, struct task_struct, run_list);
if (unlikely(pick_rt_task(rq, next, cpu)))
goto out;
if (queue->next->next != queue) {
/* same prio task */
next = list_entry(queue->next->next, struct task_struct,
run_list);
if (pick_rt_task(rq, next, cpu))
goto out;
}
retry:
/* slower, but more flexible */
idx = find_next_bit(array->bitmap, MAX_RT_PRIO, idx+1);
if (unlikely(idx >= MAX_RT_PRIO))
return NULL;
queue = array->queue + idx;
BUG_ON(list_empty(queue));
list_for_each_entry(next, queue, run_list) {
if (pick_rt_task(rq, next, cpu))
goto out;
}
goto retry;
out:
return next;
}
static DEFINE_PER_CPU(cpumask_t, local_cpu_mask);
static int find_lowest_cpus(struct task_struct *task, cpumask_t *lowest_mask)
{
int lowest_prio = -1;
int lowest_cpu = -1;
int count = 0;
int cpu;
cpus_and(*lowest_mask, cpu_online_map, task->cpus_allowed);
/*
* Scan each rq for the lowest prio.
*/
for_each_cpu_mask(cpu, *lowest_mask) {
struct rq *rq = cpu_rq(cpu);
/* We look for lowest RT prio or non-rt CPU */
if (rq->rt.highest_prio >= MAX_RT_PRIO) {
/*
* if we already found a low RT queue
* and now we found this non-rt queue
* clear the mask and set our bit.
* Otherwise just return the queue as is
* and the count==1 will cause the algorithm
* to use the first bit found.
*/
if (lowest_cpu != -1) {
cpus_clear(*lowest_mask);
cpu_set(rq->cpu, *lowest_mask);
}
return 1;
}
/* no locking for now */
if ((rq->rt.highest_prio > task->prio)
&& (rq->rt.highest_prio >= lowest_prio)) {
if (rq->rt.highest_prio > lowest_prio) {
/* new low - clear old data */
lowest_prio = rq->rt.highest_prio;
lowest_cpu = cpu;
count = 0;
}
count++;
} else
cpu_clear(cpu, *lowest_mask);
}
/*
* Clear out all the set bits that represent
* runqueues that were of higher prio than
* the lowest_prio.
*/
if (lowest_cpu > 0) {
/*
* Perhaps we could add another cpumask op to
* zero out bits. Like cpu_zero_bits(cpumask, nrbits);
* Then that could be optimized to use memset and such.
*/
for_each_cpu_mask(cpu, *lowest_mask) {
if (cpu >= lowest_cpu)
break;
cpu_clear(cpu, *lowest_mask);
}
}
return count;
}
static inline int pick_optimal_cpu(int this_cpu, cpumask_t *mask)
{
int first;
/* "this_cpu" is cheaper to preempt than a remote processor */
if ((this_cpu != -1) && cpu_isset(this_cpu, *mask))
return this_cpu;
first = first_cpu(*mask);
if (first != NR_CPUS)
return first;
return -1;
}
static int find_lowest_rq(struct task_struct *task)
{
struct sched_domain *sd;
cpumask_t *lowest_mask = &__get_cpu_var(local_cpu_mask);
int this_cpu = smp_processor_id();
int cpu = task_cpu(task);
int count = find_lowest_cpus(task, lowest_mask);
if (!count)
return -1; /* No targets found */
/*
* There is no sense in performing an optimal search if only one
* target is found.
*/
if (count == 1)
return first_cpu(*lowest_mask);
/*
* At this point we have built a mask of cpus representing the
* lowest priority tasks in the system. Now we want to elect
* the best one based on our affinity and topology.
*
* We prioritize the last cpu that the task executed on since
* it is most likely cache-hot in that location.
*/
if (cpu_isset(cpu, *lowest_mask))
return cpu;
/*
* Otherwise, we consult the sched_domains span maps to figure
* out which cpu is logically closest to our hot cache data.
*/
if (this_cpu == cpu)
this_cpu = -1; /* Skip this_cpu opt if the same */
for_each_domain(cpu, sd) {
if (sd->flags & SD_WAKE_AFFINE) {
cpumask_t domain_mask;
int best_cpu;
cpus_and(domain_mask, sd->span, *lowest_mask);
best_cpu = pick_optimal_cpu(this_cpu,
&domain_mask);
if (best_cpu != -1)
return best_cpu;
}
}
/*
* And finally, if there were no matches within the domains
* just give the caller *something* to work with from the compatible
* locations.
*/
return pick_optimal_cpu(this_cpu, lowest_mask);
}
/* Will lock the rq it finds */
static struct rq *find_lock_lowest_rq(struct task_struct *task,
struct rq *rq)
{
struct rq *lowest_rq = NULL;
int cpu;
int tries;
for (tries = 0; tries < RT_MAX_TRIES; tries++) {
cpu = find_lowest_rq(task);
if ((cpu == -1) || (cpu == rq->cpu))
break;
lowest_rq = cpu_rq(cpu);
/* if the prio of this runqueue changed, try again */
if (double_lock_balance(rq, lowest_rq)) {
/*
* We had to unlock the run queue. In
* the mean time, task could have
* migrated already or had its affinity changed.
* Also make sure that it wasn't scheduled on its rq.
*/
if (unlikely(task_rq(task) != rq ||
!cpu_isset(lowest_rq->cpu, task->cpus_allowed) ||
task_running(rq, task) ||
!task->se.on_rq)) {
spin_unlock(&lowest_rq->lock);
lowest_rq = NULL;
break;
}
}
/* If this rq is still suitable use it. */
if (lowest_rq->rt.highest_prio > task->prio)
break;
/* try again */
spin_unlock(&lowest_rq->lock);
lowest_rq = NULL;
}
return lowest_rq;
}
/*
* If the current CPU has more than one RT task, see if the non
* running task can migrate over to a CPU that is running a task
* of lesser priority.
*/
static int push_rt_task(struct rq *rq)
{
struct task_struct *next_task;
struct rq *lowest_rq;
int ret = 0;
int paranoid = RT_MAX_TRIES;
assert_spin_locked(&rq->lock);
if (!rq->rt.overloaded)
return 0;
next_task = pick_next_highest_task_rt(rq, -1);
if (!next_task)
return 0;
retry:
if (unlikely(next_task == rq->curr)) {
WARN_ON(1);
return 0;
}
/*
* It's possible that the next_task slipped in of
* higher priority than current. If that's the case
* just reschedule current.
*/
if (unlikely(next_task->prio < rq->curr->prio)) {
resched_task(rq->curr);
return 0;
}
/* We might release rq lock */
get_task_struct(next_task);
/* find_lock_lowest_rq locks the rq if found */
lowest_rq = find_lock_lowest_rq(next_task, rq);
if (!lowest_rq) {
struct task_struct *task;
/*
* find lock_lowest_rq releases rq->lock
* so it is possible that next_task has changed.
* If it has, then try again.
*/
task = pick_next_highest_task_rt(rq, -1);
if (unlikely(task != next_task) && task && paranoid--) {
put_task_struct(next_task);
next_task = task;
goto retry;
}
goto out;
}
assert_spin_locked(&lowest_rq->lock);
deactivate_task(rq, next_task, 0);
set_task_cpu(next_task, lowest_rq->cpu);
activate_task(lowest_rq, next_task, 0);
resched_task(lowest_rq->curr);
spin_unlock(&lowest_rq->lock);
ret = 1;
out:
put_task_struct(next_task);
return ret;
}
/*
* TODO: Currently we just use the second highest prio task on
* the queue, and stop when it can't migrate (or there's
* no more RT tasks). There may be a case where a lower
* priority RT task has a different affinity than the
* higher RT task. In this case the lower RT task could
* possibly be able to migrate where as the higher priority
* RT task could not. We currently ignore this issue.
* Enhancements are welcome!
*/
static void push_rt_tasks(struct rq *rq)
{
/* push_rt_task will return true if it moved an RT */
while (push_rt_task(rq))
;
}
static int pull_rt_task(struct rq *this_rq)
{
struct task_struct *next;
struct task_struct *p;
struct rq *src_rq;
cpumask_t *rto_cpumask;
int this_cpu = this_rq->cpu;
int cpu;
int ret = 0;
assert_spin_locked(&this_rq->lock);
/*
* If cpusets are used, and we have overlapping
* run queue cpusets, then this algorithm may not catch all.
* This is just the price you pay on trying to keep
* dirtying caches down on large SMP machines.
*/
if (likely(!rt_overloaded()))
return 0;
next = pick_next_task_rt(this_rq);
rto_cpumask = rt_overload();
for_each_cpu_mask(cpu, *rto_cpumask) {
if (this_cpu == cpu)
continue;
src_rq = cpu_rq(cpu);
if (unlikely(src_rq->rt.rt_nr_running <= 1)) {
/*
* It is possible that overlapping cpusets
* will miss clearing a non overloaded runqueue.
* Clear it now.
*/
if (double_lock_balance(this_rq, src_rq)) {
/* unlocked our runqueue lock */
struct task_struct *old_next = next;
next = pick_next_task_rt(this_rq);
if (next != old_next)
ret = 1;
}
if (likely(src_rq->rt.rt_nr_running <= 1))
/*
* Small chance that this_rq->curr changed
* but it's really harmless here.
*/
rt_clear_overload(this_rq);
else
/*
* Heh, the src_rq is now overloaded, since
* we already have the src_rq lock, go straight
* to pulling tasks from it.
*/
goto try_pulling;
spin_unlock(&src_rq->lock);
continue;
}
/*
* We can potentially drop this_rq's lock in
* double_lock_balance, and another CPU could
* steal our next task - hence we must cause
* the caller to recalculate the next task
* in that case:
*/
if (double_lock_balance(this_rq, src_rq)) {
struct task_struct *old_next = next;
next = pick_next_task_rt(this_rq);
if (next != old_next)
ret = 1;
}
/*
* Are there still pullable RT tasks?
*/
if (src_rq->rt.rt_nr_running <= 1) {
spin_unlock(&src_rq->lock);
continue;
}
try_pulling:
p = pick_next_highest_task_rt(src_rq, this_cpu);
/*
* Do we have an RT task that preempts
* the to-be-scheduled task?
*/
if (p && (!next || (p->prio < next->prio))) {
WARN_ON(p == src_rq->curr);
WARN_ON(!p->se.on_rq);
/*
* There's a chance that p is higher in priority
* than what's currently running on its cpu.
* This is just that p is wakeing up and hasn't
* had a chance to schedule. We only pull
* p if it is lower in priority than the
* current task on the run queue or
* this_rq next task is lower in prio than
* the current task on that rq.
*/
if (p->prio < src_rq->curr->prio ||
(next && next->prio < src_rq->curr->prio))
goto bail;
ret = 1;
deactivate_task(src_rq, p, 0);
set_task_cpu(p, this_cpu);
activate_task(this_rq, p, 0);
/*
* We continue with the search, just in
* case there's an even higher prio task
* in another runqueue. (low likelyhood
* but possible)
*/
/*
* Update next so that we won't pick a task
* on another cpu with a priority lower (or equal)
* than the one we just picked.
*/
next = p;
}
bail:
spin_unlock(&src_rq->lock);
}
return ret;
}
static void schedule_balance_rt(struct rq *rq,
struct task_struct *prev)
{
/* Try to pull RT tasks here if we lower this rq's prio */
if (unlikely(rt_task(prev)) &&
rq->rt.highest_prio > prev->prio)
pull_rt_task(rq);
}
static void schedule_tail_balance_rt(struct rq *rq)
{
/*
* If we have more than one rt_task queued, then
* see if we can push the other rt_tasks off to other CPUS.
* Note we may release the rq lock, and since
* the lock was owned by prev, we need to release it
* first via finish_lock_switch and then reaquire it here.
*/
if (unlikely(rq->rt.overloaded)) {
spin_lock_irq(&rq->lock);
push_rt_tasks(rq);
spin_unlock_irq(&rq->lock);
}
}
static void wakeup_balance_rt(struct rq *rq, struct task_struct *p)
{
if (unlikely(rt_task(p)) &&
!task_running(rq, p) &&
(p->prio >= rq->rt.highest_prio) &&
rq->rt.overloaded)
push_rt_tasks(rq);
}
sched: simplify move_tasks() The move_tasks() function is currently multiplexed with two distinct capabilities: 1. attempt to move a specified amount of weighted load from one run queue to another; and 2. attempt to move a specified number of tasks from one run queue to another. The first of these capabilities is used in two places, load_balance() and load_balance_idle(), and in both of these cases the return value of move_tasks() is used purely to decide if tasks/load were moved and no notice of the actual number of tasks moved is taken. The second capability is used in exactly one place, active_load_balance(), to attempt to move exactly one task and, as before, the return value is only used as an indicator of success or failure. This multiplexing of sched_task() was introduced, by me, as part of the smpnice patches and was motivated by the fact that the alternative, one function to move specified load and one to move a single task, would have led to two functions of roughly the same complexity as the old move_tasks() (or the new balance_tasks()). However, the new modular design of the new CFS scheduler allows a simpler solution to be adopted and this patch addresses that solution by: 1. adding a new function, move_one_task(), to be used by active_load_balance(); and 2. making move_tasks() a single purpose function that tries to move a specified weighted load and returns 1 for success and 0 for failure. One of the consequences of these changes is that neither move_one_task() or the new move_tasks() care how many tasks sched_class.load_balance() moves and this enables its interface to be simplified by returning the amount of load moved as its result and removing the load_moved pointer from the argument list. This helps simplify the new move_tasks() and slightly reduces the amount of work done in each of sched_class.load_balance()'s implementations. Further simplification, e.g. changes to balance_tasks(), are possible but (slightly) complicated by the special needs of load_balance_fair() so I've left them to a later patch (if this one gets accepted). NB Since move_tasks() gets called with two run queue locks held even small reductions in overhead are worthwhile. [ mingo@elte.hu ] this change also reduces code size nicely: text data bss dec hex filename 39216 3618 24 42858 a76a sched.o.before 39173 3618 24 42815 a73f sched.o.after Signed-off-by: Peter Williams <pwil3058@bigpond.net.au> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-08-09 09:16:46 +00:00
static unsigned long
load_balance_rt(struct rq *this_rq, int this_cpu, struct rq *busiest,
unsigned long max_load_move,
struct sched_domain *sd, enum cpu_idle_type idle,
int *all_pinned, int *this_best_prio)
{
/* don't touch RT tasks */
return 0;
}
static int
move_one_task_rt(struct rq *this_rq, int this_cpu, struct rq *busiest,
struct sched_domain *sd, enum cpu_idle_type idle)
{
/* don't touch RT tasks */
return 0;
}
sched: add RT-balance cpu-weight Some RT tasks (particularly kthreads) are bound to one specific CPU. It is fairly common for two or more bound tasks to get queued up at the same time. Consider, for instance, softirq_timer and softirq_sched. A timer goes off in an ISR which schedules softirq_thread to run at RT50. Then the timer handler determines that it's time to smp-rebalance the system so it schedules softirq_sched to run. So we are in a situation where we have two RT50 tasks queued, and the system will go into rt-overload condition to request other CPUs for help. This causes two problems in the current code: 1) If a high-priority bound task and a low-priority unbounded task queue up behind the running task, we will fail to ever relocate the unbounded task because we terminate the search on the first unmovable task. 2) We spend precious futile cycles in the fast-path trying to pull overloaded tasks over. It is therefore optimial to strive to avoid the overhead all together if we can cheaply detect the condition before overload even occurs. This patch tries to achieve this optimization by utilizing the hamming weight of the task->cpus_allowed mask. A weight of 1 indicates that the task cannot be migrated. We will then utilize this information to skip non-migratable tasks and to eliminate uncessary rebalance attempts. We introduce a per-rq variable to count the number of migratable tasks that are currently running. We only go into overload if we have more than one rt task, AND at least one of them is migratable. In addition, we introduce a per-task variable to cache the cpus_allowed weight, since the hamming calculation is probably relatively expensive. We only update the cached value when the mask is updated which should be relatively infrequent, especially compared to scheduling frequency in the fast path. Signed-off-by: Gregory Haskins <ghaskins@novell.com> Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-25 20:08:07 +00:00
static void set_cpus_allowed_rt(struct task_struct *p, cpumask_t *new_mask)
{
int weight = cpus_weight(*new_mask);
BUG_ON(!rt_task(p));
/*
* Update the migration status of the RQ if we have an RT task
* which is running AND changing its weight value.
*/
if (p->se.on_rq && (weight != p->nr_cpus_allowed)) {
struct rq *rq = task_rq(p);
if ((p->nr_cpus_allowed <= 1) && (weight > 1))
rq->rt.rt_nr_migratory++;
else if((p->nr_cpus_allowed > 1) && (weight <= 1)) {
BUG_ON(!rq->rt.rt_nr_migratory);
rq->rt.rt_nr_migratory--;
}
update_rt_migration(rq);
}
p->cpus_allowed = *new_mask;
p->nr_cpus_allowed = weight;
}
#else /* CONFIG_SMP */
# define schedule_tail_balance_rt(rq) do { } while (0)
# define schedule_balance_rt(rq, prev) do { } while (0)
# define wakeup_balance_rt(rq, p) do { } while (0)
#endif /* CONFIG_SMP */
static void task_tick_rt(struct rq *rq, struct task_struct *p)
{
update_curr_rt(rq);
/*
* RR tasks need a special form of timeslice management.
* FIFO tasks have no timeslices.
*/
if (p->policy != SCHED_RR)
return;
if (--p->time_slice)
return;
p->time_slice = DEF_TIMESLICE;
/*
* Requeue to the end of queue if we are not the only element
* on the queue:
*/
if (p->run_list.prev != p->run_list.next) {
requeue_task_rt(rq, p);
set_tsk_need_resched(p);
}
}
static void set_curr_task_rt(struct rq *rq)
{
struct task_struct *p = rq->curr;
p->se.exec_start = rq->clock;
}
const struct sched_class rt_sched_class = {
.next = &fair_sched_class,
.enqueue_task = enqueue_task_rt,
.dequeue_task = dequeue_task_rt,
.yield_task = yield_task_rt,
#ifdef CONFIG_SMP
.select_task_rq = select_task_rq_rt,
#endif /* CONFIG_SMP */
.check_preempt_curr = check_preempt_curr_rt,
.pick_next_task = pick_next_task_rt,
.put_prev_task = put_prev_task_rt,
#ifdef CONFIG_SMP
.load_balance = load_balance_rt,
.move_one_task = move_one_task_rt,
sched: add RT-balance cpu-weight Some RT tasks (particularly kthreads) are bound to one specific CPU. It is fairly common for two or more bound tasks to get queued up at the same time. Consider, for instance, softirq_timer and softirq_sched. A timer goes off in an ISR which schedules softirq_thread to run at RT50. Then the timer handler determines that it's time to smp-rebalance the system so it schedules softirq_sched to run. So we are in a situation where we have two RT50 tasks queued, and the system will go into rt-overload condition to request other CPUs for help. This causes two problems in the current code: 1) If a high-priority bound task and a low-priority unbounded task queue up behind the running task, we will fail to ever relocate the unbounded task because we terminate the search on the first unmovable task. 2) We spend precious futile cycles in the fast-path trying to pull overloaded tasks over. It is therefore optimial to strive to avoid the overhead all together if we can cheaply detect the condition before overload even occurs. This patch tries to achieve this optimization by utilizing the hamming weight of the task->cpus_allowed mask. A weight of 1 indicates that the task cannot be migrated. We will then utilize this information to skip non-migratable tasks and to eliminate uncessary rebalance attempts. We introduce a per-rq variable to count the number of migratable tasks that are currently running. We only go into overload if we have more than one rt task, AND at least one of them is migratable. In addition, we introduce a per-task variable to cache the cpus_allowed weight, since the hamming calculation is probably relatively expensive. We only update the cached value when the mask is updated which should be relatively infrequent, especially compared to scheduling frequency in the fast path. Signed-off-by: Gregory Haskins <ghaskins@novell.com> Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-25 20:08:07 +00:00
.set_cpus_allowed = set_cpus_allowed_rt,
#endif
.set_curr_task = set_curr_task_rt,
.task_tick = task_tick_rt,
};