aha/net/wireless/nl80211.c

4599 lines
106 KiB
C
Raw Normal View History

/*
* This is the new netlink-based wireless configuration interface.
*
* Copyright 2006-2009 Johannes Berg <johannes@sipsolutions.net>
*/
#include <linux/if.h>
#include <linux/module.h>
#include <linux/err.h>
#include <linux/list.h>
#include <linux/if_ether.h>
#include <linux/ieee80211.h>
#include <linux/nl80211.h>
#include <linux/rtnetlink.h>
#include <linux/netlink.h>
#include <linux/etherdevice.h>
#include <net/genetlink.h>
#include <net/cfg80211.h>
#include "core.h"
#include "nl80211.h"
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 06:19:48 +00:00
#include "reg.h"
/* the netlink family */
static struct genl_family nl80211_fam = {
.id = GENL_ID_GENERATE, /* don't bother with a hardcoded ID */
.name = "nl80211", /* have users key off the name instead */
.hdrsize = 0, /* no private header */
.version = 1, /* no particular meaning now */
.maxattr = NL80211_ATTR_MAX,
};
/* internal helper: get drv and dev */
static int get_drv_dev_by_info_ifindex(struct nlattr **attrs,
struct cfg80211_registered_device **drv,
struct net_device **dev)
{
int ifindex;
if (!attrs[NL80211_ATTR_IFINDEX])
return -EINVAL;
ifindex = nla_get_u32(attrs[NL80211_ATTR_IFINDEX]);
*dev = dev_get_by_index(&init_net, ifindex);
if (!*dev)
return -ENODEV;
*drv = cfg80211_get_dev_from_ifindex(ifindex);
if (IS_ERR(*drv)) {
dev_put(*dev);
return PTR_ERR(*drv);
}
return 0;
}
/* policy for the attributes */
static struct nla_policy nl80211_policy[NL80211_ATTR_MAX+1] __read_mostly = {
[NL80211_ATTR_WIPHY] = { .type = NLA_U32 },
[NL80211_ATTR_WIPHY_NAME] = { .type = NLA_NUL_STRING,
.len = 20-1 },
[NL80211_ATTR_WIPHY_TXQ_PARAMS] = { .type = NLA_NESTED },
[NL80211_ATTR_WIPHY_FREQ] = { .type = NLA_U32 },
[NL80211_ATTR_WIPHY_CHANNEL_TYPE] = { .type = NLA_U32 },
[NL80211_ATTR_WIPHY_RETRY_SHORT] = { .type = NLA_U8 },
[NL80211_ATTR_WIPHY_RETRY_LONG] = { .type = NLA_U8 },
[NL80211_ATTR_WIPHY_FRAG_THRESHOLD] = { .type = NLA_U32 },
[NL80211_ATTR_WIPHY_RTS_THRESHOLD] = { .type = NLA_U32 },
[NL80211_ATTR_IFTYPE] = { .type = NLA_U32 },
[NL80211_ATTR_IFINDEX] = { .type = NLA_U32 },
[NL80211_ATTR_IFNAME] = { .type = NLA_NUL_STRING, .len = IFNAMSIZ-1 },
[NL80211_ATTR_MAC] = { .type = NLA_BINARY, .len = ETH_ALEN },
[NL80211_ATTR_KEY_DATA] = { .type = NLA_BINARY,
.len = WLAN_MAX_KEY_LEN },
[NL80211_ATTR_KEY_IDX] = { .type = NLA_U8 },
[NL80211_ATTR_KEY_CIPHER] = { .type = NLA_U32 },
[NL80211_ATTR_KEY_DEFAULT] = { .type = NLA_FLAG },
[NL80211_ATTR_KEY_SEQ] = { .type = NLA_BINARY, .len = 8 },
[NL80211_ATTR_BEACON_INTERVAL] = { .type = NLA_U32 },
[NL80211_ATTR_DTIM_PERIOD] = { .type = NLA_U32 },
[NL80211_ATTR_BEACON_HEAD] = { .type = NLA_BINARY,
.len = IEEE80211_MAX_DATA_LEN },
[NL80211_ATTR_BEACON_TAIL] = { .type = NLA_BINARY,
.len = IEEE80211_MAX_DATA_LEN },
[NL80211_ATTR_STA_AID] = { .type = NLA_U16 },
[NL80211_ATTR_STA_FLAGS] = { .type = NLA_NESTED },
[NL80211_ATTR_STA_LISTEN_INTERVAL] = { .type = NLA_U16 },
[NL80211_ATTR_STA_SUPPORTED_RATES] = { .type = NLA_BINARY,
.len = NL80211_MAX_SUPP_RATES },
[NL80211_ATTR_STA_PLINK_ACTION] = { .type = NLA_U8 },
[NL80211_ATTR_STA_VLAN] = { .type = NLA_U32 },
[NL80211_ATTR_MNTR_FLAGS] = { /* NLA_NESTED can't be empty */ },
[NL80211_ATTR_MESH_ID] = { .type = NLA_BINARY,
.len = IEEE80211_MAX_MESH_ID_LEN },
[NL80211_ATTR_MPATH_NEXT_HOP] = { .type = NLA_U32 },
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 06:19:48 +00:00
[NL80211_ATTR_REG_ALPHA2] = { .type = NLA_STRING, .len = 2 },
[NL80211_ATTR_REG_RULES] = { .type = NLA_NESTED },
[NL80211_ATTR_BSS_CTS_PROT] = { .type = NLA_U8 },
[NL80211_ATTR_BSS_SHORT_PREAMBLE] = { .type = NLA_U8 },
[NL80211_ATTR_BSS_SHORT_SLOT_TIME] = { .type = NLA_U8 },
[NL80211_ATTR_BSS_BASIC_RATES] = { .type = NLA_BINARY,
.len = NL80211_MAX_SUPP_RATES },
[NL80211_ATTR_MESH_PARAMS] = { .type = NLA_NESTED },
[NL80211_ATTR_HT_CAPABILITY] = { .type = NLA_BINARY,
.len = NL80211_HT_CAPABILITY_LEN },
[NL80211_ATTR_MGMT_SUBTYPE] = { .type = NLA_U8 },
[NL80211_ATTR_IE] = { .type = NLA_BINARY,
.len = IEEE80211_MAX_DATA_LEN },
[NL80211_ATTR_SCAN_FREQUENCIES] = { .type = NLA_NESTED },
[NL80211_ATTR_SCAN_SSIDS] = { .type = NLA_NESTED },
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 11:39:22 +00:00
[NL80211_ATTR_SSID] = { .type = NLA_BINARY,
.len = IEEE80211_MAX_SSID_LEN },
[NL80211_ATTR_AUTH_TYPE] = { .type = NLA_U32 },
[NL80211_ATTR_REASON_CODE] = { .type = NLA_U16 },
[NL80211_ATTR_FREQ_FIXED] = { .type = NLA_FLAG },
[NL80211_ATTR_TIMED_OUT] = { .type = NLA_FLAG },
[NL80211_ATTR_USE_MFP] = { .type = NLA_U32 },
[NL80211_ATTR_STA_FLAGS2] = {
.len = sizeof(struct nl80211_sta_flag_update),
},
[NL80211_ATTR_CONTROL_PORT] = { .type = NLA_FLAG },
[NL80211_ATTR_PRIVACY] = { .type = NLA_FLAG },
[NL80211_ATTR_CIPHER_SUITE_GROUP] = { .type = NLA_U32 },
[NL80211_ATTR_WPA_VERSIONS] = { .type = NLA_U32 },
};
/* IE validation */
static bool is_valid_ie_attr(const struct nlattr *attr)
{
const u8 *pos;
int len;
if (!attr)
return true;
pos = nla_data(attr);
len = nla_len(attr);
while (len) {
u8 elemlen;
if (len < 2)
return false;
len -= 2;
elemlen = pos[1];
if (elemlen > len)
return false;
len -= elemlen;
pos += 2 + elemlen;
}
return true;
}
/* message building helper */
static inline void *nl80211hdr_put(struct sk_buff *skb, u32 pid, u32 seq,
int flags, u8 cmd)
{
/* since there is no private header just add the generic one */
return genlmsg_put(skb, pid, seq, &nl80211_fam, flags, cmd);
}
static int nl80211_msg_put_channel(struct sk_buff *msg,
struct ieee80211_channel *chan)
{
NLA_PUT_U32(msg, NL80211_FREQUENCY_ATTR_FREQ,
chan->center_freq);
if (chan->flags & IEEE80211_CHAN_DISABLED)
NLA_PUT_FLAG(msg, NL80211_FREQUENCY_ATTR_DISABLED);
if (chan->flags & IEEE80211_CHAN_PASSIVE_SCAN)
NLA_PUT_FLAG(msg, NL80211_FREQUENCY_ATTR_PASSIVE_SCAN);
if (chan->flags & IEEE80211_CHAN_NO_IBSS)
NLA_PUT_FLAG(msg, NL80211_FREQUENCY_ATTR_NO_IBSS);
if (chan->flags & IEEE80211_CHAN_RADAR)
NLA_PUT_FLAG(msg, NL80211_FREQUENCY_ATTR_RADAR);
NLA_PUT_U32(msg, NL80211_FREQUENCY_ATTR_MAX_TX_POWER,
DBM_TO_MBM(chan->max_power));
return 0;
nla_put_failure:
return -ENOBUFS;
}
/* netlink command implementations */
static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags,
struct cfg80211_registered_device *dev)
{
void *hdr;
struct nlattr *nl_bands, *nl_band;
struct nlattr *nl_freqs, *nl_freq;
struct nlattr *nl_rates, *nl_rate;
struct nlattr *nl_modes;
struct nlattr *nl_cmds;
enum ieee80211_band band;
struct ieee80211_channel *chan;
struct ieee80211_rate *rate;
int i;
u16 ifmodes = dev->wiphy.interface_modes;
hdr = nl80211hdr_put(msg, pid, seq, flags, NL80211_CMD_NEW_WIPHY);
if (!hdr)
return -1;
NLA_PUT_U32(msg, NL80211_ATTR_WIPHY, dev->wiphy_idx);
NLA_PUT_STRING(msg, NL80211_ATTR_WIPHY_NAME, wiphy_name(&dev->wiphy));
NLA_PUT_U8(msg, NL80211_ATTR_WIPHY_RETRY_SHORT,
dev->wiphy.retry_short);
NLA_PUT_U8(msg, NL80211_ATTR_WIPHY_RETRY_LONG,
dev->wiphy.retry_long);
NLA_PUT_U32(msg, NL80211_ATTR_WIPHY_FRAG_THRESHOLD,
dev->wiphy.frag_threshold);
NLA_PUT_U32(msg, NL80211_ATTR_WIPHY_RTS_THRESHOLD,
dev->wiphy.rts_threshold);
NLA_PUT_U8(msg, NL80211_ATTR_MAX_NUM_SCAN_SSIDS,
dev->wiphy.max_scan_ssids);
NLA_PUT_U16(msg, NL80211_ATTR_MAX_SCAN_IE_LEN,
dev->wiphy.max_scan_ie_len);
NLA_PUT(msg, NL80211_ATTR_CIPHER_SUITES,
sizeof(u32) * dev->wiphy.n_cipher_suites,
dev->wiphy.cipher_suites);
nl_modes = nla_nest_start(msg, NL80211_ATTR_SUPPORTED_IFTYPES);
if (!nl_modes)
goto nla_put_failure;
i = 0;
while (ifmodes) {
if (ifmodes & 1)
NLA_PUT_FLAG(msg, i);
ifmodes >>= 1;
i++;
}
nla_nest_end(msg, nl_modes);
nl_bands = nla_nest_start(msg, NL80211_ATTR_WIPHY_BANDS);
if (!nl_bands)
goto nla_put_failure;
for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
if (!dev->wiphy.bands[band])
continue;
nl_band = nla_nest_start(msg, band);
if (!nl_band)
goto nla_put_failure;
/* add HT info */
if (dev->wiphy.bands[band]->ht_cap.ht_supported) {
NLA_PUT(msg, NL80211_BAND_ATTR_HT_MCS_SET,
sizeof(dev->wiphy.bands[band]->ht_cap.mcs),
&dev->wiphy.bands[band]->ht_cap.mcs);
NLA_PUT_U16(msg, NL80211_BAND_ATTR_HT_CAPA,
dev->wiphy.bands[band]->ht_cap.cap);
NLA_PUT_U8(msg, NL80211_BAND_ATTR_HT_AMPDU_FACTOR,
dev->wiphy.bands[band]->ht_cap.ampdu_factor);
NLA_PUT_U8(msg, NL80211_BAND_ATTR_HT_AMPDU_DENSITY,
dev->wiphy.bands[band]->ht_cap.ampdu_density);
}
/* add frequencies */
nl_freqs = nla_nest_start(msg, NL80211_BAND_ATTR_FREQS);
if (!nl_freqs)
goto nla_put_failure;
for (i = 0; i < dev->wiphy.bands[band]->n_channels; i++) {
nl_freq = nla_nest_start(msg, i);
if (!nl_freq)
goto nla_put_failure;
chan = &dev->wiphy.bands[band]->channels[i];
if (nl80211_msg_put_channel(msg, chan))
goto nla_put_failure;
nla_nest_end(msg, nl_freq);
}
nla_nest_end(msg, nl_freqs);
/* add bitrates */
nl_rates = nla_nest_start(msg, NL80211_BAND_ATTR_RATES);
if (!nl_rates)
goto nla_put_failure;
for (i = 0; i < dev->wiphy.bands[band]->n_bitrates; i++) {
nl_rate = nla_nest_start(msg, i);
if (!nl_rate)
goto nla_put_failure;
rate = &dev->wiphy.bands[band]->bitrates[i];
NLA_PUT_U32(msg, NL80211_BITRATE_ATTR_RATE,
rate->bitrate);
if (rate->flags & IEEE80211_RATE_SHORT_PREAMBLE)
NLA_PUT_FLAG(msg,
NL80211_BITRATE_ATTR_2GHZ_SHORTPREAMBLE);
nla_nest_end(msg, nl_rate);
}
nla_nest_end(msg, nl_rates);
nla_nest_end(msg, nl_band);
}
nla_nest_end(msg, nl_bands);
nl_cmds = nla_nest_start(msg, NL80211_ATTR_SUPPORTED_COMMANDS);
if (!nl_cmds)
goto nla_put_failure;
i = 0;
#define CMD(op, n) \
do { \
if (dev->ops->op) { \
i++; \
NLA_PUT_U32(msg, i, NL80211_CMD_ ## n); \
} \
} while (0)
CMD(add_virtual_intf, NEW_INTERFACE);
CMD(change_virtual_intf, SET_INTERFACE);
CMD(add_key, NEW_KEY);
CMD(add_beacon, NEW_BEACON);
CMD(add_station, NEW_STATION);
CMD(add_mpath, NEW_MPATH);
CMD(set_mesh_params, SET_MESH_PARAMS);
CMD(change_bss, SET_BSS);
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 11:39:22 +00:00
CMD(auth, AUTHENTICATE);
CMD(assoc, ASSOCIATE);
CMD(deauth, DEAUTHENTICATE);
CMD(disassoc, DISASSOCIATE);
CMD(join_ibss, JOIN_IBSS);
#undef CMD
if (dev->ops->connect || dev->ops->auth) {
i++;
NLA_PUT_U32(msg, i, NL80211_CMD_CONNECT);
}
if (dev->ops->disconnect || dev->ops->deauth) {
i++;
NLA_PUT_U32(msg, i, NL80211_CMD_DISCONNECT);
}
nla_nest_end(msg, nl_cmds);
return genlmsg_end(msg, hdr);
nla_put_failure:
genlmsg_cancel(msg, hdr);
return -EMSGSIZE;
}
static int nl80211_dump_wiphy(struct sk_buff *skb, struct netlink_callback *cb)
{
int idx = 0;
int start = cb->args[0];
struct cfg80211_registered_device *dev;
mutex_lock(&cfg80211_mutex);
list_for_each_entry(dev, &cfg80211_drv_list, list) {
if (++idx <= start)
continue;
if (nl80211_send_wiphy(skb, NETLINK_CB(cb->skb).pid,
cb->nlh->nlmsg_seq, NLM_F_MULTI,
dev) < 0) {
idx--;
break;
}
}
mutex_unlock(&cfg80211_mutex);
cb->args[0] = idx;
return skb->len;
}
static int nl80211_get_wiphy(struct sk_buff *skb, struct genl_info *info)
{
struct sk_buff *msg;
struct cfg80211_registered_device *dev;
dev = cfg80211_get_dev_from_info(info);
if (IS_ERR(dev))
return PTR_ERR(dev);
msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
if (!msg)
goto out_err;
if (nl80211_send_wiphy(msg, info->snd_pid, info->snd_seq, 0, dev) < 0)
goto out_free;
cfg80211_put_dev(dev);
return genlmsg_unicast(msg, info->snd_pid);
out_free:
nlmsg_free(msg);
out_err:
cfg80211_put_dev(dev);
return -ENOBUFS;
}
static const struct nla_policy txq_params_policy[NL80211_TXQ_ATTR_MAX + 1] = {
[NL80211_TXQ_ATTR_QUEUE] = { .type = NLA_U8 },
[NL80211_TXQ_ATTR_TXOP] = { .type = NLA_U16 },
[NL80211_TXQ_ATTR_CWMIN] = { .type = NLA_U16 },
[NL80211_TXQ_ATTR_CWMAX] = { .type = NLA_U16 },
[NL80211_TXQ_ATTR_AIFS] = { .type = NLA_U8 },
};
static int parse_txq_params(struct nlattr *tb[],
struct ieee80211_txq_params *txq_params)
{
if (!tb[NL80211_TXQ_ATTR_QUEUE] || !tb[NL80211_TXQ_ATTR_TXOP] ||
!tb[NL80211_TXQ_ATTR_CWMIN] || !tb[NL80211_TXQ_ATTR_CWMAX] ||
!tb[NL80211_TXQ_ATTR_AIFS])
return -EINVAL;
txq_params->queue = nla_get_u8(tb[NL80211_TXQ_ATTR_QUEUE]);
txq_params->txop = nla_get_u16(tb[NL80211_TXQ_ATTR_TXOP]);
txq_params->cwmin = nla_get_u16(tb[NL80211_TXQ_ATTR_CWMIN]);
txq_params->cwmax = nla_get_u16(tb[NL80211_TXQ_ATTR_CWMAX]);
txq_params->aifs = nla_get_u8(tb[NL80211_TXQ_ATTR_AIFS]);
return 0;
}
static int nl80211_set_wiphy(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev;
int result = 0, rem_txq_params = 0;
struct nlattr *nl_txq_params;
u32 changed;
u8 retry_short = 0, retry_long = 0;
u32 frag_threshold = 0, rts_threshold = 0;
rtnl_lock();
mutex_lock(&cfg80211_mutex);
rdev = __cfg80211_drv_from_info(info);
if (IS_ERR(rdev)) {
mutex_unlock(&cfg80211_mutex);
result = PTR_ERR(rdev);
goto unlock;
}
mutex_lock(&rdev->mtx);
if (info->attrs[NL80211_ATTR_WIPHY_NAME])
result = cfg80211_dev_rename(
rdev, nla_data(info->attrs[NL80211_ATTR_WIPHY_NAME]));
mutex_unlock(&cfg80211_mutex);
if (result)
goto bad_res;
if (info->attrs[NL80211_ATTR_WIPHY_TXQ_PARAMS]) {
struct ieee80211_txq_params txq_params;
struct nlattr *tb[NL80211_TXQ_ATTR_MAX + 1];
if (!rdev->ops->set_txq_params) {
result = -EOPNOTSUPP;
goto bad_res;
}
nla_for_each_nested(nl_txq_params,
info->attrs[NL80211_ATTR_WIPHY_TXQ_PARAMS],
rem_txq_params) {
nla_parse(tb, NL80211_TXQ_ATTR_MAX,
nla_data(nl_txq_params),
nla_len(nl_txq_params),
txq_params_policy);
result = parse_txq_params(tb, &txq_params);
if (result)
goto bad_res;
result = rdev->ops->set_txq_params(&rdev->wiphy,
&txq_params);
if (result)
goto bad_res;
}
}
if (info->attrs[NL80211_ATTR_WIPHY_FREQ]) {
enum nl80211_channel_type channel_type = NL80211_CHAN_NO_HT;
struct ieee80211_channel *chan;
struct ieee80211_sta_ht_cap *ht_cap;
u32 freq;
if (!rdev->ops->set_channel) {
result = -EOPNOTSUPP;
goto bad_res;
}
result = -EINVAL;
if (info->attrs[NL80211_ATTR_WIPHY_CHANNEL_TYPE]) {
channel_type = nla_get_u32(info->attrs[
NL80211_ATTR_WIPHY_CHANNEL_TYPE]);
if (channel_type != NL80211_CHAN_NO_HT &&
channel_type != NL80211_CHAN_HT20 &&
channel_type != NL80211_CHAN_HT40PLUS &&
channel_type != NL80211_CHAN_HT40MINUS)
goto bad_res;
}
freq = nla_get_u32(info->attrs[NL80211_ATTR_WIPHY_FREQ]);
chan = ieee80211_get_channel(&rdev->wiphy, freq);
/* Primary channel not allowed */
if (!chan || chan->flags & IEEE80211_CHAN_DISABLED)
goto bad_res;
if (channel_type == NL80211_CHAN_HT40MINUS &&
(chan->flags & IEEE80211_CHAN_NO_HT40MINUS))
goto bad_res;
else if (channel_type == NL80211_CHAN_HT40PLUS &&
(chan->flags & IEEE80211_CHAN_NO_HT40PLUS))
goto bad_res;
/*
* At this point we know if that if HT40 was requested
* we are allowed to use it and the extension channel
* exists.
*/
ht_cap = &rdev->wiphy.bands[chan->band]->ht_cap;
/* no HT capabilities or intolerant */
if (channel_type != NL80211_CHAN_NO_HT) {
if (!ht_cap->ht_supported)
goto bad_res;
if (!(ht_cap->cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) ||
(ht_cap->cap & IEEE80211_HT_CAP_40MHZ_INTOLERANT))
goto bad_res;
}
result = rdev->ops->set_channel(&rdev->wiphy, chan,
channel_type);
if (result)
goto bad_res;
}
changed = 0;
if (info->attrs[NL80211_ATTR_WIPHY_RETRY_SHORT]) {
retry_short = nla_get_u8(
info->attrs[NL80211_ATTR_WIPHY_RETRY_SHORT]);
if (retry_short == 0) {
result = -EINVAL;
goto bad_res;
}
changed |= WIPHY_PARAM_RETRY_SHORT;
}
if (info->attrs[NL80211_ATTR_WIPHY_RETRY_LONG]) {
retry_long = nla_get_u8(
info->attrs[NL80211_ATTR_WIPHY_RETRY_LONG]);
if (retry_long == 0) {
result = -EINVAL;
goto bad_res;
}
changed |= WIPHY_PARAM_RETRY_LONG;
}
if (info->attrs[NL80211_ATTR_WIPHY_FRAG_THRESHOLD]) {
frag_threshold = nla_get_u32(
info->attrs[NL80211_ATTR_WIPHY_FRAG_THRESHOLD]);
if (frag_threshold < 256) {
result = -EINVAL;
goto bad_res;
}
if (frag_threshold != (u32) -1) {
/*
* Fragments (apart from the last one) are required to
* have even length. Make the fragmentation code
* simpler by stripping LSB should someone try to use
* odd threshold value.
*/
frag_threshold &= ~0x1;
}
changed |= WIPHY_PARAM_FRAG_THRESHOLD;
}
if (info->attrs[NL80211_ATTR_WIPHY_RTS_THRESHOLD]) {
rts_threshold = nla_get_u32(
info->attrs[NL80211_ATTR_WIPHY_RTS_THRESHOLD]);
changed |= WIPHY_PARAM_RTS_THRESHOLD;
}
if (changed) {
u8 old_retry_short, old_retry_long;
u32 old_frag_threshold, old_rts_threshold;
if (!rdev->ops->set_wiphy_params) {
result = -EOPNOTSUPP;
goto bad_res;
}
old_retry_short = rdev->wiphy.retry_short;
old_retry_long = rdev->wiphy.retry_long;
old_frag_threshold = rdev->wiphy.frag_threshold;
old_rts_threshold = rdev->wiphy.rts_threshold;
if (changed & WIPHY_PARAM_RETRY_SHORT)
rdev->wiphy.retry_short = retry_short;
if (changed & WIPHY_PARAM_RETRY_LONG)
rdev->wiphy.retry_long = retry_long;
if (changed & WIPHY_PARAM_FRAG_THRESHOLD)
rdev->wiphy.frag_threshold = frag_threshold;
if (changed & WIPHY_PARAM_RTS_THRESHOLD)
rdev->wiphy.rts_threshold = rts_threshold;
result = rdev->ops->set_wiphy_params(&rdev->wiphy, changed);
if (result) {
rdev->wiphy.retry_short = old_retry_short;
rdev->wiphy.retry_long = old_retry_long;
rdev->wiphy.frag_threshold = old_frag_threshold;
rdev->wiphy.rts_threshold = old_rts_threshold;
}
}
bad_res:
mutex_unlock(&rdev->mtx);
unlock:
rtnl_unlock();
return result;
}
static int nl80211_send_iface(struct sk_buff *msg, u32 pid, u32 seq, int flags,
struct cfg80211_registered_device *rdev,
struct net_device *dev)
{
void *hdr;
hdr = nl80211hdr_put(msg, pid, seq, flags, NL80211_CMD_NEW_INTERFACE);
if (!hdr)
return -1;
NLA_PUT_U32(msg, NL80211_ATTR_IFINDEX, dev->ifindex);
NLA_PUT_U32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx);
NLA_PUT_STRING(msg, NL80211_ATTR_IFNAME, dev->name);
NLA_PUT_U32(msg, NL80211_ATTR_IFTYPE, dev->ieee80211_ptr->iftype);
return genlmsg_end(msg, hdr);
nla_put_failure:
genlmsg_cancel(msg, hdr);
return -EMSGSIZE;
}
static int nl80211_dump_interface(struct sk_buff *skb, struct netlink_callback *cb)
{
int wp_idx = 0;
int if_idx = 0;
int wp_start = cb->args[0];
int if_start = cb->args[1];
struct cfg80211_registered_device *dev;
struct wireless_dev *wdev;
mutex_lock(&cfg80211_mutex);
list_for_each_entry(dev, &cfg80211_drv_list, list) {
if (wp_idx < wp_start) {
wp_idx++;
continue;
}
if_idx = 0;
mutex_lock(&dev->devlist_mtx);
list_for_each_entry(wdev, &dev->netdev_list, list) {
if (if_idx < if_start) {
if_idx++;
continue;
}
if (nl80211_send_iface(skb, NETLINK_CB(cb->skb).pid,
cb->nlh->nlmsg_seq, NLM_F_MULTI,
dev, wdev->netdev) < 0) {
mutex_unlock(&dev->devlist_mtx);
goto out;
}
if_idx++;
}
mutex_unlock(&dev->devlist_mtx);
wp_idx++;
}
out:
mutex_unlock(&cfg80211_mutex);
cb->args[0] = wp_idx;
cb->args[1] = if_idx;
return skb->len;
}
static int nl80211_get_interface(struct sk_buff *skb, struct genl_info *info)
{
struct sk_buff *msg;
struct cfg80211_registered_device *dev;
struct net_device *netdev;
int err;
err = get_drv_dev_by_info_ifindex(info->attrs, &dev, &netdev);
if (err)
return err;
msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
if (!msg)
goto out_err;
if (nl80211_send_iface(msg, info->snd_pid, info->snd_seq, 0,
dev, netdev) < 0)
goto out_free;
dev_put(netdev);
cfg80211_put_dev(dev);
return genlmsg_unicast(msg, info->snd_pid);
out_free:
nlmsg_free(msg);
out_err:
dev_put(netdev);
cfg80211_put_dev(dev);
return -ENOBUFS;
}
static const struct nla_policy mntr_flags_policy[NL80211_MNTR_FLAG_MAX + 1] = {
[NL80211_MNTR_FLAG_FCSFAIL] = { .type = NLA_FLAG },
[NL80211_MNTR_FLAG_PLCPFAIL] = { .type = NLA_FLAG },
[NL80211_MNTR_FLAG_CONTROL] = { .type = NLA_FLAG },
[NL80211_MNTR_FLAG_OTHER_BSS] = { .type = NLA_FLAG },
[NL80211_MNTR_FLAG_COOK_FRAMES] = { .type = NLA_FLAG },
};
static int parse_monitor_flags(struct nlattr *nla, u32 *mntrflags)
{
struct nlattr *flags[NL80211_MNTR_FLAG_MAX + 1];
int flag;
*mntrflags = 0;
if (!nla)
return -EINVAL;
if (nla_parse_nested(flags, NL80211_MNTR_FLAG_MAX,
nla, mntr_flags_policy))
return -EINVAL;
for (flag = 1; flag <= NL80211_MNTR_FLAG_MAX; flag++)
if (flags[flag])
*mntrflags |= (1<<flag);
return 0;
}
static int nl80211_set_interface(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *drv;
struct vif_params params;
int err;
enum nl80211_iftype otype, ntype;
struct net_device *dev;
u32 _flags, *flags = NULL;
bool change = false;
memset(&params, 0, sizeof(params));
rtnl_lock();
err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
if (err)
goto unlock_rtnl;
otype = ntype = dev->ieee80211_ptr->iftype;
if (info->attrs[NL80211_ATTR_IFTYPE]) {
ntype = nla_get_u32(info->attrs[NL80211_ATTR_IFTYPE]);
if (otype != ntype)
change = true;
if (ntype > NL80211_IFTYPE_MAX) {
err = -EINVAL;
goto unlock;
}
}
if (!drv->ops->change_virtual_intf ||
!(drv->wiphy.interface_modes & (1 << ntype))) {
err = -EOPNOTSUPP;
goto unlock;
}
if (info->attrs[NL80211_ATTR_MESH_ID]) {
if (ntype != NL80211_IFTYPE_MESH_POINT) {
err = -EINVAL;
goto unlock;
}
params.mesh_id = nla_data(info->attrs[NL80211_ATTR_MESH_ID]);
params.mesh_id_len = nla_len(info->attrs[NL80211_ATTR_MESH_ID]);
change = true;
}
if (info->attrs[NL80211_ATTR_MNTR_FLAGS]) {
if (ntype != NL80211_IFTYPE_MONITOR) {
err = -EINVAL;
goto unlock;
}
err = parse_monitor_flags(info->attrs[NL80211_ATTR_MNTR_FLAGS],
&_flags);
if (err)
goto unlock;
flags = &_flags;
change = true;
}
if (change)
err = drv->ops->change_virtual_intf(&drv->wiphy, dev,
ntype, flags, &params);
else
err = 0;
WARN_ON(!err && dev->ieee80211_ptr->iftype != ntype);
if (!err && (ntype != otype)) {
if (otype == NL80211_IFTYPE_ADHOC)
cfg80211_clear_ibss(dev, false);
}
unlock:
dev_put(dev);
cfg80211_put_dev(drv);
unlock_rtnl:
rtnl_unlock();
return err;
}
static int nl80211_new_interface(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *drv;
struct vif_params params;
int err;
enum nl80211_iftype type = NL80211_IFTYPE_UNSPECIFIED;
u32 flags;
memset(&params, 0, sizeof(params));
if (!info->attrs[NL80211_ATTR_IFNAME])
return -EINVAL;
if (info->attrs[NL80211_ATTR_IFTYPE]) {
type = nla_get_u32(info->attrs[NL80211_ATTR_IFTYPE]);
if (type > NL80211_IFTYPE_MAX)
return -EINVAL;
}
rtnl_lock();
drv = cfg80211_get_dev_from_info(info);
if (IS_ERR(drv)) {
err = PTR_ERR(drv);
goto unlock_rtnl;
}
if (!drv->ops->add_virtual_intf ||
!(drv->wiphy.interface_modes & (1 << type))) {
err = -EOPNOTSUPP;
goto unlock;
}
if (type == NL80211_IFTYPE_MESH_POINT &&
info->attrs[NL80211_ATTR_MESH_ID]) {
params.mesh_id = nla_data(info->attrs[NL80211_ATTR_MESH_ID]);
params.mesh_id_len = nla_len(info->attrs[NL80211_ATTR_MESH_ID]);
}
err = parse_monitor_flags(type == NL80211_IFTYPE_MONITOR ?
info->attrs[NL80211_ATTR_MNTR_FLAGS] : NULL,
&flags);
err = drv->ops->add_virtual_intf(&drv->wiphy,
nla_data(info->attrs[NL80211_ATTR_IFNAME]),
type, err ? NULL : &flags, &params);
unlock:
cfg80211_put_dev(drv);
unlock_rtnl:
rtnl_unlock();
return err;
}
static int nl80211_del_interface(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *drv;
int ifindex, err;
struct net_device *dev;
rtnl_lock();
err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
if (err)
goto unlock_rtnl;
ifindex = dev->ifindex;
dev_put(dev);
if (!drv->ops->del_virtual_intf) {
err = -EOPNOTSUPP;
goto out;
}
err = drv->ops->del_virtual_intf(&drv->wiphy, ifindex);
out:
cfg80211_put_dev(drv);
unlock_rtnl:
rtnl_unlock();
return err;
}
struct get_key_cookie {
struct sk_buff *msg;
int error;
};
static void get_key_callback(void *c, struct key_params *params)
{
struct get_key_cookie *cookie = c;
if (params->key)
NLA_PUT(cookie->msg, NL80211_ATTR_KEY_DATA,
params->key_len, params->key);
if (params->seq)
NLA_PUT(cookie->msg, NL80211_ATTR_KEY_SEQ,
params->seq_len, params->seq);
if (params->cipher)
NLA_PUT_U32(cookie->msg, NL80211_ATTR_KEY_CIPHER,
params->cipher);
return;
nla_put_failure:
cookie->error = 1;
}
static int nl80211_get_key(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *drv;
int err;
struct net_device *dev;
u8 key_idx = 0;
u8 *mac_addr = NULL;
struct get_key_cookie cookie = {
.error = 0,
};
void *hdr;
struct sk_buff *msg;
if (info->attrs[NL80211_ATTR_KEY_IDX])
key_idx = nla_get_u8(info->attrs[NL80211_ATTR_KEY_IDX]);
if (key_idx > 5)
return -EINVAL;
if (info->attrs[NL80211_ATTR_MAC])
mac_addr = nla_data(info->attrs[NL80211_ATTR_MAC]);
rtnl_lock();
err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
if (err)
goto unlock_rtnl;
if (!drv->ops->get_key) {
err = -EOPNOTSUPP;
goto out;
}
msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
if (!msg) {
err = -ENOMEM;
goto out;
}
hdr = nl80211hdr_put(msg, info->snd_pid, info->snd_seq, 0,
NL80211_CMD_NEW_KEY);
if (IS_ERR(hdr)) {
err = PTR_ERR(hdr);
goto out;
}
cookie.msg = msg;
NLA_PUT_U32(msg, NL80211_ATTR_IFINDEX, dev->ifindex);
NLA_PUT_U8(msg, NL80211_ATTR_KEY_IDX, key_idx);
if (mac_addr)
NLA_PUT(msg, NL80211_ATTR_MAC, ETH_ALEN, mac_addr);
err = drv->ops->get_key(&drv->wiphy, dev, key_idx, mac_addr,
&cookie, get_key_callback);
if (err)
goto out;
if (cookie.error)
goto nla_put_failure;
genlmsg_end(msg, hdr);
err = genlmsg_unicast(msg, info->snd_pid);
goto out;
nla_put_failure:
err = -ENOBUFS;
nlmsg_free(msg);
out:
cfg80211_put_dev(drv);
dev_put(dev);
unlock_rtnl:
rtnl_unlock();
return err;
}
static int nl80211_set_key(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *drv;
int err;
struct net_device *dev;
u8 key_idx;
int (*func)(struct wiphy *wiphy, struct net_device *netdev,
u8 key_index);
if (!info->attrs[NL80211_ATTR_KEY_IDX])
return -EINVAL;
key_idx = nla_get_u8(info->attrs[NL80211_ATTR_KEY_IDX]);
if (info->attrs[NL80211_ATTR_KEY_DEFAULT_MGMT]) {
if (key_idx < 4 || key_idx > 5)
return -EINVAL;
} else if (key_idx > 3)
return -EINVAL;
/* currently only support setting default key */
if (!info->attrs[NL80211_ATTR_KEY_DEFAULT] &&
!info->attrs[NL80211_ATTR_KEY_DEFAULT_MGMT])
return -EINVAL;
rtnl_lock();
err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
if (err)
goto unlock_rtnl;
if (info->attrs[NL80211_ATTR_KEY_DEFAULT])
func = drv->ops->set_default_key;
else
func = drv->ops->set_default_mgmt_key;
if (!func) {
err = -EOPNOTSUPP;
goto out;
}
err = func(&drv->wiphy, dev, key_idx);
#ifdef CONFIG_WIRELESS_EXT
if (!err) {
if (func == drv->ops->set_default_key)
dev->ieee80211_ptr->wext.default_key = key_idx;
else
dev->ieee80211_ptr->wext.default_mgmt_key = key_idx;
}
#endif
out:
cfg80211_put_dev(drv);
dev_put(dev);
unlock_rtnl:
rtnl_unlock();
return err;
}
static int nl80211_new_key(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *drv;
int err, i;
struct net_device *dev;
struct key_params params;
u8 key_idx = 0;
u8 *mac_addr = NULL;
memset(&params, 0, sizeof(params));
if (!info->attrs[NL80211_ATTR_KEY_CIPHER])
return -EINVAL;
if (info->attrs[NL80211_ATTR_KEY_DATA]) {
params.key = nla_data(info->attrs[NL80211_ATTR_KEY_DATA]);
params.key_len = nla_len(info->attrs[NL80211_ATTR_KEY_DATA]);
}
if (info->attrs[NL80211_ATTR_KEY_SEQ]) {
params.seq = nla_data(info->attrs[NL80211_ATTR_KEY_SEQ]);
params.seq_len = nla_len(info->attrs[NL80211_ATTR_KEY_SEQ]);
}
if (info->attrs[NL80211_ATTR_KEY_IDX])
key_idx = nla_get_u8(info->attrs[NL80211_ATTR_KEY_IDX]);
params.cipher = nla_get_u32(info->attrs[NL80211_ATTR_KEY_CIPHER]);
if (info->attrs[NL80211_ATTR_MAC])
mac_addr = nla_data(info->attrs[NL80211_ATTR_MAC]);
if (cfg80211_validate_key_settings(&params, key_idx, mac_addr))
return -EINVAL;
rtnl_lock();
err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
if (err)
goto unlock_rtnl;
for (i = 0; i < drv->wiphy.n_cipher_suites; i++)
if (params.cipher == drv->wiphy.cipher_suites[i])
break;
if (i == drv->wiphy.n_cipher_suites) {
err = -EINVAL;
goto out;
}
if (!drv->ops->add_key) {
err = -EOPNOTSUPP;
goto out;
}
err = drv->ops->add_key(&drv->wiphy, dev, key_idx, mac_addr, &params);
out:
cfg80211_put_dev(drv);
dev_put(dev);
unlock_rtnl:
rtnl_unlock();
return err;
}
static int nl80211_del_key(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *drv;
int err;
struct net_device *dev;
u8 key_idx = 0;
u8 *mac_addr = NULL;
if (info->attrs[NL80211_ATTR_KEY_IDX])
key_idx = nla_get_u8(info->attrs[NL80211_ATTR_KEY_IDX]);
if (key_idx > 5)
return -EINVAL;
if (info->attrs[NL80211_ATTR_MAC])
mac_addr = nla_data(info->attrs[NL80211_ATTR_MAC]);
rtnl_lock();
err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
if (err)
goto unlock_rtnl;
if (!drv->ops->del_key) {
err = -EOPNOTSUPP;
goto out;
}
err = drv->ops->del_key(&drv->wiphy, dev, key_idx, mac_addr);
#ifdef CONFIG_WIRELESS_EXT
if (!err) {
if (key_idx == dev->ieee80211_ptr->wext.default_key)
dev->ieee80211_ptr->wext.default_key = -1;
else if (key_idx == dev->ieee80211_ptr->wext.default_mgmt_key)
dev->ieee80211_ptr->wext.default_mgmt_key = -1;
}
#endif
out:
cfg80211_put_dev(drv);
dev_put(dev);
unlock_rtnl:
rtnl_unlock();
return err;
}
static int nl80211_addset_beacon(struct sk_buff *skb, struct genl_info *info)
{
int (*call)(struct wiphy *wiphy, struct net_device *dev,
struct beacon_parameters *info);
struct cfg80211_registered_device *drv;
int err;
struct net_device *dev;
struct beacon_parameters params;
int haveinfo = 0;
if (!is_valid_ie_attr(info->attrs[NL80211_ATTR_BEACON_TAIL]))
return -EINVAL;
rtnl_lock();
err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
if (err)
goto unlock_rtnl;
if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP) {
err = -EOPNOTSUPP;
goto out;
}
switch (info->genlhdr->cmd) {
case NL80211_CMD_NEW_BEACON:
/* these are required for NEW_BEACON */
if (!info->attrs[NL80211_ATTR_BEACON_INTERVAL] ||
!info->attrs[NL80211_ATTR_DTIM_PERIOD] ||
!info->attrs[NL80211_ATTR_BEACON_HEAD]) {
err = -EINVAL;
goto out;
}
call = drv->ops->add_beacon;
break;
case NL80211_CMD_SET_BEACON:
call = drv->ops->set_beacon;
break;
default:
WARN_ON(1);
err = -EOPNOTSUPP;
goto out;
}
if (!call) {
err = -EOPNOTSUPP;
goto out;
}
memset(&params, 0, sizeof(params));
if (info->attrs[NL80211_ATTR_BEACON_INTERVAL]) {
params.interval =
nla_get_u32(info->attrs[NL80211_ATTR_BEACON_INTERVAL]);
haveinfo = 1;
}
if (info->attrs[NL80211_ATTR_DTIM_PERIOD]) {
params.dtim_period =
nla_get_u32(info->attrs[NL80211_ATTR_DTIM_PERIOD]);
haveinfo = 1;
}
if (info->attrs[NL80211_ATTR_BEACON_HEAD]) {
params.head = nla_data(info->attrs[NL80211_ATTR_BEACON_HEAD]);
params.head_len =
nla_len(info->attrs[NL80211_ATTR_BEACON_HEAD]);
haveinfo = 1;
}
if (info->attrs[NL80211_ATTR_BEACON_TAIL]) {
params.tail = nla_data(info->attrs[NL80211_ATTR_BEACON_TAIL]);
params.tail_len =
nla_len(info->attrs[NL80211_ATTR_BEACON_TAIL]);
haveinfo = 1;
}
if (!haveinfo) {
err = -EINVAL;
goto out;
}
err = call(&drv->wiphy, dev, &params);
out:
cfg80211_put_dev(drv);
dev_put(dev);
unlock_rtnl:
rtnl_unlock();
return err;
}
static int nl80211_del_beacon(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *drv;
int err;
struct net_device *dev;
rtnl_lock();
err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
if (err)
goto unlock_rtnl;
if (!drv->ops->del_beacon) {
err = -EOPNOTSUPP;
goto out;
}
if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP) {
err = -EOPNOTSUPP;
goto out;
}
err = drv->ops->del_beacon(&drv->wiphy, dev);
out:
cfg80211_put_dev(drv);
dev_put(dev);
unlock_rtnl:
rtnl_unlock();
return err;
}
static const struct nla_policy sta_flags_policy[NL80211_STA_FLAG_MAX + 1] = {
[NL80211_STA_FLAG_AUTHORIZED] = { .type = NLA_FLAG },
[NL80211_STA_FLAG_SHORT_PREAMBLE] = { .type = NLA_FLAG },
[NL80211_STA_FLAG_WME] = { .type = NLA_FLAG },
[NL80211_STA_FLAG_MFP] = { .type = NLA_FLAG },
};
static int parse_station_flags(struct genl_info *info,
struct station_parameters *params)
{
struct nlattr *flags[NL80211_STA_FLAG_MAX + 1];
struct nlattr *nla;
int flag;
/*
* Try parsing the new attribute first so userspace
* can specify both for older kernels.
*/
nla = info->attrs[NL80211_ATTR_STA_FLAGS2];
if (nla) {
struct nl80211_sta_flag_update *sta_flags;
sta_flags = nla_data(nla);
params->sta_flags_mask = sta_flags->mask;
params->sta_flags_set = sta_flags->set;
if ((params->sta_flags_mask |
params->sta_flags_set) & BIT(__NL80211_STA_FLAG_INVALID))
return -EINVAL;
return 0;
}
/* if present, parse the old attribute */
nla = info->attrs[NL80211_ATTR_STA_FLAGS];
if (!nla)
return 0;
if (nla_parse_nested(flags, NL80211_STA_FLAG_MAX,
nla, sta_flags_policy))
return -EINVAL;
params->sta_flags_mask = (1 << __NL80211_STA_FLAG_AFTER_LAST) - 1;
params->sta_flags_mask &= ~1;
for (flag = 1; flag <= NL80211_STA_FLAG_MAX; flag++)
if (flags[flag])
params->sta_flags_set |= (1<<flag);
return 0;
}
static u16 nl80211_calculate_bitrate(struct rate_info *rate)
{
int modulation, streams, bitrate;
if (!(rate->flags & RATE_INFO_FLAGS_MCS))
return rate->legacy;
/* the formula below does only work for MCS values smaller than 32 */
if (rate->mcs >= 32)
return 0;
modulation = rate->mcs & 7;
streams = (rate->mcs >> 3) + 1;
bitrate = (rate->flags & RATE_INFO_FLAGS_40_MHZ_WIDTH) ?
13500000 : 6500000;
if (modulation < 4)
bitrate *= (modulation + 1);
else if (modulation == 4)
bitrate *= (modulation + 2);
else
bitrate *= (modulation + 3);
bitrate *= streams;
if (rate->flags & RATE_INFO_FLAGS_SHORT_GI)
bitrate = (bitrate / 9) * 10;
/* do NOT round down here */
return (bitrate + 50000) / 100000;
}
static int nl80211_send_station(struct sk_buff *msg, u32 pid, u32 seq,
int flags, struct net_device *dev,
u8 *mac_addr, struct station_info *sinfo)
{
void *hdr;
struct nlattr *sinfoattr, *txrate;
u16 bitrate;
hdr = nl80211hdr_put(msg, pid, seq, flags, NL80211_CMD_NEW_STATION);
if (!hdr)
return -1;
NLA_PUT_U32(msg, NL80211_ATTR_IFINDEX, dev->ifindex);
NLA_PUT(msg, NL80211_ATTR_MAC, ETH_ALEN, mac_addr);
sinfoattr = nla_nest_start(msg, NL80211_ATTR_STA_INFO);
if (!sinfoattr)
goto nla_put_failure;
if (sinfo->filled & STATION_INFO_INACTIVE_TIME)
NLA_PUT_U32(msg, NL80211_STA_INFO_INACTIVE_TIME,
sinfo->inactive_time);
if (sinfo->filled & STATION_INFO_RX_BYTES)
NLA_PUT_U32(msg, NL80211_STA_INFO_RX_BYTES,
sinfo->rx_bytes);
if (sinfo->filled & STATION_INFO_TX_BYTES)
NLA_PUT_U32(msg, NL80211_STA_INFO_TX_BYTES,
sinfo->tx_bytes);
if (sinfo->filled & STATION_INFO_LLID)
NLA_PUT_U16(msg, NL80211_STA_INFO_LLID,
sinfo->llid);
if (sinfo->filled & STATION_INFO_PLID)
NLA_PUT_U16(msg, NL80211_STA_INFO_PLID,
sinfo->plid);
if (sinfo->filled & STATION_INFO_PLINK_STATE)
NLA_PUT_U8(msg, NL80211_STA_INFO_PLINK_STATE,
sinfo->plink_state);
if (sinfo->filled & STATION_INFO_SIGNAL)
NLA_PUT_U8(msg, NL80211_STA_INFO_SIGNAL,
sinfo->signal);
if (sinfo->filled & STATION_INFO_TX_BITRATE) {
txrate = nla_nest_start(msg, NL80211_STA_INFO_TX_BITRATE);
if (!txrate)
goto nla_put_failure;
/* nl80211_calculate_bitrate will return 0 for mcs >= 32 */
bitrate = nl80211_calculate_bitrate(&sinfo->txrate);
if (bitrate > 0)
NLA_PUT_U16(msg, NL80211_RATE_INFO_BITRATE, bitrate);
if (sinfo->txrate.flags & RATE_INFO_FLAGS_MCS)
NLA_PUT_U8(msg, NL80211_RATE_INFO_MCS,
sinfo->txrate.mcs);
if (sinfo->txrate.flags & RATE_INFO_FLAGS_40_MHZ_WIDTH)
NLA_PUT_FLAG(msg, NL80211_RATE_INFO_40_MHZ_WIDTH);
if (sinfo->txrate.flags & RATE_INFO_FLAGS_SHORT_GI)
NLA_PUT_FLAG(msg, NL80211_RATE_INFO_SHORT_GI);
nla_nest_end(msg, txrate);
}
if (sinfo->filled & STATION_INFO_RX_PACKETS)
NLA_PUT_U32(msg, NL80211_STA_INFO_RX_PACKETS,
sinfo->rx_packets);
if (sinfo->filled & STATION_INFO_TX_PACKETS)
NLA_PUT_U32(msg, NL80211_STA_INFO_TX_PACKETS,
sinfo->tx_packets);
nla_nest_end(msg, sinfoattr);
return genlmsg_end(msg, hdr);
nla_put_failure:
genlmsg_cancel(msg, hdr);
return -EMSGSIZE;
}
static int nl80211_dump_station(struct sk_buff *skb,
struct netlink_callback *cb)
{
struct station_info sinfo;
struct cfg80211_registered_device *dev;
struct net_device *netdev;
u8 mac_addr[ETH_ALEN];
int ifidx = cb->args[0];
int sta_idx = cb->args[1];
int err;
if (!ifidx) {
err = nlmsg_parse(cb->nlh, GENL_HDRLEN + nl80211_fam.hdrsize,
nl80211_fam.attrbuf, nl80211_fam.maxattr,
nl80211_policy);
if (err)
return err;
if (!nl80211_fam.attrbuf[NL80211_ATTR_IFINDEX])
return -EINVAL;
ifidx = nla_get_u32(nl80211_fam.attrbuf[NL80211_ATTR_IFINDEX]);
if (!ifidx)
return -EINVAL;
}
rtnl_lock();
netdev = __dev_get_by_index(&init_net, ifidx);
if (!netdev) {
err = -ENODEV;
goto out_rtnl;
}
dev = cfg80211_get_dev_from_ifindex(ifidx);
if (IS_ERR(dev)) {
err = PTR_ERR(dev);
goto out_rtnl;
}
if (!dev->ops->dump_station) {
err = -EOPNOTSUPP;
goto out_err;
}
while (1) {
err = dev->ops->dump_station(&dev->wiphy, netdev, sta_idx,
mac_addr, &sinfo);
if (err == -ENOENT)
break;
if (err)
goto out_err;
if (nl80211_send_station(skb,
NETLINK_CB(cb->skb).pid,
cb->nlh->nlmsg_seq, NLM_F_MULTI,
netdev, mac_addr,
&sinfo) < 0)
goto out;
sta_idx++;
}
out:
cb->args[1] = sta_idx;
err = skb->len;
out_err:
cfg80211_put_dev(dev);
out_rtnl:
rtnl_unlock();
return err;
}
static int nl80211_get_station(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *drv;
int err;
struct net_device *dev;
struct station_info sinfo;
struct sk_buff *msg;
u8 *mac_addr = NULL;
memset(&sinfo, 0, sizeof(sinfo));
if (!info->attrs[NL80211_ATTR_MAC])
return -EINVAL;
mac_addr = nla_data(info->attrs[NL80211_ATTR_MAC]);
rtnl_lock();
err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
if (err)
goto out_rtnl;
if (!drv->ops->get_station) {
err = -EOPNOTSUPP;
goto out;
}
err = drv->ops->get_station(&drv->wiphy, dev, mac_addr, &sinfo);
if (err)
goto out;
msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
if (!msg)
goto out;
if (nl80211_send_station(msg, info->snd_pid, info->snd_seq, 0,
dev, mac_addr, &sinfo) < 0)
goto out_free;
err = genlmsg_unicast(msg, info->snd_pid);
goto out;
out_free:
nlmsg_free(msg);
out:
cfg80211_put_dev(drv);
dev_put(dev);
out_rtnl:
rtnl_unlock();
return err;
}
/*
* Get vlan interface making sure it is on the right wiphy.
*/
static int get_vlan(struct nlattr *vlanattr,
struct cfg80211_registered_device *rdev,
struct net_device **vlan)
{
*vlan = NULL;
if (vlanattr) {
*vlan = dev_get_by_index(&init_net, nla_get_u32(vlanattr));
if (!*vlan)
return -ENODEV;
if (!(*vlan)->ieee80211_ptr)
return -EINVAL;
if ((*vlan)->ieee80211_ptr->wiphy != &rdev->wiphy)
return -EINVAL;
}
return 0;
}
static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *drv;
int err;
struct net_device *dev;
struct station_parameters params;
u8 *mac_addr = NULL;
memset(&params, 0, sizeof(params));
params.listen_interval = -1;
if (info->attrs[NL80211_ATTR_STA_AID])
return -EINVAL;
if (!info->attrs[NL80211_ATTR_MAC])
return -EINVAL;
mac_addr = nla_data(info->attrs[NL80211_ATTR_MAC]);
if (info->attrs[NL80211_ATTR_STA_SUPPORTED_RATES]) {
params.supported_rates =
nla_data(info->attrs[NL80211_ATTR_STA_SUPPORTED_RATES]);
params.supported_rates_len =
nla_len(info->attrs[NL80211_ATTR_STA_SUPPORTED_RATES]);
}
if (info->attrs[NL80211_ATTR_STA_LISTEN_INTERVAL])
params.listen_interval =
nla_get_u16(info->attrs[NL80211_ATTR_STA_LISTEN_INTERVAL]);
if (info->attrs[NL80211_ATTR_HT_CAPABILITY])
params.ht_capa =
nla_data(info->attrs[NL80211_ATTR_HT_CAPABILITY]);
if (parse_station_flags(info, &params))
return -EINVAL;
if (info->attrs[NL80211_ATTR_STA_PLINK_ACTION])
params.plink_action =
nla_get_u8(info->attrs[NL80211_ATTR_STA_PLINK_ACTION]);
rtnl_lock();
err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
if (err)
goto out_rtnl;
err = get_vlan(info->attrs[NL80211_ATTR_STA_VLAN], drv, &params.vlan);
if (err)
goto out;
/* validate settings */
err = 0;
switch (dev->ieee80211_ptr->iftype) {
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_AP_VLAN:
/* disallow mesh-specific things */
if (params.plink_action)
err = -EINVAL;
break;
case NL80211_IFTYPE_STATION:
/* disallow everything but AUTHORIZED flag */
if (params.plink_action)
err = -EINVAL;
if (params.vlan)
err = -EINVAL;
if (params.supported_rates)
err = -EINVAL;
if (params.ht_capa)
err = -EINVAL;
if (params.listen_interval >= 0)
err = -EINVAL;
if (params.sta_flags_mask & ~BIT(NL80211_STA_FLAG_AUTHORIZED))
err = -EINVAL;
break;
case NL80211_IFTYPE_MESH_POINT:
/* disallow things mesh doesn't support */
if (params.vlan)
err = -EINVAL;
if (params.ht_capa)
err = -EINVAL;
if (params.listen_interval >= 0)
err = -EINVAL;
if (params.supported_rates)
err = -EINVAL;
if (params.sta_flags_mask)
err = -EINVAL;
break;
default:
err = -EINVAL;
}
if (err)
goto out;
if (!drv->ops->change_station) {
err = -EOPNOTSUPP;
goto out;
}
err = drv->ops->change_station(&drv->wiphy, dev, mac_addr, &params);
out:
if (params.vlan)
dev_put(params.vlan);
cfg80211_put_dev(drv);
dev_put(dev);
out_rtnl:
rtnl_unlock();
return err;
}
static int nl80211_new_station(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *drv;
int err;
struct net_device *dev;
struct station_parameters params;
u8 *mac_addr = NULL;
memset(&params, 0, sizeof(params));
if (!info->attrs[NL80211_ATTR_MAC])
return -EINVAL;
if (!info->attrs[NL80211_ATTR_STA_LISTEN_INTERVAL])
return -EINVAL;
if (!info->attrs[NL80211_ATTR_STA_SUPPORTED_RATES])
return -EINVAL;
mac_addr = nla_data(info->attrs[NL80211_ATTR_MAC]);
params.supported_rates =
nla_data(info->attrs[NL80211_ATTR_STA_SUPPORTED_RATES]);
params.supported_rates_len =
nla_len(info->attrs[NL80211_ATTR_STA_SUPPORTED_RATES]);
params.listen_interval =
nla_get_u16(info->attrs[NL80211_ATTR_STA_LISTEN_INTERVAL]);
if (info->attrs[NL80211_ATTR_STA_AID]) {
params.aid = nla_get_u16(info->attrs[NL80211_ATTR_STA_AID]);
if (!params.aid || params.aid > IEEE80211_MAX_AID)
return -EINVAL;
}
if (info->attrs[NL80211_ATTR_HT_CAPABILITY])
params.ht_capa =
nla_data(info->attrs[NL80211_ATTR_HT_CAPABILITY]);
if (parse_station_flags(info, &params))
return -EINVAL;
rtnl_lock();
err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
if (err)
goto out_rtnl;
err = get_vlan(info->attrs[NL80211_ATTR_STA_VLAN], drv, &params.vlan);
if (err)
goto out;
/* validate settings */
err = 0;
switch (dev->ieee80211_ptr->iftype) {
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_AP_VLAN:
/* all ok but must have AID */
if (!params.aid)
err = -EINVAL;
break;
case NL80211_IFTYPE_MESH_POINT:
/* disallow things mesh doesn't support */
if (params.vlan)
err = -EINVAL;
if (params.aid)
err = -EINVAL;
if (params.ht_capa)
err = -EINVAL;
if (params.listen_interval >= 0)
err = -EINVAL;
if (params.supported_rates)
err = -EINVAL;
if (params.sta_flags_mask)
err = -EINVAL;
break;
default:
err = -EINVAL;
}
if (err)
goto out;
if (!drv->ops->add_station) {
err = -EOPNOTSUPP;
goto out;
}
if (!netif_running(dev)) {
err = -ENETDOWN;
goto out;
}
err = drv->ops->add_station(&drv->wiphy, dev, mac_addr, &params);
out:
if (params.vlan)
dev_put(params.vlan);
cfg80211_put_dev(drv);
dev_put(dev);
out_rtnl:
rtnl_unlock();
return err;
}
static int nl80211_del_station(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *drv;
int err;
struct net_device *dev;
u8 *mac_addr = NULL;
if (info->attrs[NL80211_ATTR_MAC])
mac_addr = nla_data(info->attrs[NL80211_ATTR_MAC]);
rtnl_lock();
err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
if (err)
goto out_rtnl;
if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP &&
dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP_VLAN &&
dev->ieee80211_ptr->iftype != NL80211_IFTYPE_MESH_POINT) {
err = -EINVAL;
goto out;
}
if (!drv->ops->del_station) {
err = -EOPNOTSUPP;
goto out;
}
err = drv->ops->del_station(&drv->wiphy, dev, mac_addr);
out:
cfg80211_put_dev(drv);
dev_put(dev);
out_rtnl:
rtnl_unlock();
return err;
}
static int nl80211_send_mpath(struct sk_buff *msg, u32 pid, u32 seq,
int flags, struct net_device *dev,
u8 *dst, u8 *next_hop,
struct mpath_info *pinfo)
{
void *hdr;
struct nlattr *pinfoattr;
hdr = nl80211hdr_put(msg, pid, seq, flags, NL80211_CMD_NEW_STATION);
if (!hdr)
return -1;
NLA_PUT_U32(msg, NL80211_ATTR_IFINDEX, dev->ifindex);
NLA_PUT(msg, NL80211_ATTR_MAC, ETH_ALEN, dst);
NLA_PUT(msg, NL80211_ATTR_MPATH_NEXT_HOP, ETH_ALEN, next_hop);
pinfoattr = nla_nest_start(msg, NL80211_ATTR_MPATH_INFO);
if (!pinfoattr)
goto nla_put_failure;
if (pinfo->filled & MPATH_INFO_FRAME_QLEN)
NLA_PUT_U32(msg, NL80211_MPATH_INFO_FRAME_QLEN,
pinfo->frame_qlen);
if (pinfo->filled & MPATH_INFO_DSN)
NLA_PUT_U32(msg, NL80211_MPATH_INFO_DSN,
pinfo->dsn);
if (pinfo->filled & MPATH_INFO_METRIC)
NLA_PUT_U32(msg, NL80211_MPATH_INFO_METRIC,
pinfo->metric);
if (pinfo->filled & MPATH_INFO_EXPTIME)
NLA_PUT_U32(msg, NL80211_MPATH_INFO_EXPTIME,
pinfo->exptime);
if (pinfo->filled & MPATH_INFO_FLAGS)
NLA_PUT_U8(msg, NL80211_MPATH_INFO_FLAGS,
pinfo->flags);
if (pinfo->filled & MPATH_INFO_DISCOVERY_TIMEOUT)
NLA_PUT_U32(msg, NL80211_MPATH_INFO_DISCOVERY_TIMEOUT,
pinfo->discovery_timeout);
if (pinfo->filled & MPATH_INFO_DISCOVERY_RETRIES)
NLA_PUT_U8(msg, NL80211_MPATH_INFO_DISCOVERY_RETRIES,
pinfo->discovery_retries);
nla_nest_end(msg, pinfoattr);
return genlmsg_end(msg, hdr);
nla_put_failure:
genlmsg_cancel(msg, hdr);
return -EMSGSIZE;
}
static int nl80211_dump_mpath(struct sk_buff *skb,
struct netlink_callback *cb)
{
struct mpath_info pinfo;
struct cfg80211_registered_device *dev;
struct net_device *netdev;
u8 dst[ETH_ALEN];
u8 next_hop[ETH_ALEN];
int ifidx = cb->args[0];
int path_idx = cb->args[1];
int err;
if (!ifidx) {
err = nlmsg_parse(cb->nlh, GENL_HDRLEN + nl80211_fam.hdrsize,
nl80211_fam.attrbuf, nl80211_fam.maxattr,
nl80211_policy);
if (err)
return err;
if (!nl80211_fam.attrbuf[NL80211_ATTR_IFINDEX])
return -EINVAL;
ifidx = nla_get_u32(nl80211_fam.attrbuf[NL80211_ATTR_IFINDEX]);
if (!ifidx)
return -EINVAL;
}
rtnl_lock();
netdev = __dev_get_by_index(&init_net, ifidx);
if (!netdev) {
err = -ENODEV;
goto out_rtnl;
}
dev = cfg80211_get_dev_from_ifindex(ifidx);
if (IS_ERR(dev)) {
err = PTR_ERR(dev);
goto out_rtnl;
}
if (!dev->ops->dump_mpath) {
err = -EOPNOTSUPP;
goto out_err;
}
if (netdev->ieee80211_ptr->iftype != NL80211_IFTYPE_MESH_POINT) {
err = -EOPNOTSUPP;
goto out;
}
while (1) {
err = dev->ops->dump_mpath(&dev->wiphy, netdev, path_idx,
dst, next_hop, &pinfo);
if (err == -ENOENT)
break;
if (err)
goto out_err;
if (nl80211_send_mpath(skb, NETLINK_CB(cb->skb).pid,
cb->nlh->nlmsg_seq, NLM_F_MULTI,
netdev, dst, next_hop,
&pinfo) < 0)
goto out;
path_idx++;
}
out:
cb->args[1] = path_idx;
err = skb->len;
out_err:
cfg80211_put_dev(dev);
out_rtnl:
rtnl_unlock();
return err;
}
static int nl80211_get_mpath(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *drv;
int err;
struct net_device *dev;
struct mpath_info pinfo;
struct sk_buff *msg;
u8 *dst = NULL;
u8 next_hop[ETH_ALEN];
memset(&pinfo, 0, sizeof(pinfo));
if (!info->attrs[NL80211_ATTR_MAC])
return -EINVAL;
dst = nla_data(info->attrs[NL80211_ATTR_MAC]);
rtnl_lock();
err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
if (err)
goto out_rtnl;
if (!drv->ops->get_mpath) {
err = -EOPNOTSUPP;
goto out;
}
if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_MESH_POINT) {
err = -EOPNOTSUPP;
goto out;
}
err = drv->ops->get_mpath(&drv->wiphy, dev, dst, next_hop, &pinfo);
if (err)
goto out;
msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
if (!msg)
goto out;
if (nl80211_send_mpath(msg, info->snd_pid, info->snd_seq, 0,
dev, dst, next_hop, &pinfo) < 0)
goto out_free;
err = genlmsg_unicast(msg, info->snd_pid);
goto out;
out_free:
nlmsg_free(msg);
out:
cfg80211_put_dev(drv);
dev_put(dev);
out_rtnl:
rtnl_unlock();
return err;
}
static int nl80211_set_mpath(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *drv;
int err;
struct net_device *dev;
u8 *dst = NULL;
u8 *next_hop = NULL;
if (!info->attrs[NL80211_ATTR_MAC])
return -EINVAL;
if (!info->attrs[NL80211_ATTR_MPATH_NEXT_HOP])
return -EINVAL;
dst = nla_data(info->attrs[NL80211_ATTR_MAC]);
next_hop = nla_data(info->attrs[NL80211_ATTR_MPATH_NEXT_HOP]);
rtnl_lock();
err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
if (err)
goto out_rtnl;
if (!drv->ops->change_mpath) {
err = -EOPNOTSUPP;
goto out;
}
if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_MESH_POINT) {
err = -EOPNOTSUPP;
goto out;
}
if (!netif_running(dev)) {
err = -ENETDOWN;
goto out;
}
err = drv->ops->change_mpath(&drv->wiphy, dev, dst, next_hop);
out:
cfg80211_put_dev(drv);
dev_put(dev);
out_rtnl:
rtnl_unlock();
return err;
}
static int nl80211_new_mpath(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *drv;
int err;
struct net_device *dev;
u8 *dst = NULL;
u8 *next_hop = NULL;
if (!info->attrs[NL80211_ATTR_MAC])
return -EINVAL;
if (!info->attrs[NL80211_ATTR_MPATH_NEXT_HOP])
return -EINVAL;
dst = nla_data(info->attrs[NL80211_ATTR_MAC]);
next_hop = nla_data(info->attrs[NL80211_ATTR_MPATH_NEXT_HOP]);
rtnl_lock();
err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
if (err)
goto out_rtnl;
if (!drv->ops->add_mpath) {
err = -EOPNOTSUPP;
goto out;
}
if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_MESH_POINT) {
err = -EOPNOTSUPP;
goto out;
}
if (!netif_running(dev)) {
err = -ENETDOWN;
goto out;
}
err = drv->ops->add_mpath(&drv->wiphy, dev, dst, next_hop);
out:
cfg80211_put_dev(drv);
dev_put(dev);
out_rtnl:
rtnl_unlock();
return err;
}
static int nl80211_del_mpath(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *drv;
int err;
struct net_device *dev;
u8 *dst = NULL;
if (info->attrs[NL80211_ATTR_MAC])
dst = nla_data(info->attrs[NL80211_ATTR_MAC]);
rtnl_lock();
err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
if (err)
goto out_rtnl;
if (!drv->ops->del_mpath) {
err = -EOPNOTSUPP;
goto out;
}
err = drv->ops->del_mpath(&drv->wiphy, dev, dst);
out:
cfg80211_put_dev(drv);
dev_put(dev);
out_rtnl:
rtnl_unlock();
return err;
}
static int nl80211_set_bss(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *drv;
int err;
struct net_device *dev;
struct bss_parameters params;
memset(&params, 0, sizeof(params));
/* default to not changing parameters */
params.use_cts_prot = -1;
params.use_short_preamble = -1;
params.use_short_slot_time = -1;
if (info->attrs[NL80211_ATTR_BSS_CTS_PROT])
params.use_cts_prot =
nla_get_u8(info->attrs[NL80211_ATTR_BSS_CTS_PROT]);
if (info->attrs[NL80211_ATTR_BSS_SHORT_PREAMBLE])
params.use_short_preamble =
nla_get_u8(info->attrs[NL80211_ATTR_BSS_SHORT_PREAMBLE]);
if (info->attrs[NL80211_ATTR_BSS_SHORT_SLOT_TIME])
params.use_short_slot_time =
nla_get_u8(info->attrs[NL80211_ATTR_BSS_SHORT_SLOT_TIME]);
if (info->attrs[NL80211_ATTR_BSS_BASIC_RATES]) {
params.basic_rates =
nla_data(info->attrs[NL80211_ATTR_BSS_BASIC_RATES]);
params.basic_rates_len =
nla_len(info->attrs[NL80211_ATTR_BSS_BASIC_RATES]);
}
rtnl_lock();
err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
if (err)
goto out_rtnl;
if (!drv->ops->change_bss) {
err = -EOPNOTSUPP;
goto out;
}
if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP) {
err = -EOPNOTSUPP;
goto out;
}
err = drv->ops->change_bss(&drv->wiphy, dev, &params);
out:
cfg80211_put_dev(drv);
dev_put(dev);
out_rtnl:
rtnl_unlock();
return err;
}
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 06:19:48 +00:00
static const struct nla_policy
reg_rule_policy[NL80211_REG_RULE_ATTR_MAX + 1] = {
[NL80211_ATTR_REG_RULE_FLAGS] = { .type = NLA_U32 },
[NL80211_ATTR_FREQ_RANGE_START] = { .type = NLA_U32 },
[NL80211_ATTR_FREQ_RANGE_END] = { .type = NLA_U32 },
[NL80211_ATTR_FREQ_RANGE_MAX_BW] = { .type = NLA_U32 },
[NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN] = { .type = NLA_U32 },
[NL80211_ATTR_POWER_RULE_MAX_EIRP] = { .type = NLA_U32 },
};
static int parse_reg_rule(struct nlattr *tb[],
struct ieee80211_reg_rule *reg_rule)
{
struct ieee80211_freq_range *freq_range = &reg_rule->freq_range;
struct ieee80211_power_rule *power_rule = &reg_rule->power_rule;
if (!tb[NL80211_ATTR_REG_RULE_FLAGS])
return -EINVAL;
if (!tb[NL80211_ATTR_FREQ_RANGE_START])
return -EINVAL;
if (!tb[NL80211_ATTR_FREQ_RANGE_END])
return -EINVAL;
if (!tb[NL80211_ATTR_FREQ_RANGE_MAX_BW])
return -EINVAL;
if (!tb[NL80211_ATTR_POWER_RULE_MAX_EIRP])
return -EINVAL;
reg_rule->flags = nla_get_u32(tb[NL80211_ATTR_REG_RULE_FLAGS]);
freq_range->start_freq_khz =
nla_get_u32(tb[NL80211_ATTR_FREQ_RANGE_START]);
freq_range->end_freq_khz =
nla_get_u32(tb[NL80211_ATTR_FREQ_RANGE_END]);
freq_range->max_bandwidth_khz =
nla_get_u32(tb[NL80211_ATTR_FREQ_RANGE_MAX_BW]);
power_rule->max_eirp =
nla_get_u32(tb[NL80211_ATTR_POWER_RULE_MAX_EIRP]);
if (tb[NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN])
power_rule->max_antenna_gain =
nla_get_u32(tb[NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN]);
return 0;
}
static int nl80211_req_set_reg(struct sk_buff *skb, struct genl_info *info)
{
int r;
char *data = NULL;
/*
* You should only get this when cfg80211 hasn't yet initialized
* completely when built-in to the kernel right between the time
* window between nl80211_init() and regulatory_init(), if that is
* even possible.
*/
mutex_lock(&cfg80211_mutex);
if (unlikely(!cfg80211_regdomain)) {
mutex_unlock(&cfg80211_mutex);
return -EINPROGRESS;
}
mutex_unlock(&cfg80211_mutex);
if (!info->attrs[NL80211_ATTR_REG_ALPHA2])
return -EINVAL;
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 06:19:48 +00:00
data = nla_data(info->attrs[NL80211_ATTR_REG_ALPHA2]);
#ifdef CONFIG_WIRELESS_OLD_REGULATORY
/* We ignore world regdom requests with the old regdom setup */
if (is_world_regdom(data))
return -EINVAL;
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 06:19:48 +00:00
#endif
r = regulatory_hint_user(data);
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 06:19:48 +00:00
return r;
}
static int nl80211_get_mesh_params(struct sk_buff *skb,
struct genl_info *info)
{
struct cfg80211_registered_device *drv;
struct mesh_config cur_params;
int err;
struct net_device *dev;
void *hdr;
struct nlattr *pinfoattr;
struct sk_buff *msg;
rtnl_lock();
/* Look up our device */
err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
if (err)
goto out_rtnl;
if (!drv->ops->get_mesh_params) {
err = -EOPNOTSUPP;
goto out;
}
/* Get the mesh params */
err = drv->ops->get_mesh_params(&drv->wiphy, dev, &cur_params);
if (err)
goto out;
/* Draw up a netlink message to send back */
msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
if (!msg) {
err = -ENOBUFS;
goto out;
}
hdr = nl80211hdr_put(msg, info->snd_pid, info->snd_seq, 0,
NL80211_CMD_GET_MESH_PARAMS);
if (!hdr)
goto nla_put_failure;
pinfoattr = nla_nest_start(msg, NL80211_ATTR_MESH_PARAMS);
if (!pinfoattr)
goto nla_put_failure;
NLA_PUT_U32(msg, NL80211_ATTR_IFINDEX, dev->ifindex);
NLA_PUT_U16(msg, NL80211_MESHCONF_RETRY_TIMEOUT,
cur_params.dot11MeshRetryTimeout);
NLA_PUT_U16(msg, NL80211_MESHCONF_CONFIRM_TIMEOUT,
cur_params.dot11MeshConfirmTimeout);
NLA_PUT_U16(msg, NL80211_MESHCONF_HOLDING_TIMEOUT,
cur_params.dot11MeshHoldingTimeout);
NLA_PUT_U16(msg, NL80211_MESHCONF_MAX_PEER_LINKS,
cur_params.dot11MeshMaxPeerLinks);
NLA_PUT_U8(msg, NL80211_MESHCONF_MAX_RETRIES,
cur_params.dot11MeshMaxRetries);
NLA_PUT_U8(msg, NL80211_MESHCONF_TTL,
cur_params.dot11MeshTTL);
NLA_PUT_U8(msg, NL80211_MESHCONF_AUTO_OPEN_PLINKS,
cur_params.auto_open_plinks);
NLA_PUT_U8(msg, NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES,
cur_params.dot11MeshHWMPmaxPREQretries);
NLA_PUT_U32(msg, NL80211_MESHCONF_PATH_REFRESH_TIME,
cur_params.path_refresh_time);
NLA_PUT_U16(msg, NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT,
cur_params.min_discovery_timeout);
NLA_PUT_U32(msg, NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT,
cur_params.dot11MeshHWMPactivePathTimeout);
NLA_PUT_U16(msg, NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL,
cur_params.dot11MeshHWMPpreqMinInterval);
NLA_PUT_U16(msg, NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME,
cur_params.dot11MeshHWMPnetDiameterTraversalTime);
nla_nest_end(msg, pinfoattr);
genlmsg_end(msg, hdr);
err = genlmsg_unicast(msg, info->snd_pid);
goto out;
nla_put_failure:
genlmsg_cancel(msg, hdr);
err = -EMSGSIZE;
out:
/* Cleanup */
cfg80211_put_dev(drv);
dev_put(dev);
out_rtnl:
rtnl_unlock();
return err;
}
#define FILL_IN_MESH_PARAM_IF_SET(table, cfg, param, mask, attr_num, nla_fn) \
do {\
if (table[attr_num]) {\
cfg.param = nla_fn(table[attr_num]); \
mask |= (1 << (attr_num - 1)); \
} \
} while (0);\
static struct nla_policy
nl80211_meshconf_params_policy[NL80211_MESHCONF_ATTR_MAX+1] __read_mostly = {
[NL80211_MESHCONF_RETRY_TIMEOUT] = { .type = NLA_U16 },
[NL80211_MESHCONF_CONFIRM_TIMEOUT] = { .type = NLA_U16 },
[NL80211_MESHCONF_HOLDING_TIMEOUT] = { .type = NLA_U16 },
[NL80211_MESHCONF_MAX_PEER_LINKS] = { .type = NLA_U16 },
[NL80211_MESHCONF_MAX_RETRIES] = { .type = NLA_U8 },
[NL80211_MESHCONF_TTL] = { .type = NLA_U8 },
[NL80211_MESHCONF_AUTO_OPEN_PLINKS] = { .type = NLA_U8 },
[NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES] = { .type = NLA_U8 },
[NL80211_MESHCONF_PATH_REFRESH_TIME] = { .type = NLA_U32 },
[NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT] = { .type = NLA_U16 },
[NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT] = { .type = NLA_U32 },
[NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL] = { .type = NLA_U16 },
[NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME] = { .type = NLA_U16 },
};
static int nl80211_set_mesh_params(struct sk_buff *skb, struct genl_info *info)
{
int err;
u32 mask;
struct cfg80211_registered_device *drv;
struct net_device *dev;
struct mesh_config cfg;
struct nlattr *tb[NL80211_MESHCONF_ATTR_MAX + 1];
struct nlattr *parent_attr;
parent_attr = info->attrs[NL80211_ATTR_MESH_PARAMS];
if (!parent_attr)
return -EINVAL;
if (nla_parse_nested(tb, NL80211_MESHCONF_ATTR_MAX,
parent_attr, nl80211_meshconf_params_policy))
return -EINVAL;
rtnl_lock();
err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
if (err)
goto out_rtnl;
if (!drv->ops->set_mesh_params) {
err = -EOPNOTSUPP;
goto out;
}
/* This makes sure that there aren't more than 32 mesh config
* parameters (otherwise our bitfield scheme would not work.) */
BUILD_BUG_ON(NL80211_MESHCONF_ATTR_MAX > 32);
/* Fill in the params struct */
mask = 0;
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshRetryTimeout,
mask, NL80211_MESHCONF_RETRY_TIMEOUT, nla_get_u16);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshConfirmTimeout,
mask, NL80211_MESHCONF_CONFIRM_TIMEOUT, nla_get_u16);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHoldingTimeout,
mask, NL80211_MESHCONF_HOLDING_TIMEOUT, nla_get_u16);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshMaxPeerLinks,
mask, NL80211_MESHCONF_MAX_PEER_LINKS, nla_get_u16);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshMaxRetries,
mask, NL80211_MESHCONF_MAX_RETRIES, nla_get_u8);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshTTL,
mask, NL80211_MESHCONF_TTL, nla_get_u8);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, auto_open_plinks,
mask, NL80211_MESHCONF_AUTO_OPEN_PLINKS, nla_get_u8);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMPmaxPREQretries,
mask, NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES,
nla_get_u8);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, path_refresh_time,
mask, NL80211_MESHCONF_PATH_REFRESH_TIME, nla_get_u32);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, min_discovery_timeout,
mask, NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT,
nla_get_u16);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMPactivePathTimeout,
mask, NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT,
nla_get_u32);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMPpreqMinInterval,
mask, NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL,
nla_get_u16);
FILL_IN_MESH_PARAM_IF_SET(tb, cfg,
dot11MeshHWMPnetDiameterTraversalTime,
mask, NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME,
nla_get_u16);
/* Apply changes */
err = drv->ops->set_mesh_params(&drv->wiphy, dev, &cfg, mask);
out:
/* cleanup */
cfg80211_put_dev(drv);
dev_put(dev);
out_rtnl:
rtnl_unlock();
return err;
}
#undef FILL_IN_MESH_PARAM_IF_SET
static int nl80211_get_reg(struct sk_buff *skb, struct genl_info *info)
{
struct sk_buff *msg;
void *hdr = NULL;
struct nlattr *nl_reg_rules;
unsigned int i;
int err = -EINVAL;
mutex_lock(&cfg80211_mutex);
if (!cfg80211_regdomain)
goto out;
msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
if (!msg) {
err = -ENOBUFS;
goto out;
}
hdr = nl80211hdr_put(msg, info->snd_pid, info->snd_seq, 0,
NL80211_CMD_GET_REG);
if (!hdr)
goto nla_put_failure;
NLA_PUT_STRING(msg, NL80211_ATTR_REG_ALPHA2,
cfg80211_regdomain->alpha2);
nl_reg_rules = nla_nest_start(msg, NL80211_ATTR_REG_RULES);
if (!nl_reg_rules)
goto nla_put_failure;
for (i = 0; i < cfg80211_regdomain->n_reg_rules; i++) {
struct nlattr *nl_reg_rule;
const struct ieee80211_reg_rule *reg_rule;
const struct ieee80211_freq_range *freq_range;
const struct ieee80211_power_rule *power_rule;
reg_rule = &cfg80211_regdomain->reg_rules[i];
freq_range = &reg_rule->freq_range;
power_rule = &reg_rule->power_rule;
nl_reg_rule = nla_nest_start(msg, i);
if (!nl_reg_rule)
goto nla_put_failure;
NLA_PUT_U32(msg, NL80211_ATTR_REG_RULE_FLAGS,
reg_rule->flags);
NLA_PUT_U32(msg, NL80211_ATTR_FREQ_RANGE_START,
freq_range->start_freq_khz);
NLA_PUT_U32(msg, NL80211_ATTR_FREQ_RANGE_END,
freq_range->end_freq_khz);
NLA_PUT_U32(msg, NL80211_ATTR_FREQ_RANGE_MAX_BW,
freq_range->max_bandwidth_khz);
NLA_PUT_U32(msg, NL80211_ATTR_POWER_RULE_MAX_ANT_GAIN,
power_rule->max_antenna_gain);
NLA_PUT_U32(msg, NL80211_ATTR_POWER_RULE_MAX_EIRP,
power_rule->max_eirp);
nla_nest_end(msg, nl_reg_rule);
}
nla_nest_end(msg, nl_reg_rules);
genlmsg_end(msg, hdr);
err = genlmsg_unicast(msg, info->snd_pid);
goto out;
nla_put_failure:
genlmsg_cancel(msg, hdr);
err = -EMSGSIZE;
out:
mutex_unlock(&cfg80211_mutex);
return err;
}
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 06:19:48 +00:00
static int nl80211_set_reg(struct sk_buff *skb, struct genl_info *info)
{
struct nlattr *tb[NL80211_REG_RULE_ATTR_MAX + 1];
struct nlattr *nl_reg_rule;
char *alpha2 = NULL;
int rem_reg_rules = 0, r = 0;
u32 num_rules = 0, rule_idx = 0, size_of_regd;
struct ieee80211_regdomain *rd = NULL;
if (!info->attrs[NL80211_ATTR_REG_ALPHA2])
return -EINVAL;
if (!info->attrs[NL80211_ATTR_REG_RULES])
return -EINVAL;
alpha2 = nla_data(info->attrs[NL80211_ATTR_REG_ALPHA2]);
nla_for_each_nested(nl_reg_rule, info->attrs[NL80211_ATTR_REG_RULES],
rem_reg_rules) {
num_rules++;
if (num_rules > NL80211_MAX_SUPP_REG_RULES)
return -EINVAL;
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 06:19:48 +00:00
}
mutex_lock(&cfg80211_mutex);
if (!reg_is_valid_request(alpha2)) {
r = -EINVAL;
goto bad_reg;
}
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 06:19:48 +00:00
size_of_regd = sizeof(struct ieee80211_regdomain) +
(num_rules * sizeof(struct ieee80211_reg_rule));
rd = kzalloc(size_of_regd, GFP_KERNEL);
if (!rd) {
r = -ENOMEM;
goto bad_reg;
}
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 06:19:48 +00:00
rd->n_reg_rules = num_rules;
rd->alpha2[0] = alpha2[0];
rd->alpha2[1] = alpha2[1];
nla_for_each_nested(nl_reg_rule, info->attrs[NL80211_ATTR_REG_RULES],
rem_reg_rules) {
nla_parse(tb, NL80211_REG_RULE_ATTR_MAX,
nla_data(nl_reg_rule), nla_len(nl_reg_rule),
reg_rule_policy);
r = parse_reg_rule(tb, &rd->reg_rules[rule_idx]);
if (r)
goto bad_reg;
rule_idx++;
if (rule_idx > NL80211_MAX_SUPP_REG_RULES) {
r = -EINVAL;
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 06:19:48 +00:00
goto bad_reg;
}
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 06:19:48 +00:00
}
BUG_ON(rule_idx != num_rules);
r = set_regdom(rd);
mutex_unlock(&cfg80211_mutex);
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 06:19:48 +00:00
return r;
bad_reg:
mutex_unlock(&cfg80211_mutex);
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 06:19:48 +00:00
kfree(rd);
return r;
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 06:19:48 +00:00
}
static int validate_scan_freqs(struct nlattr *freqs)
{
struct nlattr *attr1, *attr2;
int n_channels = 0, tmp1, tmp2;
nla_for_each_nested(attr1, freqs, tmp1) {
n_channels++;
/*
* Some hardware has a limited channel list for
* scanning, and it is pretty much nonsensical
* to scan for a channel twice, so disallow that
* and don't require drivers to check that the
* channel list they get isn't longer than what
* they can scan, as long as they can scan all
* the channels they registered at once.
*/
nla_for_each_nested(attr2, freqs, tmp2)
if (attr1 != attr2 &&
nla_get_u32(attr1) == nla_get_u32(attr2))
return 0;
}
return n_channels;
}
static int nl80211_trigger_scan(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *drv;
struct net_device *dev;
struct cfg80211_scan_request *request;
struct cfg80211_ssid *ssid;
struct ieee80211_channel *channel;
struct nlattr *attr;
struct wiphy *wiphy;
int err, tmp, n_ssids = 0, n_channels, i;
enum ieee80211_band band;
size_t ie_len;
if (!is_valid_ie_attr(info->attrs[NL80211_ATTR_IE]))
return -EINVAL;
rtnl_lock();
err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
if (err)
goto out_rtnl;
wiphy = &drv->wiphy;
if (!drv->ops->scan) {
err = -EOPNOTSUPP;
goto out;
}
if (!netif_running(dev)) {
err = -ENETDOWN;
goto out;
}
if (drv->scan_req) {
err = -EBUSY;
goto out;
}
if (info->attrs[NL80211_ATTR_SCAN_FREQUENCIES]) {
n_channels = validate_scan_freqs(
info->attrs[NL80211_ATTR_SCAN_FREQUENCIES]);
if (!n_channels) {
err = -EINVAL;
goto out;
}
} else {
n_channels = 0;
for (band = 0; band < IEEE80211_NUM_BANDS; band++)
if (wiphy->bands[band])
n_channels += wiphy->bands[band]->n_channels;
}
if (info->attrs[NL80211_ATTR_SCAN_SSIDS])
nla_for_each_nested(attr, info->attrs[NL80211_ATTR_SCAN_SSIDS], tmp)
n_ssids++;
if (n_ssids > wiphy->max_scan_ssids) {
err = -EINVAL;
goto out;
}
if (info->attrs[NL80211_ATTR_IE])
ie_len = nla_len(info->attrs[NL80211_ATTR_IE]);
else
ie_len = 0;
if (ie_len > wiphy->max_scan_ie_len) {
err = -EINVAL;
goto out;
}
request = kzalloc(sizeof(*request)
+ sizeof(*ssid) * n_ssids
+ sizeof(channel) * n_channels
+ ie_len, GFP_KERNEL);
if (!request) {
err = -ENOMEM;
goto out;
}
request->channels = (void *)((char *)request + sizeof(*request));
request->n_channels = n_channels;
if (n_ssids)
request->ssids = (void *)(request->channels + n_channels);
request->n_ssids = n_ssids;
if (ie_len) {
if (request->ssids)
request->ie = (void *)(request->ssids + n_ssids);
else
request->ie = (void *)(request->channels + n_channels);
}
if (info->attrs[NL80211_ATTR_SCAN_FREQUENCIES]) {
/* user specified, bail out if channel not found */
request->n_channels = n_channels;
i = 0;
nla_for_each_nested(attr, info->attrs[NL80211_ATTR_SCAN_FREQUENCIES], tmp) {
request->channels[i] = ieee80211_get_channel(wiphy, nla_get_u32(attr));
if (!request->channels[i]) {
err = -EINVAL;
goto out_free;
}
i++;
}
} else {
/* all channels */
i = 0;
for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
int j;
if (!wiphy->bands[band])
continue;
for (j = 0; j < wiphy->bands[band]->n_channels; j++) {
request->channels[i] = &wiphy->bands[band]->channels[j];
i++;
}
}
}
i = 0;
if (info->attrs[NL80211_ATTR_SCAN_SSIDS]) {
nla_for_each_nested(attr, info->attrs[NL80211_ATTR_SCAN_SSIDS], tmp) {
if (request->ssids[i].ssid_len > IEEE80211_MAX_SSID_LEN) {
err = -EINVAL;
goto out_free;
}
memcpy(request->ssids[i].ssid, nla_data(attr), nla_len(attr));
request->ssids[i].ssid_len = nla_len(attr);
i++;
}
}
if (info->attrs[NL80211_ATTR_IE]) {
request->ie_len = nla_len(info->attrs[NL80211_ATTR_IE]);
memcpy((void *)request->ie,
nla_data(info->attrs[NL80211_ATTR_IE]),
request->ie_len);
}
request->ifidx = dev->ifindex;
request->wiphy = &drv->wiphy;
drv->scan_req = request;
err = drv->ops->scan(&drv->wiphy, dev, request);
if (!err)
nl80211_send_scan_start(drv, dev);
out_free:
if (err) {
drv->scan_req = NULL;
kfree(request);
}
out:
cfg80211_put_dev(drv);
dev_put(dev);
out_rtnl:
rtnl_unlock();
return err;
}
static int nl80211_send_bss(struct sk_buff *msg, u32 pid, u32 seq, int flags,
struct cfg80211_registered_device *rdev,
struct net_device *dev,
struct cfg80211_bss *res)
{
void *hdr;
struct nlattr *bss;
hdr = nl80211hdr_put(msg, pid, seq, flags,
NL80211_CMD_NEW_SCAN_RESULTS);
if (!hdr)
return -1;
NLA_PUT_U32(msg, NL80211_ATTR_SCAN_GENERATION,
rdev->bss_generation);
NLA_PUT_U32(msg, NL80211_ATTR_IFINDEX, dev->ifindex);
bss = nla_nest_start(msg, NL80211_ATTR_BSS);
if (!bss)
goto nla_put_failure;
if (!is_zero_ether_addr(res->bssid))
NLA_PUT(msg, NL80211_BSS_BSSID, ETH_ALEN, res->bssid);
if (res->information_elements && res->len_information_elements)
NLA_PUT(msg, NL80211_BSS_INFORMATION_ELEMENTS,
res->len_information_elements,
res->information_elements);
if (res->tsf)
NLA_PUT_U64(msg, NL80211_BSS_TSF, res->tsf);
if (res->beacon_interval)
NLA_PUT_U16(msg, NL80211_BSS_BEACON_INTERVAL, res->beacon_interval);
NLA_PUT_U16(msg, NL80211_BSS_CAPABILITY, res->capability);
NLA_PUT_U32(msg, NL80211_BSS_FREQUENCY, res->channel->center_freq);
switch (rdev->wiphy.signal_type) {
case CFG80211_SIGNAL_TYPE_MBM:
NLA_PUT_U32(msg, NL80211_BSS_SIGNAL_MBM, res->signal);
break;
case CFG80211_SIGNAL_TYPE_UNSPEC:
NLA_PUT_U8(msg, NL80211_BSS_SIGNAL_UNSPEC, res->signal);
break;
default:
break;
}
nla_nest_end(msg, bss);
return genlmsg_end(msg, hdr);
nla_put_failure:
genlmsg_cancel(msg, hdr);
return -EMSGSIZE;
}
static int nl80211_dump_scan(struct sk_buff *skb,
struct netlink_callback *cb)
{
struct cfg80211_registered_device *dev;
struct net_device *netdev;
struct cfg80211_internal_bss *scan;
int ifidx = cb->args[0];
int start = cb->args[1], idx = 0;
int err;
if (!ifidx) {
err = nlmsg_parse(cb->nlh, GENL_HDRLEN + nl80211_fam.hdrsize,
nl80211_fam.attrbuf, nl80211_fam.maxattr,
nl80211_policy);
if (err)
return err;
if (!nl80211_fam.attrbuf[NL80211_ATTR_IFINDEX])
return -EINVAL;
ifidx = nla_get_u32(nl80211_fam.attrbuf[NL80211_ATTR_IFINDEX]);
if (!ifidx)
return -EINVAL;
cb->args[0] = ifidx;
}
netdev = dev_get_by_index(&init_net, ifidx);
if (!netdev)
return -ENODEV;
dev = cfg80211_get_dev_from_ifindex(ifidx);
if (IS_ERR(dev)) {
err = PTR_ERR(dev);
goto out_put_netdev;
}
spin_lock_bh(&dev->bss_lock);
cfg80211_bss_expire(dev);
list_for_each_entry(scan, &dev->bss_list, list) {
if (++idx <= start)
continue;
if (nl80211_send_bss(skb,
NETLINK_CB(cb->skb).pid,
cb->nlh->nlmsg_seq, NLM_F_MULTI,
dev, netdev, &scan->pub) < 0) {
idx--;
goto out;
}
}
out:
spin_unlock_bh(&dev->bss_lock);
cb->args[1] = idx;
err = skb->len;
cfg80211_put_dev(dev);
out_put_netdev:
dev_put(netdev);
return err;
}
static bool nl80211_valid_auth_type(enum nl80211_auth_type auth_type)
{
return auth_type <= NL80211_AUTHTYPE_MAX;
}
static bool nl80211_valid_wpa_versions(u32 wpa_versions)
{
return !(wpa_versions & ~(NL80211_WPA_VERSION_1 |
NL80211_WPA_VERSION_2));
}
static bool nl80211_valid_akm_suite(u32 akm)
{
return akm == WLAN_AKM_SUITE_8021X ||
akm == WLAN_AKM_SUITE_PSK;
}
static bool nl80211_valid_cipher_suite(u32 cipher)
{
return cipher == WLAN_CIPHER_SUITE_WEP40 ||
cipher == WLAN_CIPHER_SUITE_WEP104 ||
cipher == WLAN_CIPHER_SUITE_TKIP ||
cipher == WLAN_CIPHER_SUITE_CCMP ||
cipher == WLAN_CIPHER_SUITE_AES_CMAC;
}
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 11:39:22 +00:00
static int nl80211_authenticate(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *drv;
struct net_device *dev;
struct ieee80211_channel *chan;
const u8 *bssid, *ssid, *ie = NULL;
int err, ssid_len, ie_len = 0;
enum nl80211_auth_type auth_type;
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 11:39:22 +00:00
if (!is_valid_ie_attr(info->attrs[NL80211_ATTR_IE]))
return -EINVAL;
if (!info->attrs[NL80211_ATTR_MAC])
return -EINVAL;
if (!info->attrs[NL80211_ATTR_AUTH_TYPE])
return -EINVAL;
if (!info->attrs[NL80211_ATTR_SSID])
return -EINVAL;
if (!info->attrs[NL80211_ATTR_WIPHY_FREQ])
return -EINVAL;
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 11:39:22 +00:00
rtnl_lock();
err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
if (err)
goto unlock_rtnl;
if (!drv->ops->auth) {
err = -EOPNOTSUPP;
goto out;
}
if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_STATION) {
err = -EOPNOTSUPP;
goto out;
}
if (!netif_running(dev)) {
err = -ENETDOWN;
goto out;
}
bssid = nla_data(info->attrs[NL80211_ATTR_MAC]);
chan = ieee80211_get_channel(&drv->wiphy,
nla_get_u32(info->attrs[NL80211_ATTR_WIPHY_FREQ]));
if (!chan || (chan->flags & IEEE80211_CHAN_DISABLED)) {
err = -EINVAL;
goto out;
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 11:39:22 +00:00
}
ssid = nla_data(info->attrs[NL80211_ATTR_SSID]);
ssid_len = nla_len(info->attrs[NL80211_ATTR_SSID]);
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 11:39:22 +00:00
if (info->attrs[NL80211_ATTR_IE]) {
ie = nla_data(info->attrs[NL80211_ATTR_IE]);
ie_len = nla_len(info->attrs[NL80211_ATTR_IE]);
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 11:39:22 +00:00
}
auth_type = nla_get_u32(info->attrs[NL80211_ATTR_AUTH_TYPE]);
if (!nl80211_valid_auth_type(auth_type)) {
err = -EINVAL;
goto out;
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 11:39:22 +00:00
}
err = cfg80211_mlme_auth(drv, dev, chan, auth_type, bssid,
ssid, ssid_len, ie, ie_len);
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 11:39:22 +00:00
out:
cfg80211_put_dev(drv);
dev_put(dev);
unlock_rtnl:
rtnl_unlock();
return err;
}
static int nl80211_crypto_settings(struct genl_info *info,
struct cfg80211_crypto_settings *settings,
int cipher_limit)
{
settings->control_port = info->attrs[NL80211_ATTR_CONTROL_PORT];
if (info->attrs[NL80211_ATTR_CIPHER_SUITES_PAIRWISE]) {
void *data;
int len, i;
data = nla_data(info->attrs[NL80211_ATTR_CIPHER_SUITES_PAIRWISE]);
len = nla_len(info->attrs[NL80211_ATTR_CIPHER_SUITES_PAIRWISE]);
settings->n_ciphers_pairwise = len / sizeof(u32);
if (len % sizeof(u32))
return -EINVAL;
if (settings->n_ciphers_pairwise > cipher_limit)
return -EINVAL;
memcpy(settings->ciphers_pairwise, data, len);
for (i = 0; i < settings->n_ciphers_pairwise; i++)
if (!nl80211_valid_cipher_suite(
settings->ciphers_pairwise[i]))
return -EINVAL;
}
if (info->attrs[NL80211_ATTR_CIPHER_SUITE_GROUP]) {
settings->cipher_group =
nla_get_u32(info->attrs[NL80211_ATTR_CIPHER_SUITE_GROUP]);
if (!nl80211_valid_cipher_suite(settings->cipher_group))
return -EINVAL;
}
if (info->attrs[NL80211_ATTR_WPA_VERSIONS]) {
settings->wpa_versions =
nla_get_u32(info->attrs[NL80211_ATTR_WPA_VERSIONS]);
if (!nl80211_valid_wpa_versions(settings->wpa_versions))
return -EINVAL;
}
if (info->attrs[NL80211_ATTR_AKM_SUITES]) {
void *data;
int len, i;
data = nla_data(info->attrs[NL80211_ATTR_AKM_SUITES]);
len = nla_len(info->attrs[NL80211_ATTR_AKM_SUITES]);
settings->n_akm_suites = len / sizeof(u32);
if (len % sizeof(u32))
return -EINVAL;
memcpy(settings->akm_suites, data, len);
for (i = 0; i < settings->n_ciphers_pairwise; i++)
if (!nl80211_valid_akm_suite(settings->akm_suites[i]))
return -EINVAL;
}
return 0;
}
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 11:39:22 +00:00
static int nl80211_associate(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev;
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 11:39:22 +00:00
struct net_device *dev;
struct cfg80211_crypto_settings crypto;
struct ieee80211_channel *chan;
const u8 *bssid, *ssid, *ie = NULL;
int err, ssid_len, ie_len = 0;
bool use_mfp = false;
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 11:39:22 +00:00
if (!is_valid_ie_attr(info->attrs[NL80211_ATTR_IE]))
return -EINVAL;
if (!info->attrs[NL80211_ATTR_MAC] ||
!info->attrs[NL80211_ATTR_SSID] ||
!info->attrs[NL80211_ATTR_WIPHY_FREQ])
return -EINVAL;
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 11:39:22 +00:00
rtnl_lock();
err = get_drv_dev_by_info_ifindex(info->attrs, &rdev, &dev);
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 11:39:22 +00:00
if (err)
goto unlock_rtnl;
if (!rdev->ops->assoc) {
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 11:39:22 +00:00
err = -EOPNOTSUPP;
goto out;
}
if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_STATION) {
err = -EOPNOTSUPP;
goto out;
}
if (!netif_running(dev)) {
err = -ENETDOWN;
goto out;
}
bssid = nla_data(info->attrs[NL80211_ATTR_MAC]);
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 11:39:22 +00:00
chan = ieee80211_get_channel(&rdev->wiphy,
nla_get_u32(info->attrs[NL80211_ATTR_WIPHY_FREQ]));
if (!chan || (chan->flags & IEEE80211_CHAN_DISABLED)) {
err = -EINVAL;
goto out;
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 11:39:22 +00:00
}
ssid = nla_data(info->attrs[NL80211_ATTR_SSID]);
ssid_len = nla_len(info->attrs[NL80211_ATTR_SSID]);
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 11:39:22 +00:00
if (info->attrs[NL80211_ATTR_IE]) {
ie = nla_data(info->attrs[NL80211_ATTR_IE]);
ie_len = nla_len(info->attrs[NL80211_ATTR_IE]);
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 11:39:22 +00:00
}
if (info->attrs[NL80211_ATTR_USE_MFP]) {
enum nl80211_mfp use_mfp =
nla_get_u32(info->attrs[NL80211_ATTR_USE_MFP]);
if (use_mfp == NL80211_MFP_REQUIRED)
use_mfp = true;
else if (use_mfp != NL80211_MFP_NO) {
err = -EINVAL;
goto out;
}
}
err = nl80211_crypto_settings(info, &crypto, 1);
if (!err)
err = cfg80211_mlme_assoc(rdev, dev, chan, bssid, ssid,
ssid_len, ie, ie_len, use_mfp,
&crypto);
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 11:39:22 +00:00
out:
cfg80211_put_dev(rdev);
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 11:39:22 +00:00
dev_put(dev);
unlock_rtnl:
rtnl_unlock();
return err;
}
static int nl80211_deauthenticate(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *drv;
struct net_device *dev;
const u8 *ie = NULL, *bssid;
int err, ie_len = 0;
u16 reason_code;
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 11:39:22 +00:00
if (!is_valid_ie_attr(info->attrs[NL80211_ATTR_IE]))
return -EINVAL;
if (!info->attrs[NL80211_ATTR_MAC])
return -EINVAL;
if (!info->attrs[NL80211_ATTR_REASON_CODE])
return -EINVAL;
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 11:39:22 +00:00
rtnl_lock();
err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
if (err)
goto unlock_rtnl;
if (!drv->ops->deauth) {
err = -EOPNOTSUPP;
goto out;
}
if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_STATION) {
err = -EOPNOTSUPP;
goto out;
}
if (!netif_running(dev)) {
err = -ENETDOWN;
goto out;
}
bssid = nla_data(info->attrs[NL80211_ATTR_MAC]);
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 11:39:22 +00:00
reason_code = nla_get_u16(info->attrs[NL80211_ATTR_REASON_CODE]);
if (reason_code == 0) {
/* Reason Code 0 is reserved */
err = -EINVAL;
goto out;
}
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 11:39:22 +00:00
if (info->attrs[NL80211_ATTR_IE]) {
ie = nla_data(info->attrs[NL80211_ATTR_IE]);
ie_len = nla_len(info->attrs[NL80211_ATTR_IE]);
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 11:39:22 +00:00
}
err = cfg80211_mlme_deauth(drv, dev, bssid, ie, ie_len, reason_code);
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 11:39:22 +00:00
out:
cfg80211_put_dev(drv);
dev_put(dev);
unlock_rtnl:
rtnl_unlock();
return err;
}
static int nl80211_disassociate(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *drv;
struct net_device *dev;
const u8 *ie = NULL, *bssid;
int err, ie_len = 0;
u16 reason_code;
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 11:39:22 +00:00
if (!is_valid_ie_attr(info->attrs[NL80211_ATTR_IE]))
return -EINVAL;
if (!info->attrs[NL80211_ATTR_MAC])
return -EINVAL;
if (!info->attrs[NL80211_ATTR_REASON_CODE])
return -EINVAL;
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 11:39:22 +00:00
rtnl_lock();
err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
if (err)
goto unlock_rtnl;
if (!drv->ops->disassoc) {
err = -EOPNOTSUPP;
goto out;
}
if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_STATION) {
err = -EOPNOTSUPP;
goto out;
}
if (!netif_running(dev)) {
err = -ENETDOWN;
goto out;
}
bssid = nla_data(info->attrs[NL80211_ATTR_MAC]);
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 11:39:22 +00:00
reason_code = nla_get_u16(info->attrs[NL80211_ATTR_REASON_CODE]);
if (reason_code == 0) {
/* Reason Code 0 is reserved */
err = -EINVAL;
goto out;
}
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 11:39:22 +00:00
if (info->attrs[NL80211_ATTR_IE]) {
ie = nla_data(info->attrs[NL80211_ATTR_IE]);
ie_len = nla_len(info->attrs[NL80211_ATTR_IE]);
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 11:39:22 +00:00
}
err = cfg80211_mlme_disassoc(drv, dev, bssid, ie, ie_len, reason_code);
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 11:39:22 +00:00
out:
cfg80211_put_dev(drv);
dev_put(dev);
unlock_rtnl:
rtnl_unlock();
return err;
}
static int nl80211_join_ibss(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *drv;
struct net_device *dev;
struct cfg80211_ibss_params ibss;
struct wiphy *wiphy;
int err;
memset(&ibss, 0, sizeof(ibss));
if (!is_valid_ie_attr(info->attrs[NL80211_ATTR_IE]))
return -EINVAL;
if (!info->attrs[NL80211_ATTR_WIPHY_FREQ] ||
!info->attrs[NL80211_ATTR_SSID] ||
!nla_len(info->attrs[NL80211_ATTR_SSID]))
return -EINVAL;
ibss.beacon_interval = 100;
if (info->attrs[NL80211_ATTR_BEACON_INTERVAL]) {
ibss.beacon_interval =
nla_get_u32(info->attrs[NL80211_ATTR_BEACON_INTERVAL]);
if (ibss.beacon_interval < 1 || ibss.beacon_interval > 10000)
return -EINVAL;
}
rtnl_lock();
err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
if (err)
goto unlock_rtnl;
if (!drv->ops->join_ibss) {
err = -EOPNOTSUPP;
goto out;
}
if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_ADHOC) {
err = -EOPNOTSUPP;
goto out;
}
if (!netif_running(dev)) {
err = -ENETDOWN;
goto out;
}
wiphy = &drv->wiphy;
if (info->attrs[NL80211_ATTR_MAC])
ibss.bssid = nla_data(info->attrs[NL80211_ATTR_MAC]);
ibss.ssid = nla_data(info->attrs[NL80211_ATTR_SSID]);
ibss.ssid_len = nla_len(info->attrs[NL80211_ATTR_SSID]);
if (info->attrs[NL80211_ATTR_IE]) {
ibss.ie = nla_data(info->attrs[NL80211_ATTR_IE]);
ibss.ie_len = nla_len(info->attrs[NL80211_ATTR_IE]);
}
ibss.channel = ieee80211_get_channel(wiphy,
nla_get_u32(info->attrs[NL80211_ATTR_WIPHY_FREQ]));
if (!ibss.channel ||
ibss.channel->flags & IEEE80211_CHAN_NO_IBSS ||
ibss.channel->flags & IEEE80211_CHAN_DISABLED) {
err = -EINVAL;
goto out;
}
ibss.channel_fixed = !!info->attrs[NL80211_ATTR_FREQ_FIXED];
err = cfg80211_join_ibss(drv, dev, &ibss);
out:
cfg80211_put_dev(drv);
dev_put(dev);
unlock_rtnl:
rtnl_unlock();
return err;
}
static int nl80211_leave_ibss(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *drv;
struct net_device *dev;
int err;
rtnl_lock();
err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
if (err)
goto unlock_rtnl;
if (!drv->ops->leave_ibss) {
err = -EOPNOTSUPP;
goto out;
}
if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_ADHOC) {
err = -EOPNOTSUPP;
goto out;
}
if (!netif_running(dev)) {
err = -ENETDOWN;
goto out;
}
err = cfg80211_leave_ibss(drv, dev, false);
out:
cfg80211_put_dev(drv);
dev_put(dev);
unlock_rtnl:
rtnl_unlock();
return err;
}
#ifdef CONFIG_NL80211_TESTMODE
static struct genl_multicast_group nl80211_testmode_mcgrp = {
.name = "testmode",
};
static int nl80211_testmode_do(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *rdev;
int err;
if (!info->attrs[NL80211_ATTR_TESTDATA])
return -EINVAL;
rtnl_lock();
rdev = cfg80211_get_dev_from_info(info);
if (IS_ERR(rdev)) {
err = PTR_ERR(rdev);
goto unlock_rtnl;
}
err = -EOPNOTSUPP;
if (rdev->ops->testmode_cmd) {
rdev->testmode_info = info;
err = rdev->ops->testmode_cmd(&rdev->wiphy,
nla_data(info->attrs[NL80211_ATTR_TESTDATA]),
nla_len(info->attrs[NL80211_ATTR_TESTDATA]));
rdev->testmode_info = NULL;
}
cfg80211_put_dev(rdev);
unlock_rtnl:
rtnl_unlock();
return err;
}
static struct sk_buff *
__cfg80211_testmode_alloc_skb(struct cfg80211_registered_device *rdev,
int approxlen, u32 pid, u32 seq, gfp_t gfp)
{
struct sk_buff *skb;
void *hdr;
struct nlattr *data;
skb = nlmsg_new(approxlen + 100, gfp);
if (!skb)
return NULL;
hdr = nl80211hdr_put(skb, pid, seq, 0, NL80211_CMD_TESTMODE);
if (!hdr) {
kfree_skb(skb);
return NULL;
}
NLA_PUT_U32(skb, NL80211_ATTR_WIPHY, rdev->wiphy_idx);
data = nla_nest_start(skb, NL80211_ATTR_TESTDATA);
((void **)skb->cb)[0] = rdev;
((void **)skb->cb)[1] = hdr;
((void **)skb->cb)[2] = data;
return skb;
nla_put_failure:
kfree_skb(skb);
return NULL;
}
struct sk_buff *cfg80211_testmode_alloc_reply_skb(struct wiphy *wiphy,
int approxlen)
{
struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
if (WARN_ON(!rdev->testmode_info))
return NULL;
return __cfg80211_testmode_alloc_skb(rdev, approxlen,
rdev->testmode_info->snd_pid,
rdev->testmode_info->snd_seq,
GFP_KERNEL);
}
EXPORT_SYMBOL(cfg80211_testmode_alloc_reply_skb);
int cfg80211_testmode_reply(struct sk_buff *skb)
{
struct cfg80211_registered_device *rdev = ((void **)skb->cb)[0];
void *hdr = ((void **)skb->cb)[1];
struct nlattr *data = ((void **)skb->cb)[2];
if (WARN_ON(!rdev->testmode_info)) {
kfree_skb(skb);
return -EINVAL;
}
nla_nest_end(skb, data);
genlmsg_end(skb, hdr);
return genlmsg_reply(skb, rdev->testmode_info);
}
EXPORT_SYMBOL(cfg80211_testmode_reply);
struct sk_buff *cfg80211_testmode_alloc_event_skb(struct wiphy *wiphy,
int approxlen, gfp_t gfp)
{
struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
return __cfg80211_testmode_alloc_skb(rdev, approxlen, 0, 0, gfp);
}
EXPORT_SYMBOL(cfg80211_testmode_alloc_event_skb);
void cfg80211_testmode_event(struct sk_buff *skb, gfp_t gfp)
{
void *hdr = ((void **)skb->cb)[1];
struct nlattr *data = ((void **)skb->cb)[2];
nla_nest_end(skb, data);
genlmsg_end(skb, hdr);
genlmsg_multicast(skb, 0, nl80211_testmode_mcgrp.id, gfp);
}
EXPORT_SYMBOL(cfg80211_testmode_event);
#endif
static int nl80211_connect(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *drv;
struct net_device *dev;
struct cfg80211_connect_params connect;
struct wiphy *wiphy;
int err;
memset(&connect, 0, sizeof(connect));
if (!is_valid_ie_attr(info->attrs[NL80211_ATTR_IE]))
return -EINVAL;
if (!info->attrs[NL80211_ATTR_SSID] ||
!nla_len(info->attrs[NL80211_ATTR_SSID]))
return -EINVAL;
if (info->attrs[NL80211_ATTR_AUTH_TYPE]) {
connect.auth_type =
nla_get_u32(info->attrs[NL80211_ATTR_AUTH_TYPE]);
if (!nl80211_valid_auth_type(connect.auth_type))
return -EINVAL;
} else
connect.auth_type = NL80211_AUTHTYPE_AUTOMATIC;
connect.privacy = info->attrs[NL80211_ATTR_PRIVACY];
err = nl80211_crypto_settings(info, &connect.crypto,
NL80211_MAX_NR_CIPHER_SUITES);
if (err)
return err;
rtnl_lock();
err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
if (err)
goto unlock_rtnl;
if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_STATION) {
err = -EOPNOTSUPP;
goto out;
}
if (!netif_running(dev)) {
err = -ENETDOWN;
goto out;
}
wiphy = &drv->wiphy;
connect.bssid = NULL;
connect.channel = NULL;
connect.auth_type = NL80211_AUTHTYPE_OPEN_SYSTEM;
if (info->attrs[NL80211_ATTR_MAC])
connect.bssid = nla_data(info->attrs[NL80211_ATTR_MAC]);
connect.ssid = nla_data(info->attrs[NL80211_ATTR_SSID]);
connect.ssid_len = nla_len(info->attrs[NL80211_ATTR_SSID]);
if (info->attrs[NL80211_ATTR_IE]) {
connect.ie = nla_data(info->attrs[NL80211_ATTR_IE]);
connect.ie_len = nla_len(info->attrs[NL80211_ATTR_IE]);
}
if (info->attrs[NL80211_ATTR_WIPHY_FREQ]) {
connect.channel =
ieee80211_get_channel(wiphy,
nla_get_u32(info->attrs[NL80211_ATTR_WIPHY_FREQ]));
if (!connect.channel ||
connect.channel->flags & IEEE80211_CHAN_DISABLED) {
err = -EINVAL;
goto out;
}
}
err = cfg80211_connect(drv, dev, &connect);
out:
cfg80211_put_dev(drv);
dev_put(dev);
unlock_rtnl:
rtnl_unlock();
return err;
}
static int nl80211_disconnect(struct sk_buff *skb, struct genl_info *info)
{
struct cfg80211_registered_device *drv;
struct net_device *dev;
int err;
u16 reason;
if (!info->attrs[NL80211_ATTR_REASON_CODE])
reason = WLAN_REASON_DEAUTH_LEAVING;
else
reason = nla_get_u16(info->attrs[NL80211_ATTR_REASON_CODE]);
if (reason == 0)
return -EINVAL;
rtnl_lock();
err = get_drv_dev_by_info_ifindex(info->attrs, &drv, &dev);
if (err)
goto unlock_rtnl;
if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_STATION) {
err = -EOPNOTSUPP;
goto out;
}
if (!netif_running(dev)) {
err = -ENETDOWN;
goto out;
}
err = cfg80211_disconnect(drv, dev, reason, true);
out:
cfg80211_put_dev(drv);
dev_put(dev);
unlock_rtnl:
rtnl_unlock();
return err;
}
static struct genl_ops nl80211_ops[] = {
{
.cmd = NL80211_CMD_GET_WIPHY,
.doit = nl80211_get_wiphy,
.dumpit = nl80211_dump_wiphy,
.policy = nl80211_policy,
/* can be retrieved by unprivileged users */
},
{
.cmd = NL80211_CMD_SET_WIPHY,
.doit = nl80211_set_wiphy,
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
},
{
.cmd = NL80211_CMD_GET_INTERFACE,
.doit = nl80211_get_interface,
.dumpit = nl80211_dump_interface,
.policy = nl80211_policy,
/* can be retrieved by unprivileged users */
},
{
.cmd = NL80211_CMD_SET_INTERFACE,
.doit = nl80211_set_interface,
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
},
{
.cmd = NL80211_CMD_NEW_INTERFACE,
.doit = nl80211_new_interface,
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
},
{
.cmd = NL80211_CMD_DEL_INTERFACE,
.doit = nl80211_del_interface,
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
},
{
.cmd = NL80211_CMD_GET_KEY,
.doit = nl80211_get_key,
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
},
{
.cmd = NL80211_CMD_SET_KEY,
.doit = nl80211_set_key,
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
},
{
.cmd = NL80211_CMD_NEW_KEY,
.doit = nl80211_new_key,
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
},
{
.cmd = NL80211_CMD_DEL_KEY,
.doit = nl80211_del_key,
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
},
{
.cmd = NL80211_CMD_SET_BEACON,
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
.doit = nl80211_addset_beacon,
},
{
.cmd = NL80211_CMD_NEW_BEACON,
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
.doit = nl80211_addset_beacon,
},
{
.cmd = NL80211_CMD_DEL_BEACON,
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
.doit = nl80211_del_beacon,
},
{
.cmd = NL80211_CMD_GET_STATION,
.doit = nl80211_get_station,
.dumpit = nl80211_dump_station,
.policy = nl80211_policy,
},
{
.cmd = NL80211_CMD_SET_STATION,
.doit = nl80211_set_station,
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
},
{
.cmd = NL80211_CMD_NEW_STATION,
.doit = nl80211_new_station,
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
},
{
.cmd = NL80211_CMD_DEL_STATION,
.doit = nl80211_del_station,
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
},
{
.cmd = NL80211_CMD_GET_MPATH,
.doit = nl80211_get_mpath,
.dumpit = nl80211_dump_mpath,
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
},
{
.cmd = NL80211_CMD_SET_MPATH,
.doit = nl80211_set_mpath,
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
},
{
.cmd = NL80211_CMD_NEW_MPATH,
.doit = nl80211_new_mpath,
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
},
{
.cmd = NL80211_CMD_DEL_MPATH,
.doit = nl80211_del_mpath,
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
},
{
.cmd = NL80211_CMD_SET_BSS,
.doit = nl80211_set_bss,
.policy = nl80211_policy,
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 06:19:48 +00:00
.flags = GENL_ADMIN_PERM,
},
{
.cmd = NL80211_CMD_GET_REG,
.doit = nl80211_get_reg,
.policy = nl80211_policy,
/* can be retrieved by unprivileged users */
},
cfg80211: Add new wireless regulatory infrastructure This adds the new wireless regulatory infrastructure. The main motiviation behind this was to centralize regulatory code as each driver was implementing their own regulatory solution, and to replace the initial centralized code we have where: * only 3 regulatory domains are supported: US, JP and EU * regulatory domains can only be changed through module parameter * all rules were built statically in the kernel We now have support for regulatory domains for many countries and regulatory domains are now queried through a userspace agent through udev allowing distributions to update regulatory rules without updating the kernel. Each driver can regulatory_hint() a regulatory domain based on either their EEPROM mapped regulatory domain value to a respective ISO/IEC 3166-1 country code or pass an internally built regulatory domain. We also add support to let the user set the regulatory domain through userspace in case of faulty EEPROMs to further help compliance. Support for world roaming will be added soon for cards capable of this. For more information see: http://wireless.kernel.org/en/developers/Regulatory/CRDA For now we leave an option to enable the old module parameter, ieee80211_regdom, and to build the 3 old regdomains statically (US, JP and EU). This option is CONFIG_WIRELESS_OLD_REGULATORY. These old static definitions and the module parameter is being scheduled for removal for 2.6.29. Note that if you use this you won't make use of a world regulatory domain as its pointless. If you leave this option enabled and if CRDA is present and you use US or JP we will try to ask CRDA to update us a regulatory domain for us. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-10 06:19:48 +00:00
{
.cmd = NL80211_CMD_SET_REG,
.doit = nl80211_set_reg,
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
},
{
.cmd = NL80211_CMD_REQ_SET_REG,
.doit = nl80211_req_set_reg,
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
},
{
.cmd = NL80211_CMD_GET_MESH_PARAMS,
.doit = nl80211_get_mesh_params,
.policy = nl80211_policy,
/* can be retrieved by unprivileged users */
},
{
.cmd = NL80211_CMD_SET_MESH_PARAMS,
.doit = nl80211_set_mesh_params,
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
},
{
.cmd = NL80211_CMD_TRIGGER_SCAN,
.doit = nl80211_trigger_scan,
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
},
{
.cmd = NL80211_CMD_GET_SCAN,
.policy = nl80211_policy,
.dumpit = nl80211_dump_scan,
},
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 11:39:22 +00:00
{
.cmd = NL80211_CMD_AUTHENTICATE,
.doit = nl80211_authenticate,
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
},
{
.cmd = NL80211_CMD_ASSOCIATE,
.doit = nl80211_associate,
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
},
{
.cmd = NL80211_CMD_DEAUTHENTICATE,
.doit = nl80211_deauthenticate,
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
},
{
.cmd = NL80211_CMD_DISASSOCIATE,
.doit = nl80211_disassociate,
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
},
{
.cmd = NL80211_CMD_JOIN_IBSS,
.doit = nl80211_join_ibss,
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
},
{
.cmd = NL80211_CMD_LEAVE_IBSS,
.doit = nl80211_leave_ibss,
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
},
#ifdef CONFIG_NL80211_TESTMODE
{
.cmd = NL80211_CMD_TESTMODE,
.doit = nl80211_testmode_do,
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
},
#endif
{
.cmd = NL80211_CMD_CONNECT,
.doit = nl80211_connect,
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
},
{
.cmd = NL80211_CMD_DISCONNECT,
.doit = nl80211_disconnect,
.policy = nl80211_policy,
.flags = GENL_ADMIN_PERM,
},
};
static struct genl_multicast_group nl80211_mlme_mcgrp = {
.name = "mlme",
};
/* multicast groups */
static struct genl_multicast_group nl80211_config_mcgrp = {
.name = "config",
};
static struct genl_multicast_group nl80211_scan_mcgrp = {
.name = "scan",
};
static struct genl_multicast_group nl80211_regulatory_mcgrp = {
.name = "regulatory",
};
/* notification functions */
void nl80211_notify_dev_rename(struct cfg80211_registered_device *rdev)
{
struct sk_buff *msg;
msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
if (!msg)
return;
if (nl80211_send_wiphy(msg, 0, 0, 0, rdev) < 0) {
nlmsg_free(msg);
return;
}
genlmsg_multicast(msg, 0, nl80211_config_mcgrp.id, GFP_KERNEL);
}
static int nl80211_add_scan_req(struct sk_buff *msg,
struct cfg80211_registered_device *rdev)
{
struct cfg80211_scan_request *req = rdev->scan_req;
struct nlattr *nest;
int i;
if (WARN_ON(!req))
return 0;
nest = nla_nest_start(msg, NL80211_ATTR_SCAN_SSIDS);
if (!nest)
goto nla_put_failure;
for (i = 0; i < req->n_ssids; i++)
NLA_PUT(msg, i, req->ssids[i].ssid_len, req->ssids[i].ssid);
nla_nest_end(msg, nest);
nest = nla_nest_start(msg, NL80211_ATTR_SCAN_FREQUENCIES);
if (!nest)
goto nla_put_failure;
for (i = 0; i < req->n_channels; i++)
NLA_PUT_U32(msg, i, req->channels[i]->center_freq);
nla_nest_end(msg, nest);
if (req->ie)
NLA_PUT(msg, NL80211_ATTR_IE, req->ie_len, req->ie);
return 0;
nla_put_failure:
return -ENOBUFS;
}
static int nl80211_send_scan_msg(struct sk_buff *msg,
struct cfg80211_registered_device *rdev,
struct net_device *netdev,
u32 pid, u32 seq, int flags,
u32 cmd)
{
void *hdr;
hdr = nl80211hdr_put(msg, pid, seq, flags, cmd);
if (!hdr)
return -1;
NLA_PUT_U32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx);
NLA_PUT_U32(msg, NL80211_ATTR_IFINDEX, netdev->ifindex);
/* ignore errors and send incomplete event anyway */
nl80211_add_scan_req(msg, rdev);
return genlmsg_end(msg, hdr);
nla_put_failure:
genlmsg_cancel(msg, hdr);
return -EMSGSIZE;
}
void nl80211_send_scan_start(struct cfg80211_registered_device *rdev,
struct net_device *netdev)
{
struct sk_buff *msg;
msg = nlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL);
if (!msg)
return;
if (nl80211_send_scan_msg(msg, rdev, netdev, 0, 0, 0,
NL80211_CMD_TRIGGER_SCAN) < 0) {
nlmsg_free(msg);
return;
}
genlmsg_multicast(msg, 0, nl80211_scan_mcgrp.id, GFP_KERNEL);
}
void nl80211_send_scan_done(struct cfg80211_registered_device *rdev,
struct net_device *netdev)
{
struct sk_buff *msg;
msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
if (!msg)
return;
if (nl80211_send_scan_msg(msg, rdev, netdev, 0, 0, 0,
NL80211_CMD_NEW_SCAN_RESULTS) < 0) {
nlmsg_free(msg);
return;
}
genlmsg_multicast(msg, 0, nl80211_scan_mcgrp.id, GFP_KERNEL);
}
void nl80211_send_scan_aborted(struct cfg80211_registered_device *rdev,
struct net_device *netdev)
{
struct sk_buff *msg;
msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
if (!msg)
return;
if (nl80211_send_scan_msg(msg, rdev, netdev, 0, 0, 0,
NL80211_CMD_SCAN_ABORTED) < 0) {
nlmsg_free(msg);
return;
}
genlmsg_multicast(msg, 0, nl80211_scan_mcgrp.id, GFP_KERNEL);
}
/*
* This can happen on global regulatory changes or device specific settings
* based on custom world regulatory domains.
*/
void nl80211_send_reg_change_event(struct regulatory_request *request)
{
struct sk_buff *msg;
void *hdr;
msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
if (!msg)
return;
hdr = nl80211hdr_put(msg, 0, 0, 0, NL80211_CMD_REG_CHANGE);
if (!hdr) {
nlmsg_free(msg);
return;
}
/* Userspace can always count this one always being set */
NLA_PUT_U8(msg, NL80211_ATTR_REG_INITIATOR, request->initiator);
if (request->alpha2[0] == '0' && request->alpha2[1] == '0')
NLA_PUT_U8(msg, NL80211_ATTR_REG_TYPE,
NL80211_REGDOM_TYPE_WORLD);
else if (request->alpha2[0] == '9' && request->alpha2[1] == '9')
NLA_PUT_U8(msg, NL80211_ATTR_REG_TYPE,
NL80211_REGDOM_TYPE_CUSTOM_WORLD);
else if ((request->alpha2[0] == '9' && request->alpha2[1] == '8') ||
request->intersect)
NLA_PUT_U8(msg, NL80211_ATTR_REG_TYPE,
NL80211_REGDOM_TYPE_INTERSECTION);
else {
NLA_PUT_U8(msg, NL80211_ATTR_REG_TYPE,
NL80211_REGDOM_TYPE_COUNTRY);
NLA_PUT_STRING(msg, NL80211_ATTR_REG_ALPHA2, request->alpha2);
}
if (wiphy_idx_valid(request->wiphy_idx))
NLA_PUT_U32(msg, NL80211_ATTR_WIPHY, request->wiphy_idx);
if (genlmsg_end(msg, hdr) < 0) {
nlmsg_free(msg);
return;
}
genlmsg_multicast(msg, 0, nl80211_regulatory_mcgrp.id, GFP_KERNEL);
return;
nla_put_failure:
genlmsg_cancel(msg, hdr);
nlmsg_free(msg);
}
static void nl80211_send_mlme_event(struct cfg80211_registered_device *rdev,
struct net_device *netdev,
const u8 *buf, size_t len,
enum nl80211_commands cmd, gfp_t gfp)
{
struct sk_buff *msg;
void *hdr;
msg = nlmsg_new(NLMSG_DEFAULT_SIZE, gfp);
if (!msg)
return;
hdr = nl80211hdr_put(msg, 0, 0, 0, cmd);
if (!hdr) {
nlmsg_free(msg);
return;
}
NLA_PUT_U32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx);
NLA_PUT_U32(msg, NL80211_ATTR_IFINDEX, netdev->ifindex);
NLA_PUT(msg, NL80211_ATTR_FRAME, len, buf);
if (genlmsg_end(msg, hdr) < 0) {
nlmsg_free(msg);
return;
}
genlmsg_multicast(msg, 0, nl80211_mlme_mcgrp.id, gfp);
return;
nla_put_failure:
genlmsg_cancel(msg, hdr);
nlmsg_free(msg);
}
void nl80211_send_rx_auth(struct cfg80211_registered_device *rdev,
struct net_device *netdev, const u8 *buf,
size_t len, gfp_t gfp)
{
nl80211_send_mlme_event(rdev, netdev, buf, len,
NL80211_CMD_AUTHENTICATE, gfp);
}
void nl80211_send_rx_assoc(struct cfg80211_registered_device *rdev,
struct net_device *netdev, const u8 *buf,
size_t len, gfp_t gfp)
{
nl80211_send_mlme_event(rdev, netdev, buf, len,
NL80211_CMD_ASSOCIATE, gfp);
}
void nl80211_send_deauth(struct cfg80211_registered_device *rdev,
struct net_device *netdev, const u8 *buf,
size_t len, gfp_t gfp)
{
nl80211_send_mlme_event(rdev, netdev, buf, len,
NL80211_CMD_DEAUTHENTICATE, gfp);
}
void nl80211_send_disassoc(struct cfg80211_registered_device *rdev,
struct net_device *netdev, const u8 *buf,
size_t len, gfp_t gfp)
{
nl80211_send_mlme_event(rdev, netdev, buf, len,
NL80211_CMD_DISASSOCIATE, gfp);
}
static void nl80211_send_mlme_timeout(struct cfg80211_registered_device *rdev,
struct net_device *netdev, int cmd,
const u8 *addr, gfp_t gfp)
{
struct sk_buff *msg;
void *hdr;
msg = nlmsg_new(NLMSG_DEFAULT_SIZE, gfp);
if (!msg)
return;
hdr = nl80211hdr_put(msg, 0, 0, 0, cmd);
if (!hdr) {
nlmsg_free(msg);
return;
}
NLA_PUT_U32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx);
NLA_PUT_U32(msg, NL80211_ATTR_IFINDEX, netdev->ifindex);
NLA_PUT_FLAG(msg, NL80211_ATTR_TIMED_OUT);
NLA_PUT(msg, NL80211_ATTR_MAC, ETH_ALEN, addr);
if (genlmsg_end(msg, hdr) < 0) {
nlmsg_free(msg);
return;
}
genlmsg_multicast(msg, 0, nl80211_mlme_mcgrp.id, gfp);
return;
nla_put_failure:
genlmsg_cancel(msg, hdr);
nlmsg_free(msg);
}
void nl80211_send_auth_timeout(struct cfg80211_registered_device *rdev,
struct net_device *netdev, const u8 *addr,
gfp_t gfp)
{
nl80211_send_mlme_timeout(rdev, netdev, NL80211_CMD_AUTHENTICATE,
addr, gfp);
}
void nl80211_send_assoc_timeout(struct cfg80211_registered_device *rdev,
struct net_device *netdev, const u8 *addr,
gfp_t gfp)
{
nl80211_send_mlme_timeout(rdev, netdev, NL80211_CMD_ASSOCIATE,
addr, gfp);
}
void nl80211_send_connect_result(struct cfg80211_registered_device *rdev,
struct net_device *netdev, const u8 *bssid,
const u8 *req_ie, size_t req_ie_len,
const u8 *resp_ie, size_t resp_ie_len,
u16 status, gfp_t gfp)
{
struct sk_buff *msg;
void *hdr;
msg = nlmsg_new(NLMSG_GOODSIZE, gfp);
if (!msg)
return;
hdr = nl80211hdr_put(msg, 0, 0, 0, NL80211_CMD_CONNECT);
if (!hdr) {
nlmsg_free(msg);
return;
}
NLA_PUT_U32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx);
NLA_PUT_U32(msg, NL80211_ATTR_IFINDEX, netdev->ifindex);
if (bssid)
NLA_PUT(msg, NL80211_ATTR_MAC, ETH_ALEN, bssid);
NLA_PUT_U16(msg, NL80211_ATTR_STATUS_CODE, status);
if (req_ie)
NLA_PUT(msg, NL80211_ATTR_REQ_IE, req_ie_len, req_ie);
if (resp_ie)
NLA_PUT(msg, NL80211_ATTR_RESP_IE, resp_ie_len, resp_ie);
if (genlmsg_end(msg, hdr) < 0) {
nlmsg_free(msg);
return;
}
genlmsg_multicast(msg, 0, nl80211_mlme_mcgrp.id, gfp);
return;
nla_put_failure:
genlmsg_cancel(msg, hdr);
nlmsg_free(msg);
}
void nl80211_send_roamed(struct cfg80211_registered_device *rdev,
struct net_device *netdev, const u8 *bssid,
const u8 *req_ie, size_t req_ie_len,
const u8 *resp_ie, size_t resp_ie_len, gfp_t gfp)
{
struct sk_buff *msg;
void *hdr;
msg = nlmsg_new(NLMSG_GOODSIZE, gfp);
if (!msg)
return;
hdr = nl80211hdr_put(msg, 0, 0, 0, NL80211_CMD_ROAM);
if (!hdr) {
nlmsg_free(msg);
return;
}
NLA_PUT_U32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx);
NLA_PUT_U32(msg, NL80211_ATTR_IFINDEX, netdev->ifindex);
NLA_PUT(msg, NL80211_ATTR_MAC, ETH_ALEN, bssid);
if (req_ie)
NLA_PUT(msg, NL80211_ATTR_REQ_IE, req_ie_len, req_ie);
if (resp_ie)
NLA_PUT(msg, NL80211_ATTR_RESP_IE, resp_ie_len, resp_ie);
if (genlmsg_end(msg, hdr) < 0) {
nlmsg_free(msg);
return;
}
genlmsg_multicast(msg, 0, nl80211_mlme_mcgrp.id, gfp);
return;
nla_put_failure:
genlmsg_cancel(msg, hdr);
nlmsg_free(msg);
}
void nl80211_send_disconnected(struct cfg80211_registered_device *rdev,
struct net_device *netdev, u16 reason,
u8 *ie, size_t ie_len, bool from_ap, gfp_t gfp)
{
struct sk_buff *msg;
void *hdr;
msg = nlmsg_new(NLMSG_GOODSIZE, gfp);
if (!msg)
return;
hdr = nl80211hdr_put(msg, 0, 0, 0, NL80211_CMD_DISCONNECT);
if (!hdr) {
nlmsg_free(msg);
return;
}
NLA_PUT_U32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx);
NLA_PUT_U32(msg, NL80211_ATTR_IFINDEX, netdev->ifindex);
if (from_ap && reason)
NLA_PUT_U16(msg, NL80211_ATTR_REASON_CODE, reason);
if (from_ap)
NLA_PUT_FLAG(msg, NL80211_ATTR_DISCONNECTED_BY_AP);
if (ie)
NLA_PUT(msg, NL80211_ATTR_IE, ie_len, ie);
if (genlmsg_end(msg, hdr) < 0) {
nlmsg_free(msg);
return;
}
genlmsg_multicast(msg, 0, nl80211_mlme_mcgrp.id, gfp);
return;
nla_put_failure:
genlmsg_cancel(msg, hdr);
nlmsg_free(msg);
}
void nl80211_send_ibss_bssid(struct cfg80211_registered_device *rdev,
struct net_device *netdev, const u8 *bssid,
gfp_t gfp)
{
struct sk_buff *msg;
void *hdr;
msg = nlmsg_new(NLMSG_DEFAULT_SIZE, gfp);
if (!msg)
return;
hdr = nl80211hdr_put(msg, 0, 0, 0, NL80211_CMD_JOIN_IBSS);
if (!hdr) {
nlmsg_free(msg);
return;
}
NLA_PUT_U32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx);
NLA_PUT_U32(msg, NL80211_ATTR_IFINDEX, netdev->ifindex);
NLA_PUT(msg, NL80211_ATTR_MAC, ETH_ALEN, bssid);
if (genlmsg_end(msg, hdr) < 0) {
nlmsg_free(msg);
return;
}
genlmsg_multicast(msg, 0, nl80211_mlme_mcgrp.id, gfp);
return;
nla_put_failure:
genlmsg_cancel(msg, hdr);
nlmsg_free(msg);
}
void nl80211_michael_mic_failure(struct cfg80211_registered_device *rdev,
struct net_device *netdev, const u8 *addr,
enum nl80211_key_type key_type, int key_id,
const u8 *tsc, gfp_t gfp)
{
struct sk_buff *msg;
void *hdr;
msg = nlmsg_new(NLMSG_DEFAULT_SIZE, gfp);
if (!msg)
return;
hdr = nl80211hdr_put(msg, 0, 0, 0, NL80211_CMD_MICHAEL_MIC_FAILURE);
if (!hdr) {
nlmsg_free(msg);
return;
}
NLA_PUT_U32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx);
NLA_PUT_U32(msg, NL80211_ATTR_IFINDEX, netdev->ifindex);
if (addr)
NLA_PUT(msg, NL80211_ATTR_MAC, ETH_ALEN, addr);
NLA_PUT_U32(msg, NL80211_ATTR_KEY_TYPE, key_type);
NLA_PUT_U8(msg, NL80211_ATTR_KEY_IDX, key_id);
if (tsc)
NLA_PUT(msg, NL80211_ATTR_KEY_SEQ, 6, tsc);
if (genlmsg_end(msg, hdr) < 0) {
nlmsg_free(msg);
return;
}
genlmsg_multicast(msg, 0, nl80211_mlme_mcgrp.id, gfp);
return;
nla_put_failure:
genlmsg_cancel(msg, hdr);
nlmsg_free(msg);
}
void nl80211_send_beacon_hint_event(struct wiphy *wiphy,
struct ieee80211_channel *channel_before,
struct ieee80211_channel *channel_after)
{
struct sk_buff *msg;
void *hdr;
struct nlattr *nl_freq;
msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_ATOMIC);
if (!msg)
return;
hdr = nl80211hdr_put(msg, 0, 0, 0, NL80211_CMD_REG_BEACON_HINT);
if (!hdr) {
nlmsg_free(msg);
return;
}
/*
* Since we are applying the beacon hint to a wiphy we know its
* wiphy_idx is valid
*/
NLA_PUT_U32(msg, NL80211_ATTR_WIPHY, get_wiphy_idx(wiphy));
/* Before */
nl_freq = nla_nest_start(msg, NL80211_ATTR_FREQ_BEFORE);
if (!nl_freq)
goto nla_put_failure;
if (nl80211_msg_put_channel(msg, channel_before))
goto nla_put_failure;
nla_nest_end(msg, nl_freq);
/* After */
nl_freq = nla_nest_start(msg, NL80211_ATTR_FREQ_AFTER);
if (!nl_freq)
goto nla_put_failure;
if (nl80211_msg_put_channel(msg, channel_after))
goto nla_put_failure;
nla_nest_end(msg, nl_freq);
if (genlmsg_end(msg, hdr) < 0) {
nlmsg_free(msg);
return;
}
genlmsg_multicast(msg, 0, nl80211_regulatory_mcgrp.id, GFP_ATOMIC);
return;
nla_put_failure:
genlmsg_cancel(msg, hdr);
nlmsg_free(msg);
}
/* initialisation/exit functions */
int nl80211_init(void)
{
int err;
err = genl_register_family_with_ops(&nl80211_fam,
nl80211_ops, ARRAY_SIZE(nl80211_ops));
if (err)
return err;
err = genl_register_mc_group(&nl80211_fam, &nl80211_config_mcgrp);
if (err)
goto err_out;
err = genl_register_mc_group(&nl80211_fam, &nl80211_scan_mcgrp);
if (err)
goto err_out;
err = genl_register_mc_group(&nl80211_fam, &nl80211_regulatory_mcgrp);
if (err)
goto err_out;
err = genl_register_mc_group(&nl80211_fam, &nl80211_mlme_mcgrp);
if (err)
goto err_out;
#ifdef CONFIG_NL80211_TESTMODE
err = genl_register_mc_group(&nl80211_fam, &nl80211_testmode_mcgrp);
if (err)
goto err_out;
#endif
return 0;
err_out:
genl_unregister_family(&nl80211_fam);
return err;
}
void nl80211_exit(void)
{
genl_unregister_family(&nl80211_fam);
}