aha/include/trace/events/sched.h

382 lines
8.7 KiB
C
Raw Normal View History

#undef TRACE_SYSTEM
#define TRACE_SYSTEM sched
#if !defined(_TRACE_SCHED_H) || defined(TRACE_HEADER_MULTI_READ)
#define _TRACE_SCHED_H
#include <linux/sched.h>
#include <linux/tracepoint.h>
/*
* Tracepoint for calling kthread_stop, performed to end a kthread:
*/
TRACE_EVENT(sched_kthread_stop,
TP_PROTO(struct task_struct *t),
TP_ARGS(t),
TP_STRUCT__entry(
__array( char, comm, TASK_COMM_LEN )
__field( pid_t, pid )
),
TP_fast_assign(
memcpy(__entry->comm, t->comm, TASK_COMM_LEN);
__entry->pid = t->pid;
),
events: Harmonize event field names and print output names Now that we can filter based on fields via perf record, people will start using filter expressions and will expect them to be obvious. The primary way to see which fields are available is by looking at the trace output, such as: gcc-18676 [000] 343.011728: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.012727: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.032692: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.033690: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.034687: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.035686: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.036684: irq_handler_entry: irq=0 handler=timer While 'irq==0' filters work, the 'handler==<x>' filter expression does not work: $ perf record -R -f -a -e irq:irq_handler_entry --filter handler=timer sleep 1 Error: failed to set filter with 22 (Invalid argument) The problem is that while an 'irq' field exists and is recognized as a filter field - 'handler' does not exist - its name is 'name' in the output. To solve this, we need to synchronize the printout and the field names, wherever possible. In cases where the printout prints a non-field, we enclose that information in square brackets, such as: perf-1380 [013] 724.903505: softirq_exit: vec=9 [action=RCU] perf-1380 [013] 724.904482: softirq_exit: vec=1 [action=TIMER] This way users can use filter expressions more intuitively: all fields that show up as 'primary' (non-bracketed) information is filterable. This patch harmonizes the field names for all irq, bkl, power, sched and timer events. We might in fact think about dropping the print format bit of generic tracepoints altogether, and just print the fields that are being recorded. Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 09:50:39 +00:00
TP_printk("comm=%s pid=%d", __entry->comm, __entry->pid)
);
/*
* Tracepoint for the return value of the kthread stopping:
*/
TRACE_EVENT(sched_kthread_stop_ret,
TP_PROTO(int ret),
TP_ARGS(ret),
TP_STRUCT__entry(
__field( int, ret )
),
TP_fast_assign(
__entry->ret = ret;
),
events: Harmonize event field names and print output names Now that we can filter based on fields via perf record, people will start using filter expressions and will expect them to be obvious. The primary way to see which fields are available is by looking at the trace output, such as: gcc-18676 [000] 343.011728: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.012727: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.032692: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.033690: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.034687: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.035686: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.036684: irq_handler_entry: irq=0 handler=timer While 'irq==0' filters work, the 'handler==<x>' filter expression does not work: $ perf record -R -f -a -e irq:irq_handler_entry --filter handler=timer sleep 1 Error: failed to set filter with 22 (Invalid argument) The problem is that while an 'irq' field exists and is recognized as a filter field - 'handler' does not exist - its name is 'name' in the output. To solve this, we need to synchronize the printout and the field names, wherever possible. In cases where the printout prints a non-field, we enclose that information in square brackets, such as: perf-1380 [013] 724.903505: softirq_exit: vec=9 [action=RCU] perf-1380 [013] 724.904482: softirq_exit: vec=1 [action=TIMER] This way users can use filter expressions more intuitively: all fields that show up as 'primary' (non-bracketed) information is filterable. This patch harmonizes the field names for all irq, bkl, power, sched and timer events. We might in fact think about dropping the print format bit of generic tracepoints altogether, and just print the fields that are being recorded. Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 09:50:39 +00:00
TP_printk("ret=%d", __entry->ret)
);
/*
* Tracepoint for waiting on task to unschedule:
*
* (NOTE: the 'rq' argument is not used by generic trace events,
* but used by the latency tracer plugin. )
*/
TRACE_EVENT(sched_wait_task,
TP_PROTO(struct rq *rq, struct task_struct *p),
TP_ARGS(rq, p),
TP_STRUCT__entry(
__array( char, comm, TASK_COMM_LEN )
__field( pid_t, pid )
__field( int, prio )
),
TP_fast_assign(
memcpy(__entry->comm, p->comm, TASK_COMM_LEN);
__entry->pid = p->pid;
__entry->prio = p->prio;
),
events: Harmonize event field names and print output names Now that we can filter based on fields via perf record, people will start using filter expressions and will expect them to be obvious. The primary way to see which fields are available is by looking at the trace output, such as: gcc-18676 [000] 343.011728: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.012727: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.032692: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.033690: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.034687: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.035686: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.036684: irq_handler_entry: irq=0 handler=timer While 'irq==0' filters work, the 'handler==<x>' filter expression does not work: $ perf record -R -f -a -e irq:irq_handler_entry --filter handler=timer sleep 1 Error: failed to set filter with 22 (Invalid argument) The problem is that while an 'irq' field exists and is recognized as a filter field - 'handler' does not exist - its name is 'name' in the output. To solve this, we need to synchronize the printout and the field names, wherever possible. In cases where the printout prints a non-field, we enclose that information in square brackets, such as: perf-1380 [013] 724.903505: softirq_exit: vec=9 [action=RCU] perf-1380 [013] 724.904482: softirq_exit: vec=1 [action=TIMER] This way users can use filter expressions more intuitively: all fields that show up as 'primary' (non-bracketed) information is filterable. This patch harmonizes the field names for all irq, bkl, power, sched and timer events. We might in fact think about dropping the print format bit of generic tracepoints altogether, and just print the fields that are being recorded. Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 09:50:39 +00:00
TP_printk("comm=%s pid=%d prio=%d",
__entry->comm, __entry->pid, __entry->prio)
);
/*
* Tracepoint for waking up a task:
*
* (NOTE: the 'rq' argument is not used by generic trace events,
* but used by the latency tracer plugin. )
*/
DECLARE_EVENT_CLASS(sched_wakeup_template,
TP_PROTO(struct rq *rq, struct task_struct *p, int success),
TP_ARGS(rq, p, success),
TP_STRUCT__entry(
__array( char, comm, TASK_COMM_LEN )
__field( pid_t, pid )
__field( int, prio )
__field( int, success )
events: Harmonize event field names and print output names Now that we can filter based on fields via perf record, people will start using filter expressions and will expect them to be obvious. The primary way to see which fields are available is by looking at the trace output, such as: gcc-18676 [000] 343.011728: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.012727: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.032692: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.033690: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.034687: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.035686: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.036684: irq_handler_entry: irq=0 handler=timer While 'irq==0' filters work, the 'handler==<x>' filter expression does not work: $ perf record -R -f -a -e irq:irq_handler_entry --filter handler=timer sleep 1 Error: failed to set filter with 22 (Invalid argument) The problem is that while an 'irq' field exists and is recognized as a filter field - 'handler' does not exist - its name is 'name' in the output. To solve this, we need to synchronize the printout and the field names, wherever possible. In cases where the printout prints a non-field, we enclose that information in square brackets, such as: perf-1380 [013] 724.903505: softirq_exit: vec=9 [action=RCU] perf-1380 [013] 724.904482: softirq_exit: vec=1 [action=TIMER] This way users can use filter expressions more intuitively: all fields that show up as 'primary' (non-bracketed) information is filterable. This patch harmonizes the field names for all irq, bkl, power, sched and timer events. We might in fact think about dropping the print format bit of generic tracepoints altogether, and just print the fields that are being recorded. Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 09:50:39 +00:00
__field( int, target_cpu )
),
TP_fast_assign(
memcpy(__entry->comm, p->comm, TASK_COMM_LEN);
__entry->pid = p->pid;
__entry->prio = p->prio;
__entry->success = success;
events: Harmonize event field names and print output names Now that we can filter based on fields via perf record, people will start using filter expressions and will expect them to be obvious. The primary way to see which fields are available is by looking at the trace output, such as: gcc-18676 [000] 343.011728: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.012727: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.032692: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.033690: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.034687: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.035686: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.036684: irq_handler_entry: irq=0 handler=timer While 'irq==0' filters work, the 'handler==<x>' filter expression does not work: $ perf record -R -f -a -e irq:irq_handler_entry --filter handler=timer sleep 1 Error: failed to set filter with 22 (Invalid argument) The problem is that while an 'irq' field exists and is recognized as a filter field - 'handler' does not exist - its name is 'name' in the output. To solve this, we need to synchronize the printout and the field names, wherever possible. In cases where the printout prints a non-field, we enclose that information in square brackets, such as: perf-1380 [013] 724.903505: softirq_exit: vec=9 [action=RCU] perf-1380 [013] 724.904482: softirq_exit: vec=1 [action=TIMER] This way users can use filter expressions more intuitively: all fields that show up as 'primary' (non-bracketed) information is filterable. This patch harmonizes the field names for all irq, bkl, power, sched and timer events. We might in fact think about dropping the print format bit of generic tracepoints altogether, and just print the fields that are being recorded. Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 09:50:39 +00:00
__entry->target_cpu = task_cpu(p);
),
events: Harmonize event field names and print output names Now that we can filter based on fields via perf record, people will start using filter expressions and will expect them to be obvious. The primary way to see which fields are available is by looking at the trace output, such as: gcc-18676 [000] 343.011728: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.012727: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.032692: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.033690: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.034687: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.035686: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.036684: irq_handler_entry: irq=0 handler=timer While 'irq==0' filters work, the 'handler==<x>' filter expression does not work: $ perf record -R -f -a -e irq:irq_handler_entry --filter handler=timer sleep 1 Error: failed to set filter with 22 (Invalid argument) The problem is that while an 'irq' field exists and is recognized as a filter field - 'handler' does not exist - its name is 'name' in the output. To solve this, we need to synchronize the printout and the field names, wherever possible. In cases where the printout prints a non-field, we enclose that information in square brackets, such as: perf-1380 [013] 724.903505: softirq_exit: vec=9 [action=RCU] perf-1380 [013] 724.904482: softirq_exit: vec=1 [action=TIMER] This way users can use filter expressions more intuitively: all fields that show up as 'primary' (non-bracketed) information is filterable. This patch harmonizes the field names for all irq, bkl, power, sched and timer events. We might in fact think about dropping the print format bit of generic tracepoints altogether, and just print the fields that are being recorded. Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 09:50:39 +00:00
TP_printk("comm=%s pid=%d prio=%d success=%d target_cpu=%03d",
__entry->comm, __entry->pid, __entry->prio,
events: Harmonize event field names and print output names Now that we can filter based on fields via perf record, people will start using filter expressions and will expect them to be obvious. The primary way to see which fields are available is by looking at the trace output, such as: gcc-18676 [000] 343.011728: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.012727: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.032692: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.033690: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.034687: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.035686: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.036684: irq_handler_entry: irq=0 handler=timer While 'irq==0' filters work, the 'handler==<x>' filter expression does not work: $ perf record -R -f -a -e irq:irq_handler_entry --filter handler=timer sleep 1 Error: failed to set filter with 22 (Invalid argument) The problem is that while an 'irq' field exists and is recognized as a filter field - 'handler' does not exist - its name is 'name' in the output. To solve this, we need to synchronize the printout and the field names, wherever possible. In cases where the printout prints a non-field, we enclose that information in square brackets, such as: perf-1380 [013] 724.903505: softirq_exit: vec=9 [action=RCU] perf-1380 [013] 724.904482: softirq_exit: vec=1 [action=TIMER] This way users can use filter expressions more intuitively: all fields that show up as 'primary' (non-bracketed) information is filterable. This patch harmonizes the field names for all irq, bkl, power, sched and timer events. We might in fact think about dropping the print format bit of generic tracepoints altogether, and just print the fields that are being recorded. Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 09:50:39 +00:00
__entry->success, __entry->target_cpu)
);
DEFINE_EVENT(sched_wakeup_template, sched_wakeup,
TP_PROTO(struct rq *rq, struct task_struct *p, int success),
TP_ARGS(rq, p, success));
/*
* Tracepoint for waking up a new task:
*
* (NOTE: the 'rq' argument is not used by generic trace events,
* but used by the latency tracer plugin. )
*/
DEFINE_EVENT(sched_wakeup_template, sched_wakeup_new,
TP_PROTO(struct rq *rq, struct task_struct *p, int success),
TP_ARGS(rq, p, success));
/*
* Tracepoint for task switches, performed by the scheduler:
*
* (NOTE: the 'rq' argument is not used by generic trace events,
* but used by the latency tracer plugin. )
*/
TRACE_EVENT(sched_switch,
TP_PROTO(struct rq *rq, struct task_struct *prev,
struct task_struct *next),
TP_ARGS(rq, prev, next),
TP_STRUCT__entry(
__array( char, prev_comm, TASK_COMM_LEN )
__field( pid_t, prev_pid )
__field( int, prev_prio )
__field( long, prev_state )
__array( char, next_comm, TASK_COMM_LEN )
__field( pid_t, next_pid )
__field( int, next_prio )
),
TP_fast_assign(
memcpy(__entry->next_comm, next->comm, TASK_COMM_LEN);
__entry->prev_pid = prev->pid;
__entry->prev_prio = prev->prio;
__entry->prev_state = prev->state;
memcpy(__entry->prev_comm, prev->comm, TASK_COMM_LEN);
__entry->next_pid = next->pid;
__entry->next_prio = next->prio;
),
events: Harmonize event field names and print output names Now that we can filter based on fields via perf record, people will start using filter expressions and will expect them to be obvious. The primary way to see which fields are available is by looking at the trace output, such as: gcc-18676 [000] 343.011728: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.012727: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.032692: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.033690: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.034687: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.035686: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.036684: irq_handler_entry: irq=0 handler=timer While 'irq==0' filters work, the 'handler==<x>' filter expression does not work: $ perf record -R -f -a -e irq:irq_handler_entry --filter handler=timer sleep 1 Error: failed to set filter with 22 (Invalid argument) The problem is that while an 'irq' field exists and is recognized as a filter field - 'handler' does not exist - its name is 'name' in the output. To solve this, we need to synchronize the printout and the field names, wherever possible. In cases where the printout prints a non-field, we enclose that information in square brackets, such as: perf-1380 [013] 724.903505: softirq_exit: vec=9 [action=RCU] perf-1380 [013] 724.904482: softirq_exit: vec=1 [action=TIMER] This way users can use filter expressions more intuitively: all fields that show up as 'primary' (non-bracketed) information is filterable. This patch harmonizes the field names for all irq, bkl, power, sched and timer events. We might in fact think about dropping the print format bit of generic tracepoints altogether, and just print the fields that are being recorded. Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 09:50:39 +00:00
TP_printk("prev_comm=%s prev_pid=%d prev_prio=%d prev_state=%s ==> next_comm=%s next_pid=%d next_prio=%d",
__entry->prev_comm, __entry->prev_pid, __entry->prev_prio,
__entry->prev_state ?
__print_flags(__entry->prev_state, "|",
{ 1, "S"} , { 2, "D" }, { 4, "T" }, { 8, "t" },
{ 16, "Z" }, { 32, "X" }, { 64, "x" },
{ 128, "W" }) : "R",
__entry->next_comm, __entry->next_pid, __entry->next_prio)
);
/*
* Tracepoint for a task being migrated:
*/
TRACE_EVENT(sched_migrate_task,
TP_PROTO(struct task_struct *p, int dest_cpu),
TP_ARGS(p, dest_cpu),
TP_STRUCT__entry(
__array( char, comm, TASK_COMM_LEN )
__field( pid_t, pid )
__field( int, prio )
__field( int, orig_cpu )
__field( int, dest_cpu )
),
TP_fast_assign(
memcpy(__entry->comm, p->comm, TASK_COMM_LEN);
__entry->pid = p->pid;
__entry->prio = p->prio;
__entry->orig_cpu = task_cpu(p);
__entry->dest_cpu = dest_cpu;
),
events: Harmonize event field names and print output names Now that we can filter based on fields via perf record, people will start using filter expressions and will expect them to be obvious. The primary way to see which fields are available is by looking at the trace output, such as: gcc-18676 [000] 343.011728: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.012727: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.032692: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.033690: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.034687: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.035686: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.036684: irq_handler_entry: irq=0 handler=timer While 'irq==0' filters work, the 'handler==<x>' filter expression does not work: $ perf record -R -f -a -e irq:irq_handler_entry --filter handler=timer sleep 1 Error: failed to set filter with 22 (Invalid argument) The problem is that while an 'irq' field exists and is recognized as a filter field - 'handler' does not exist - its name is 'name' in the output. To solve this, we need to synchronize the printout and the field names, wherever possible. In cases where the printout prints a non-field, we enclose that information in square brackets, such as: perf-1380 [013] 724.903505: softirq_exit: vec=9 [action=RCU] perf-1380 [013] 724.904482: softirq_exit: vec=1 [action=TIMER] This way users can use filter expressions more intuitively: all fields that show up as 'primary' (non-bracketed) information is filterable. This patch harmonizes the field names for all irq, bkl, power, sched and timer events. We might in fact think about dropping the print format bit of generic tracepoints altogether, and just print the fields that are being recorded. Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 09:50:39 +00:00
TP_printk("comm=%s pid=%d prio=%d orig_cpu=%d dest_cpu=%d",
__entry->comm, __entry->pid, __entry->prio,
__entry->orig_cpu, __entry->dest_cpu)
);
DECLARE_EVENT_CLASS(sched_process_template,
TP_PROTO(struct task_struct *p),
TP_ARGS(p),
TP_STRUCT__entry(
__array( char, comm, TASK_COMM_LEN )
__field( pid_t, pid )
__field( int, prio )
),
TP_fast_assign(
memcpy(__entry->comm, p->comm, TASK_COMM_LEN);
__entry->pid = p->pid;
__entry->prio = p->prio;
),
events: Harmonize event field names and print output names Now that we can filter based on fields via perf record, people will start using filter expressions and will expect them to be obvious. The primary way to see which fields are available is by looking at the trace output, such as: gcc-18676 [000] 343.011728: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.012727: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.032692: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.033690: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.034687: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.035686: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.036684: irq_handler_entry: irq=0 handler=timer While 'irq==0' filters work, the 'handler==<x>' filter expression does not work: $ perf record -R -f -a -e irq:irq_handler_entry --filter handler=timer sleep 1 Error: failed to set filter with 22 (Invalid argument) The problem is that while an 'irq' field exists and is recognized as a filter field - 'handler' does not exist - its name is 'name' in the output. To solve this, we need to synchronize the printout and the field names, wherever possible. In cases where the printout prints a non-field, we enclose that information in square brackets, such as: perf-1380 [013] 724.903505: softirq_exit: vec=9 [action=RCU] perf-1380 [013] 724.904482: softirq_exit: vec=1 [action=TIMER] This way users can use filter expressions more intuitively: all fields that show up as 'primary' (non-bracketed) information is filterable. This patch harmonizes the field names for all irq, bkl, power, sched and timer events. We might in fact think about dropping the print format bit of generic tracepoints altogether, and just print the fields that are being recorded. Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 09:50:39 +00:00
TP_printk("comm=%s pid=%d prio=%d",
__entry->comm, __entry->pid, __entry->prio)
);
/*
* Tracepoint for freeing a task:
*/
DEFINE_EVENT(sched_process_template, sched_process_free,
TP_PROTO(struct task_struct *p),
TP_ARGS(p));
/*
* Tracepoint for a task exiting:
*/
DEFINE_EVENT(sched_process_template, sched_process_exit,
TP_PROTO(struct task_struct *p),
TP_ARGS(p));
/*
* Tracepoint for a waiting task:
*/
TRACE_EVENT(sched_process_wait,
TP_PROTO(struct pid *pid),
TP_ARGS(pid),
TP_STRUCT__entry(
__array( char, comm, TASK_COMM_LEN )
__field( pid_t, pid )
__field( int, prio )
),
TP_fast_assign(
memcpy(__entry->comm, current->comm, TASK_COMM_LEN);
__entry->pid = pid_nr(pid);
__entry->prio = current->prio;
),
events: Harmonize event field names and print output names Now that we can filter based on fields via perf record, people will start using filter expressions and will expect them to be obvious. The primary way to see which fields are available is by looking at the trace output, such as: gcc-18676 [000] 343.011728: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.012727: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.032692: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.033690: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.034687: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.035686: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.036684: irq_handler_entry: irq=0 handler=timer While 'irq==0' filters work, the 'handler==<x>' filter expression does not work: $ perf record -R -f -a -e irq:irq_handler_entry --filter handler=timer sleep 1 Error: failed to set filter with 22 (Invalid argument) The problem is that while an 'irq' field exists and is recognized as a filter field - 'handler' does not exist - its name is 'name' in the output. To solve this, we need to synchronize the printout and the field names, wherever possible. In cases where the printout prints a non-field, we enclose that information in square brackets, such as: perf-1380 [013] 724.903505: softirq_exit: vec=9 [action=RCU] perf-1380 [013] 724.904482: softirq_exit: vec=1 [action=TIMER] This way users can use filter expressions more intuitively: all fields that show up as 'primary' (non-bracketed) information is filterable. This patch harmonizes the field names for all irq, bkl, power, sched and timer events. We might in fact think about dropping the print format bit of generic tracepoints altogether, and just print the fields that are being recorded. Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 09:50:39 +00:00
TP_printk("comm=%s pid=%d prio=%d",
__entry->comm, __entry->pid, __entry->prio)
);
/*
* Tracepoint for do_fork:
*/
TRACE_EVENT(sched_process_fork,
TP_PROTO(struct task_struct *parent, struct task_struct *child),
TP_ARGS(parent, child),
TP_STRUCT__entry(
__array( char, parent_comm, TASK_COMM_LEN )
__field( pid_t, parent_pid )
__array( char, child_comm, TASK_COMM_LEN )
__field( pid_t, child_pid )
),
TP_fast_assign(
memcpy(__entry->parent_comm, parent->comm, TASK_COMM_LEN);
__entry->parent_pid = parent->pid;
memcpy(__entry->child_comm, child->comm, TASK_COMM_LEN);
__entry->child_pid = child->pid;
),
events: Harmonize event field names and print output names Now that we can filter based on fields via perf record, people will start using filter expressions and will expect them to be obvious. The primary way to see which fields are available is by looking at the trace output, such as: gcc-18676 [000] 343.011728: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.012727: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.032692: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.033690: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.034687: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.035686: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.036684: irq_handler_entry: irq=0 handler=timer While 'irq==0' filters work, the 'handler==<x>' filter expression does not work: $ perf record -R -f -a -e irq:irq_handler_entry --filter handler=timer sleep 1 Error: failed to set filter with 22 (Invalid argument) The problem is that while an 'irq' field exists and is recognized as a filter field - 'handler' does not exist - its name is 'name' in the output. To solve this, we need to synchronize the printout and the field names, wherever possible. In cases where the printout prints a non-field, we enclose that information in square brackets, such as: perf-1380 [013] 724.903505: softirq_exit: vec=9 [action=RCU] perf-1380 [013] 724.904482: softirq_exit: vec=1 [action=TIMER] This way users can use filter expressions more intuitively: all fields that show up as 'primary' (non-bracketed) information is filterable. This patch harmonizes the field names for all irq, bkl, power, sched and timer events. We might in fact think about dropping the print format bit of generic tracepoints altogether, and just print the fields that are being recorded. Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 09:50:39 +00:00
TP_printk("comm=%s pid=%d child_comm=%s child_pid=%d",
__entry->parent_comm, __entry->parent_pid,
__entry->child_comm, __entry->child_pid)
);
/*
* XXX the below sched_stat tracepoints only apply to SCHED_OTHER/BATCH/IDLE
* adding sched_stat support to SCHED_FIFO/RR would be welcome.
*/
DECLARE_EVENT_CLASS(sched_stat_template,
TP_PROTO(struct task_struct *tsk, u64 delay),
TP_ARGS(tsk, delay),
TP_STRUCT__entry(
__array( char, comm, TASK_COMM_LEN )
__field( pid_t, pid )
__field( u64, delay )
),
TP_fast_assign(
memcpy(__entry->comm, tsk->comm, TASK_COMM_LEN);
__entry->pid = tsk->pid;
__entry->delay = delay;
)
TP_perf_assign(
__perf_count(delay);
),
events: Harmonize event field names and print output names Now that we can filter based on fields via perf record, people will start using filter expressions and will expect them to be obvious. The primary way to see which fields are available is by looking at the trace output, such as: gcc-18676 [000] 343.011728: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.012727: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.032692: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.033690: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.034687: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.035686: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.036684: irq_handler_entry: irq=0 handler=timer While 'irq==0' filters work, the 'handler==<x>' filter expression does not work: $ perf record -R -f -a -e irq:irq_handler_entry --filter handler=timer sleep 1 Error: failed to set filter with 22 (Invalid argument) The problem is that while an 'irq' field exists and is recognized as a filter field - 'handler' does not exist - its name is 'name' in the output. To solve this, we need to synchronize the printout and the field names, wherever possible. In cases where the printout prints a non-field, we enclose that information in square brackets, such as: perf-1380 [013] 724.903505: softirq_exit: vec=9 [action=RCU] perf-1380 [013] 724.904482: softirq_exit: vec=1 [action=TIMER] This way users can use filter expressions more intuitively: all fields that show up as 'primary' (non-bracketed) information is filterable. This patch harmonizes the field names for all irq, bkl, power, sched and timer events. We might in fact think about dropping the print format bit of generic tracepoints altogether, and just print the fields that are being recorded. Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 09:50:39 +00:00
TP_printk("comm=%s pid=%d delay=%Lu [ns]",
__entry->comm, __entry->pid,
(unsigned long long)__entry->delay)
);
/*
* Tracepoint for accounting wait time (time the task is runnable
* but not actually running due to scheduler contention).
*/
DEFINE_EVENT(sched_stat_template, sched_stat_wait,
TP_PROTO(struct task_struct *tsk, u64 delay),
TP_ARGS(tsk, delay));
/*
* Tracepoint for accounting sleep time (time the task is not runnable,
* including iowait, see below).
*/
DEFINE_EVENT(sched_stat_template, sched_stat_sleep,
TP_PROTO(struct task_struct *tsk, u64 delay),
TP_ARGS(tsk, delay));
/*
* Tracepoint for accounting iowait time (time the task is not runnable
* due to waiting on IO to complete).
*/
DEFINE_EVENT(sched_stat_template, sched_stat_iowait,
TP_PROTO(struct task_struct *tsk, u64 delay),
TP_ARGS(tsk, delay));
/*
* Tracepoint for accounting runtime (time the task is executing
* on a CPU).
*/
TRACE_EVENT(sched_stat_runtime,
TP_PROTO(struct task_struct *tsk, u64 runtime, u64 vruntime),
TP_ARGS(tsk, runtime, vruntime),
TP_STRUCT__entry(
__array( char, comm, TASK_COMM_LEN )
__field( pid_t, pid )
__field( u64, runtime )
__field( u64, vruntime )
),
TP_fast_assign(
memcpy(__entry->comm, tsk->comm, TASK_COMM_LEN);
__entry->pid = tsk->pid;
__entry->runtime = runtime;
__entry->vruntime = vruntime;
)
TP_perf_assign(
__perf_count(runtime);
),
events: Harmonize event field names and print output names Now that we can filter based on fields via perf record, people will start using filter expressions and will expect them to be obvious. The primary way to see which fields are available is by looking at the trace output, such as: gcc-18676 [000] 343.011728: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.012727: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.032692: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.033690: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.034687: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.035686: irq_handler_entry: irq=0 handler=timer cc1-18677 [000] 343.036684: irq_handler_entry: irq=0 handler=timer While 'irq==0' filters work, the 'handler==<x>' filter expression does not work: $ perf record -R -f -a -e irq:irq_handler_entry --filter handler=timer sleep 1 Error: failed to set filter with 22 (Invalid argument) The problem is that while an 'irq' field exists and is recognized as a filter field - 'handler' does not exist - its name is 'name' in the output. To solve this, we need to synchronize the printout and the field names, wherever possible. In cases where the printout prints a non-field, we enclose that information in square brackets, such as: perf-1380 [013] 724.903505: softirq_exit: vec=9 [action=RCU] perf-1380 [013] 724.904482: softirq_exit: vec=1 [action=TIMER] This way users can use filter expressions more intuitively: all fields that show up as 'primary' (non-bracketed) information is filterable. This patch harmonizes the field names for all irq, bkl, power, sched and timer events. We might in fact think about dropping the print format bit of generic tracepoints altogether, and just print the fields that are being recorded. Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-15 09:50:39 +00:00
TP_printk("comm=%s pid=%d runtime=%Lu [ns] vruntime=%Lu [ns]",
__entry->comm, __entry->pid,
(unsigned long long)__entry->runtime,
(unsigned long long)__entry->vruntime)
);
#endif /* _TRACE_SCHED_H */
tracing: create automated trace defines This patch lowers the number of places a developer must modify to add new tracepoints. The current method to add a new tracepoint into an existing system is to write the trace point macro in the trace header with one of the macros TRACE_EVENT, TRACE_FORMAT or DECLARE_TRACE, then they must add the same named item into the C file with the macro DEFINE_TRACE(name) and then add the trace point. This change cuts out the needing to add the DEFINE_TRACE(name). Every file that uses the tracepoint must still include the trace/<type>.h file, but the one C file must also add a define before the including of that file. #define CREATE_TRACE_POINTS #include <trace/mytrace.h> This will cause the trace/mytrace.h file to also produce the C code necessary to implement the trace point. Note, if more than one trace/<type>.h is used to create the C code it is best to list them all together. #define CREATE_TRACE_POINTS #include <trace/foo.h> #include <trace/bar.h> #include <trace/fido.h> Thanks to Mathieu Desnoyers and Christoph Hellwig for coming up with the cleaner solution of the define above the includes over my first design to have the C code include a "special" header. This patch converts sched, irq and lockdep and skb to use this new method. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Zhao Lei <zhaolei@cn.fujitsu.com> Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-10 13:36:00 +00:00
/* This part must be outside protection */
#include <trace/define_trace.h>